MarketsCastingsStampingSourcing SolutionsAbout UsWhy Sigma
Electrical

An extensive range of robust fittings and weatherproof products.

Automotive

Connectivity solutions such as high brackets, busbars, and connector pins.

Power Transmission & Distribution

Connectors & structural components for cutouts, transformers, & substations.

Aerospace

Complex sensor housings & fracture-critical products.

Appliances

Robust castings and assemblies for everyday appliances.

Commercial Hardware

Finished components for commercial & residential hardware applications.

Electronics & Telecom

Precision metal stamped sensors, connectors and cast housings & covers.

Fluid Power

Durable, precision products for high-pressure applications.

Food & Beverage

Handles, leveling pins, flow valves & button housings.

Lighting

Custom housings to fully assembled commercial & industrial light fixtures.

Marine

Durable corrosion-resistant engineered castings and subassemblies.

Medical & Dental

Medical-grade parts for implants, housings, manifolds, and pumps.

Oil & Gas

Custom housings and covers for flow control, pressure valves & meters.

Power Tools

Durable yet lightweight custom metal housings.

Solar

Innovative precision metal stamped parts.

High Pressure Die Casting

High-pressure liquid metal is pressed into a precision metal mold cavity, and then cooled & solidified under pressure.

Ideal for a wide range of applications, including automotive, agricultural, electronics, and medical.

Sand Casting

Castings with complex shapes & inner cavities that are produced in a sand mold

Ideal for parts with complex shapes and inner cavities

Gravity Die Casting

A mold is filled with liquid metal using gravity and cooled and solidified in the mold to obtain a casting

Ideal for parts with complex shapes made with steel, aluminum or magnesium alloys

Investment Casting

A process used to obtain a mold without a parting surface; creates parts with high dimensional & geometric accuracy

Ideal for near-net shaped parts with complex shapes and high precision requirements

Partner Services

Custom Tooling, Machining, Surface Finishing, Special Purpose Machine Design & Development

Precision Metal Stamping

More than 80 presses convert metal sheets into custom parts

Ideal for parts for electronic connectors and microprocessor chips

Swiss Screw Machining

A specialized CNC machine capable of producing extremely small, precise parts

Ideal for complex miniature screws, contact pins & micro-fasteners

Partner Services

Rapid Prototypes, Heat Treating, Automated Assembly

Company History

Learn more about our company milestones.

Plant Locations

Learn more about our global manufacturing facilities.

Company News

See our company announcements and press releases.

Contact Us

Let us know how we can help create a solution for you

Resources

Download catalogs and key product guides.

Global Code of Conduct

Download our Code of Conduct and report violations.

Innovation at Sigma

Purposeful innovation – the continual improvement and innovation of custom-designed and precision-made products and solutions.

Engineered Solutions

Sigma offers solutions for complex product characteristics and technical requirements.

Global Supply Chain Management

U.S.-based supply chain management teams support our customers.

Partner Services

Sigma is a vertically integrated single-source solution provider.

Sub Category: Rigid

< Products

Conduit-to-Box Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number
PE050CBG
PE075CBG
PE100CBG
PE125CBG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Water Tight Hub

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Water Tight Hub
Feature(s): Insulated

Water tight hubs are used to terminate rigid threaded conduit or IMC to enclosure.

  • Assembled with 90°C rated insulator and rubber sealing ring
  • UL listed and CSA certified for wet locations
  • Meets NEMA sealing requirements for Type 2, 3R, 4, 4X, 5 and 12 rated enclosures
  • Die-cast from high strength zinc alloy
Trade Size
Model Number
WTH050I
WTH075I
WTH100I
WTH125I
WTH150I
WTH200I
WTH250I
WTH300I
WTH350I
WTH400I
ABC
1.431.50.55
ABC
1.681.50.74
ABC
21.810.94
ABC
2.371.911.29
ABC
2.751.881.51
ABC
3.251.891.98
ABC
3.782.62.41
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Water Tight Ground Nut

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Water Tight Nut

Used for securing water tight hubs

  • Available with bonding screw for grounding
  • Die-cast from high strength zinc alloy
Trade Size
Model Number
WTGN050
WTGN075
WTGN100
WTGN125
WTGN150
WTGN200
WTGN250
WTGN300
WTGN350
WTGN400
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41-13
< Products

