Sub Category: Flex
< Products
Insulated Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Feature(s): Insulated
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
- Assembled with die cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SSQ037I |
| SSQ050I |
| SSQ075I |
| SSQ100I |
| SSQ125I |
| SSQ150I |
| SSQ200I |
| SSQ250I |
| SSQ300I |
| SSQ350I |
| SSQ400I |
| A | B | C |
|---|---|---|
| 1.08 | 0.49 | 0.62 |
| A | B | C |
|---|---|---|
| 1.58 | 0.58 | 0.99 |
| A | B | C |
|---|---|---|
| 1.68 | 0.58 | 1.18 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Assembled with die cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SSQ037 |
| SSQ050 |
| SSQ075 |
| SSQ100 |
| SSQ125 |
| SSQ150 |
| SSQ150U |
| SSQ200 |
| SSQ200U |
| SSQ250 |
| SSQ300 |
| SSQ350 |
| SSQ350U |
| SSQ400 |
| A | B | C |
|---|---|---|
| 1 | 0.41 | 0.62 |
| A | B | C |
|---|---|---|
| 1.5 | 0.5 | 0.99 |
| A | B | C |
|---|---|---|
| 1.59 | 0.5 | 1.18 |
| A | B | C |
|---|---|---|
| 1.75 | 0.55 | 1.44 |
| A | B | C |
|---|---|---|
| 1.9 | 0.61 | 1.76 |
| A | B | C |
|---|---|---|
| 2.03 | 0.61 | 2.06 |
| A | B | C |
|---|---|---|
| 2.1 | 0.61 | 2.55 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Screw-In Coupling
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Coupling
Connection Type(s): Screw-In
Screw-in type couplings are used to join two lengths of FMC where minimum spacing between conduit is desired. For dry location applications.
- Screws into conduit
Trade Size
| Model Number |
|---|
| SICP050 |
| SICP075 |
| SICP100 |
| SICP125 |
| SICP150 |
| SICP200 |
| A | B | C |
|---|---|---|
| 1.79 | 0.92 | 0.2 |
| A | B | C |
|---|---|---|
| 2.11 | 1.13 | 0.22 |
| A | B | C |
|---|---|---|
| 2.42 | 1.36 | 0.31 |
| A | B | C |
|---|---|---|
| 2.76 | 1.75 | 0.31 |
| A | B | C |
|---|---|---|
| 3.07 | 2.11 | 0.31 |
| A | B | C |
|---|---|---|
| 3.28 | 2.67 | 0.31 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Snap Lock®
Snap Lock® screw-in type connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Screws into conduit
Trade Size
| Model Number |
|---|
| SICN037S |
| SICN050S |
| A | B | C |
|---|---|---|
| 1.19 | 0.83 | 0.4 |
| A | B | C |
|---|---|---|
| 1.27 | 0.83 | 0.4 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Insulated
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
- 90° C rated throat insulator
Trade Size
| Model Number |
|---|
| SICN037I |
| SICN050I |
| SICN075I |
| SICN100I |
| SICN125I |
| SICN150I |
| SICN200I |
| A | B | C |
|---|---|---|
| 1.36 | 0.92 | 0.46 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
Trade Size
| Model Number |
|---|
| SICN037 |
| SICN050 |
| SICN075 |
| SICN100 |
| SICN125 |
| SICN150 |
| SICN200 |
| A | B | C |
|---|---|---|
| 1.28 | 0.92 | 0.46 |
| A | B | C |
|---|---|---|
| 1.35 | 0.92 | 0.41 |
| A | B | C |
|---|---|---|
| 1.61 | 1.13 | 0.39 |
| A | B | C |
|---|---|---|
| 1.93 | 1.36 | 0.54 |
| A | B | C |
|---|---|---|
| 2.13 | 1.75 | 0.61 |
| A | B | C |
|---|---|---|
| 2.32 | 2.11 | 0.63 |
| A | B | C |
|---|---|---|
| 2.56 | 2.67 | 0.76 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Strap Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with die-cast zinc locknut and zinc plated steel screw
- Die-cast from high strength zinc alloy
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SC050 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Feature(s): Snap Lock®
Snap Lock® saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SAD037S |
| A | B | C |
|---|---|---|
| 1.65 | 1.04 | 0.93 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SAD037 |
| A | B | C |
|---|---|---|
| 0.9 | 1.61 | 0.9 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Used to terminate non-metallic, armored or metal clad cables to an enclosure or outlet box
- Die-cast from high strength zinc alloy
- Die-cast clamp
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SAD037DC |
| SAD050DC |
| SAD075DC |
| SAD100DC |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Feature(s): Insulated
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- 90° C rated throat insulator
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MSSQ037I |
| MSSQ050I |
| MSSQ075I |
| MSSQ100I |
| MSSQ125I |
| MSSQ150I |
| MSSQ200I |
| MSSQ250I |
| MSSQ300I |
| MSSQ350I |
| MSSQ400I |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MSSQ037 |
| MSSQ050 |
| MSSQ075 |
| MSSQ100 |
| MSSQ125 |
| MSSQ150 |
| MSSQ200 |
| MSSQ250 |
| MSSQ300 |
| MSSQ350 |