Water Tight Hub

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Water Tight Hub

Used to terminate rigid threaded conduit or IMC to enclosure

  • UL listed and CSA certified for wet locations
  • Meets NEMA sealing requirements for Type 2, 3R, 4, 4X, 5 and 12 rated enclosures
Trade Size
Model Number
WTH050
WTH075
WTH100
WTH125
WTH150
WTH200
WTH250
WTH300
WTH350
WTH400
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Water Tight Hub with Grounding Screw

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Water Tight Hub
Feature(s): Insulated

Used to terminate rigid threaded conduit or IMC to enclosure

  • UL listed and CSA certified for wet locations
  • Meets NEMA sealing requirements for Type 2, 3R, 4, 4X, 5 and 12 rated enclosures
  • Assembled with 90°C rated insulator and rubber sealing ring
  • With bonding screw for grounding
Trade Size
Model Number
WTHG050I
WTHG075I
WTHG100I
WTHG125I
WTHG150I
WTHG200I
WTHG250I
WTHG300I
WTHG350I
WTHG400I
UL: E88878
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Three Piece Coupling

Material: Aluminum
Category: Fittings
Sub Category: Rigid
Type(s): Coupling
Connection Type(s): Three Piece

Used to connect two lengths of rigid threaded conduit or IMC, when neither conduit can be turned

Trade Size
Model Number
TPC050
TPC075
TPC100
TPC125
TPC150
TPC200
TPC250
TPC300
TPC350
TPC400
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
< Products

90° Short Radius Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Elbow
Connection Type(s): 90 DegreeShort Radius

Used to connect threaded rigid conduit or IMC to a steel box or other enclosure where a close radius is desired

Trade Size
Model Number
SRE050
SRE075
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Conduit Body Cover

Material: Stamped Steel
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Cover

Used in conjunction with gaskets when assembling conduit bodies to cover openings

  • Stamped steel covers used with malleable iron conduit bodies
  • Includes captive zinc plated, steel mounting screws
Trade Size
Model Number
SSC050
SSC075
SSC100
SSC150
SSC200
SSC300
SSC400
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Service Entrance Elbow Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Assembled with fiber gasket and aluminum die cast cover
  • UL listed for wet location use
  • Die cast from high strength, corrosion and weather resistant aluminum alloy
  • Extra long design
Trade Size
Model Number
SLBXL125
SLBXL200
Volume
24.3
Volume
63
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Locknut

Material: Steel
Category: Fittings
Sub Category: Rigid
Type(s): Locknut

Conduit locknuts are used for securing Rigid conduit, IMC and other threaded connectors to a steel outlet box or metal enclosure.

Trade Size
Model Number
SLN037
SLN050
SLN075
SLN100
SLN125
SLN150
SLN200
SLN250
SLN300
SLN400
ABC
1.120.091
ABC
1.390.11.25
ABC
1.70.131.56
ABC
2.040.131.91
ABC
2.360.132.16
ABC
2.870.132.68
ABC
3.520.163.25
ABC
4.130.163.95
< Products

Service Entrance Elbow Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Service entrance ells are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance.

  • Mounts flush against structures
  • Listed for use in wet locations
  • Assembled with removable cover and fiber gasket
Trade Size
Model Number
SLB050
SLB075
SLB100
SLB125
SLB150
SLB200
ABCVolume
3.151.191.451.8
ABCVolume
3.571.521.773.8
ABCVolume
4.181.751.975.7
ABCVolume
5.392.192.4413.5
ABCVolume
6.12.362.4417
ABCVolume
6.612.872.9329.3
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Service Entrance Elbow Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Assembled with fiber gasket and aluminum die cast cover
  • UL listed for wet location use
  • Die cast from high strength, corrosion and weather resistant aluminum alloy
Trade Size
Model Number
SLB050CN
SLB075CN
SLB100CN
Volume
1.8
Volume
3.8
Volume
5.7
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Insulated Set Screw Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • With 90° C rated insulator
  • Concrete-tight when taped
  • 1-1/4″ to 4″ double set screw
Trade Size
Model Number
SCON050I
SCON075I
SCON100I
SCON125I
SCON150I
SCON200I
SCON250I
SCON300I
SCON350I
SCON400I
ABC
1.140.390.72
ABC
1.410.460.93
ABC
1.530.531.17
ABC
2.020.631.52
ABC
2.250.711.75
ABC
2.550.752.2
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Reducing Washer

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Rigid
Type(s): Washer
Connection Type(s): Reducing

Reducing washers are used to reduce the size of a knockout in a steel outlet box or metal enclosure. Two reducing washers are required for each knockout.

  • Embossed for self-centering
Trade Size
Model Number
RW075/050
RW100/050
RW100/075
RW125/050
RW125/075
RW125/100
RW150/050
RW150/075
RW150/100
RW150/125
RW200/050
RW200/075
RW200/100
RW200/125
RW200/150
RW250/050
RW250/075
RW250/100
RW250/125
RW250/150
RW250/200
ABC
0.871.440.04
ABC
0.871.750.04
ABC
1.111.750.04
ABC
0.872.190.04
ABC
1.112.190.04
ABC
1.372.190.04
ABC
0.872.440.04
ABC
1.372.440.04
ABC
1.722.440.04
ABC
1.7230.04
ABC
1.9830.04
ABC
2.463.50.04
cULus: E121487
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid Set Screw Connectors

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Connector
Connection Type(s): Set Screw

Used to connect threadless rigid conduit or IMC to a steel box or other enclosure

Trade Size
Model Number
RSCN050
RSCN075
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Threaded Coupling

Material: Galvanized Steel
Category: Fittings
Sub Category: Rigid
Type(s): Coupling
Connection Type(s): Threaded

Threaded couplings are used to join two lengths of threaded Rigid conduit or IMC.

Trade Size
Model Number
RTC050
RTC075
RTC100
RTC125
RTC150
RTC200
RTC250
ABC
1.011.630
ABC
1.251.640
ABC
1.521.970
ABC
1.872.030
ABC
2.152.060
ABC
2.652.130
ABC
3.253.190
cULus: E468931
Standards: UL 6, CSA C22.2 No. 45.1-07
< Products

Threaded Nipple

Material: Galvanized Steel
Category: Fittings
Sub Category: Rigid
Type(s): Nipple
Connection Type(s): Threaded

Threaded nipples are used to extend a length of threaded Rigid conduit or IMC. May also be used to connect two steel outlet boxes or metal enclosures together.

Trade Size
Model Number
RN050/150
RN050/200
RN050/300
RN050/400
RN050/500
RN050/600
RN050/CL
RN075/150
RN075/200
RN075/300
RN075/400
RN075/500
RN075/600
RN075/CL
RN100/200
RN100/300
RN100/600
RN100/CL
RN125/200
RN125/300
RN125/600
RN125/CL
RN150/600
RN150/CL
RN200/1000
RN200/300
RN200/400
RN200/500
RN200/600
RN200/800
RN200/CL
RN250/400
RN300/400
AB
0.51.5
AB
0.52
AB
0.53
AB
0.54
AB
0.55
AB
0.56
AB
0.51.12
AB
0.751.5
AB
0.752
AB
0.753
AB
0.754
AB
0.755
AB
0.756
AB
0.751.37
AB
12
AB
13
AB
16
AB
11.5
AB
1.252
AB
1.253
AB
1.256
AB
1.251.63
AB
1.56
AB
1.51.75
AB
21
AB
23
AB
24
AB
25
AB
26
AB
28
AB
22
AB
2.54
AB
34
cULus: E468931
Standards: UL 6, CSA C22.2 No. 45.1-07
< Products

One-Hole Strap

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Rigid
Type(s): Strap
Connection Type(s): One-Hole

One-hole straps are used for providing support for Rigid conduit or IMC as required by the National Electrical Code (NEC).

  • Snap-on type
Trade Size
Model Number
RS0501
RS0751
RS1001
RS1251
RS1501
RS2001
RS2501
RS3001
ABC
1.850.630.91
ABC
2.20.751.13
ABC
2.60.881.33
ABC
2.950.891.65
ABC
3.621.021.91
ABC
4.091.142.32
ABC
51.252.75
ABC
5.531.253.6
cULus: E229278
Standards: UL 2239, CSA C22.2 No. 18.4-15
< Products

Two-Hole Strap

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Rigid
Type(s): Strap
Connection Type(s): Two-Hole

Two-hole straps are used for providing support for Rigid conduit or IMC as required by the National Electrical Code (NEC) where higher load bearing supports are desired.

  • Snap-on type
  • ,Also listed for use with EMT and FMC
Trade Size
Model Number
RS0502
RS0752
RS1002
RS1252
RS1502
RS2002
RS2502
RS3002
RS3502
RS4002
ABC
2.480.620.87
ABC
2.910.690.98
ABC
3.370.751.3
ABC
4.090.891.61
ABC
4.410.941.91
ABC
5.1212.31
ABC
6.061.12.96
ABC
6.461.13.58
cULus: E229278
Standards: UL 2239, CSA C22.2 No. 18.4-15
< Products

90˚ Rigid Elbow

Material: Galvanized Steel
Category: Fittings
Sub Category: Rigid
Type(s): Elbow
Connection Type(s): 90 Degree

90° rigid elbows are used to connect Rigid conduit or IMC together to allow for 90° bends.

Trade Size
Model Number
REN050
REN075
REN100
REN125
REN150
REN200
ABC
4.026.381.5
ABC
4.497.441.5
ABC
5.758.841.89
ABC
7.2410.122.01
ABC
8.2711.942.01
ABC
9.4914.082.01
cULus: E468931
Standards: UL 6, CSA C22.2 No. 45.1-07
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Reducing Bushing

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): Reducing

Reducing bushings are used to reduce the entry size of threaded conduit to allow joining conduits of two different sizes.

Trade Size
Model Number
RB075/050
RB100/050
RB100/075
ABC
0.630.820.16
ABC
0.7110.14
ABC
0.7110.14
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid-to-Rigid Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeThreaded

Used to make a 90° connection with two runs of threaded rigid conduit or IMC

  • Removable aluminum cover permits access for wire pulling
  • Cast from high strength zinc alloy
Trade Size
Model Number
PE050RR
PE075RR
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid-to-Rigid Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeThreaded

Rigid-to-rigid pull elbows are used to facilitate pulling conductors through a 90° bend between two runs of threaded Rigid conduit or IMC. The removable cover gives ample access so that wire pulling can be achieved without any obstructions.

  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
PE050RRG
PE075RRG
PE100RRG
PE125RRG
ABC
1.3110.92
ABC
1.371.271.17
ABC
1.951.571.46
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Rigid-to-Box Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded

Used to make a 90° connection of Threaded Rigid conduit or IMC to a metal box or enclosure

  • Removable aluminum cover permits access for wire pulling
  • Cast from high strength zinc alloy
Trade Size
Model Number
PE050RB
PE075RB
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid-to-Box Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded

Rigid-to-box pull elbows are used to connect threaded Rigid conduit or IMC to a box where a 90° bend is required. They facilitate pulling conductors through the bend and the removable cover gives ample access so that wire pulling can be achieved without any obstructions.

  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
PE050RBG
PE075RBG
PE100RBG
PE125RBG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Offset Nipple

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Nipple
Connection Type(s): Offset

Offset nipples are used to provide an offset connection between two outlet boxes or metal enclosures.

  • 3/4″ axis
Trade Size
Model Number
ON050
ON075
ON100
ON125
ON150
ON200
ON250
ON300
ABC
2.420.940.43
ABC
2.41.180.43
ABC
2.721.450.6
ABC
2.811.810.59
ABC
3.032.050.71
ABC
3.152.570.77
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Plastic Insulating Bushing

Material: Non-Metallic
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): Insulating

Plastic insulating bushings are used on the end of Rigid conduit, IMC and other threaded connectors to provide a smooth, well-rounded bearing surface to protect wires or cables.

  • Rated 105°C
  • Flame retardant
Trade Size
Model Number
PB050
PB075
PB100
PB125
PB150
PB200
PB250
PB300
PB350
PB400
ABC
1.050.360.6
ABC
1.290.40.78
ABC
1.630.491
ABC
1.930.481.3
ABC
2.180.481.52
ABC
2.640.541.95
ABC
3.250.632.33
ABC
3.90.682.9
cULus: E121487
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Conduit-to-Conduit Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of IMC, Rigid or steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number
PE050CCG
PE075CCG
PE100CCG
PE125CCG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Conduit Body Gasket

Material: Rubber
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Gasket

Used with aluminum conduit bodies to seal enclosure with covers

Trade Size
Model Number
NG050
NG075
NG100
NG150
NG200
NG300
NG400
< Products

Conduit Body Gasket

Material: Rubber
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Gasket

Used with Form 5 conduit bodies to seal enclosure with covers

  • Can be converted to open type gaskets by tearing out center section along scored line
Trade Size
Model Number
NGT050
NGT075
NGT100
NGT150
NGT200
NGT300
NGT400
< Products

Three Piece Coupling

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Coupling
Connection Type(s): Three Piece

Used to connect two lengths of rigid threaded conduit or IMC, when neither conduit can be turned

Trade Size
Model Number
MTPC050
MTPC075
MTPC100
MTPC125
MTPC150
MTPC200
MTPC250
MTPC300
MTPC350
MTPC400
MTPC500
MTPC600
UL,cULus: E155411
CSA,: LR57925,
Standards: UL 514B, CSA C22.2 No. 18
< Products

One-Hole Strap

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: EMTRigid
Type(s): Strap
Connection Type(s): One-Hole

Used to support rigid conduit or IMC to mounting surface

  • Can be used with clamp backs
  • Cast from high strength malleable iron
    and zinc plated
  • Cast from high strength malleable iron and zinc plated
  • Approved for use with EMT and Rigid/IMC
Trade Size
Model Number
MS037
MS050
MS075
MS100
MS125
MS150
MS200
MS250
MS300
MS350
MS400
,cULus: ,E229278
,CSA: ,LR57925
Standards: UL 2239, CSA 22.2 No. 18
< Products

Conduit Body – Type X

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type X

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLX050
MLX075
MLX100
MLX125
MLX150
MLX200
Volume
5.6
Volume
9.5
Volume
15
Volume
33
Volume
36
Volume
75
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type LL

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LL

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLL050
MLL075
MLL100
MLL125
MLL150
MLL200
MLL250
MLL300
MLL350
MLL400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type LR

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LR

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLR050
MLR075
MLR100
MLR125
MLR150
MLR200
MLR250
MLR300
MLR350
MLR400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type T

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type T

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLT050
MLT075
MLT100
MLT125
MLT150
MLT200
MLT250
MLT300
MLT350
MLT400
Volume
6
Volume
9.5
Volume
15
Volume
33
Volume
36
Volume
75
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

J Clamp

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: AccessoriesEMTRigid
Type(s): J Clamp

Used to attach rigid conduit, IMC, or EMT to steel structures

  • Assembled with square head bolt
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MJ050
MJ075
MJ100
< Products

Conduit Body – Type LB

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLB050
MLB075
MLB100
MLB125
MLB150
MLB200
MLB250
MLB300
MLB350
MLB400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type C

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Threaded
Feature(s): Type C

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLC050
MLC075
MLC100
MLC125
MLC150
MLC200
MLC250
MLC300
MLC350
MLC400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-LugSet Screw
Feature(s): Insulated

Used to terminate rigid conduit or IMC to an enclosure

  • Provided with lay-in style copper lug for easy attachment of grounding wire
  • With 150°C rated insulator
Trade Size
Model Number
MGBILC250Z
MGBILC300Z
MGBILC350Z
MGBILC400Z
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
< Products

Insulated Set Screw Conduit Bushing

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): InsulatingSet Screw
Feature(s): Insulated

Used to terminate rigid conduit or IMC to an enclosure

  • Bushing throat provides a smooth surface to prevent damage to wire during pulling
  • With 150°C rated insulator
Trade Size
Model Number
MGBI050SS
MGBI075SS
MGBI100SS
MGBI125SS
MGBI150SS
MGBI200SS
MGBI250SS
MGBI300SS
MGBI350SS
MGBI400SS
MGBI500SS
MGBI600SS
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Set Screw Conduit Bushing

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): Set Screw

Used to terminate threaded rigid conduit or IMC to an enclosure

  • With 3 tapped holes
Trade Size
Model Number
MGB050T
MGB075T
MGB100T
MGB125T
MGB150T
MGB200T
MGB250T
MGB300T
MGB350T
MGB400T
MGB500T
MGB600T
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Insulated Grounding Bushing with Copper Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-Lug
Feature(s): Insulated

Used to terminate rigid conduit or IMC to an enclosure

  • Provided with lay-in style copper lug for easy attachment of grounding wire
  • With 150°C rated insulator
  • With 3 tapped holes
Trade Size
Model Number
MGBILC250T
MGBILC300T
MGBILC350T
MGBILC400T
MGBILC500T
MGBILC600T
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
< Products

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-LugSet Screw
Feature(s): Insulated

Used to terminate rigid conduit or IMC to an enclosure

  • Provided with lay-in style copper lug for easy attachment of grounding wire
  • With 150°C rated insulator
Trade Size
Model Number
MGBILC050X
MGBILC075X
MGBILC100X
MGBILC125X
MGBILC150X
MGBILC200X
MGBILC250X
MGBILC300X
MGBILC350X
MGBILC400X
MGBILC500X
MGBILC600X
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
< Products

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-LugSet Screw
Feature(s): Insulated

Used to terminate rigid conduit or IMC to an enclosure

  • Provided with lay-in style copper lug for easy attachment of grounding wire
  • With 150°C rated insulator
Trade Size
Model Number
MGBILC125Y
MGBILC150Y
MGBILC200Y
MGBILC250Y
MGBILC300Y
MGBILC350Y
MGBILC400Y
MGBILC500Y
MGBILC600Y
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
< Products

Insulated Grounding Bushing with Feed-Thru Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): Feed-thruGrounding
Feature(s): Insulated

Used to terminate threaded rigid conduit, or IMC to an enclosure

  • Provided with feed-thru aluminum lug for attaching a grounding wire
  • With 150°C rated insulator
  • With larger lug for greater range of cables
Trade Size
Model Number
MGBILB250S
MGBILB300S
MGBILB350S
MGBILB400S
cULus: E88878
Standards: UL 467 & 486A-486B, CSA C22.2 No. 41-13 & CSA C22.2 No. 65-13
< Products

Insulated Grounding Bushing with Copper Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-Lug
Feature(s): Insulated

Used to terminate rigid conduit or IMC to an enclosure

  • Provided with lay-in style copper lug for easy attachment of grounding wire
  • With 150°C rated insulator
Trade Size
Model Number
MGBILC050
MGBILC075
MGBILC100
MGBILC125
MGBILC150
MGBILC200
MGBILC250
MGBILC300
MGBILC350
MGBILC400
MGBILC500
MGBILC600
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
< Products

Insulated Grounding Bushing with Copper Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-Lug
Feature(s): Insulated

Used to terminate rigid conduit or IMC to an enclosure

  • Provided with lay-in style copper lug for easy attachment of grounding wire
  • With 150°C rated insulator
  • With larger lug for greater range of cables
Trade Size
Model Number
MGBILC125S
MGBILC150S
MGBILC200S
MGBILC250S
MGBILC300S
MGBILC350S
MGBILC400S
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
< Products

Insulated Grounding Bushing with Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-Lug
Feature(s): Insulated

Used to terminate threaded rigid conduit, or IMC to an enclosure

  • Provided with lay-in style aluminum lug for easy attachment of grounding wire
  • With 150°C rated insulator
Trade Size
Model Number
MGBILA125Y
MGBILA150Y
MGBILA200Y
MGBILA250Y
MGBILA300Y
MGBILA350Y
MGBILA400Y
MGBILA500Y
MGBILA600Y
cULus: E88878
Standards: UL 467 & 486A-486B, CSA C22.2 No. 41-13 & CSA C22.2 No. 65-13
< Products

Insulated Grounding Bushing with Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-Lug
Feature(s): Insulated

Used to terminate threaded rigid conduit, or IMC to an enclosure

  • Provided with lay-in style aluminum lug for easy attachment of grounding wire
  • With 150°C rated insulator
Trade Size
Model Number
MGBILA250Z
MGBILA300Z
MGBILA350Z
MGBILA400Z
cULus: E88878
Standards: UL 467 & 486A-486B, CSA C22.2 No. 41-13 & CSA C22.2 No. 65-13
< Products

Insulated Grounding Bushing with Feed-Thru Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): Feed-thruGrounding
Feature(s): Insulated

Used to terminate threaded rigid conduit, or IMC to an enclosure

  • Provided with feed-thru aluminum lug for attaching a grounding wire
  • With 150°C rated insulator
Trade Size
Model Number
MGBILB050
MGBILB075
MGBILB100
MGBILB125
MGBILB150
MGBILB200
MGBILB250
MGBILB300
MGBILB350
MGBILB400
MGBILB500
MGBILB600
cULus,: E88878,
Standards: UL 467 & 486A-486B, CSA C22.2 No. 41-13 & CSA C22.2 No. 65-13
< Products

Insulated Grounding Bushing with Lay-in-Lug

Material: Malleable Iron
Category: Fittings
Sub Category: Rigid
Type(s): Bushing
Connection Type(s): GroundingLay-In-Lug
Feature(s): Insulated

Used to terminate threaded rigid conduit, or IMC to an enclosure

  • Provided with lay-in style aluminum lug for easy attachment of grounding wire
  • With 150°C rated insulator
  • With larger lug for greater range of cables
Trade Size
Model Number
MGBILA125S
MGBILA150S
MGBILA200S
MGBILA250S
MGBILA300S
MGBILA350S
MGBILA400S
cULus: E88878
Standards: UL 467 & 486A-486B, CSA C22.2 No. 41-13 & CSA C22.2 No. 65-13