| MSSQ400 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90˚ Duplex Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeDuplexSqueeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
< Products
Insulated 90˚ Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Insulated
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- 90° C rated throat insulator
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MASQ037I |
| MASQ050I |
| MASQ075I |
| MASQ100I |
| MASQ125I |
| MASQ150I |
| MASQ200I |
| MASQ250I |
| MASQ300I |
| MASQ350I |
| MASQ400I |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90˚ Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MASQ037 |
| MASQ050 |
| MASQ075 |
| MASQ100 |
| MASQ125 |
| MASQ150 |
| MASQ200 |
| MASQ250 |
| MASQ300 |
| MASQ350 |
| MASQ400 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| FCA050I |
| FCA075I |
| A | B | C |
|---|---|---|
| 0.96 | 1.55 | 0.4 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Combination Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Combination
Combination connectors are used to terminate AC, MC or FMC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| FBMC037 |
| A | B | C |
|---|---|---|
| 0.74 | 1.16 | 0.36 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| FCA050 |
| FCA075 |
| A | B | C |
|---|---|---|
| 0.96 | 1.48 | 0.4 |
| A | B | C |
|---|---|---|
| 1.15 | 1.55 | 0.49 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Duplex Connector – Steel
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
< Products
Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Snap Lock®
Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP1S |
| A | B | C |
|---|---|---|
| 1.64 | 1.45 | 0.41 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP1DSI |
| A | B | C |
|---|---|---|
| 2.1 | 1.49 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure
- With two zinc plated steel screws
- Die-cast from high strength zinc alloy
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP2 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Clamp type
- Single screw
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP1 |
| A | B | C |
|---|---|---|
| 1.6 | 1.49 | 0.42 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Flex Coupling
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTFlex
Type(s): Coupling
Connection Type(s): CompressionScrew-In
Feature(s): Combination
Combination couplings are used to provide a transition from steel EMT conduit to Flexible Metal Conduit. For dry location applications.
- Compression type
Trade Size
| Model Number |
|---|
| CSICP050 |
| CSICP075 |
| CSICP100 |
| A | B | C |
|---|---|---|
| 1.4 | 0.98 | 0.15 |
| A | B | C |
|---|---|---|
| 1.52 | 1.23 | 0.21 |
| A | B | C |
|---|---|---|
| 1.99 | 1.52 | 0.31 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Flex Coupling
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTFlex
Type(s): Coupling
Connection Type(s): Set ScrewSqueeze
Feature(s): Combination
Combination couplings are used to provide a transition from steel EMT conduit to Flexible Metal Conduit. For dry location applications.
- Set screw type EMT connection
- Squeeze type Flex connection
Trade Size
| Model Number |
|---|
| CMB050SS |
| CMB075SS |
| A | B | C |
|---|---|---|
| 0.72 | 0.93 | 1.53 |
| A | B | C |
|---|---|---|
| 0.93 | 1.16 | 1.91 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Cut-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Cut-In
Feature(s): Double Snap Lock®Snap Lock®
Used to terminate armored or metal clad cable to an enclosure or outlet box
- Die-cast from high strength zinc alloy
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| CBXC037DSI |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
One-Hole Flex Strap
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Strap
Connection Type(s): One-Hole
One-hole flex straps are used to provide support for runs of FMC, AC or MC as required by the National Electric Code (NEC).
- Snap-on type
Trade Size
| Model Number |
|---|
| BXS037 |
| A | B | C |
|---|---|---|
| 1.12 | 0.5 | 0.53 |
< Products
Double Snap Lock® AC/MC Connector – Steel
Material: Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXCS037DSI |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Snap Lock®
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXC037S |
| A | B | C |
|---|---|---|
| 0.87 | 0.94 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXC037DSI |
| A | B | C |
|---|---|---|
| 1.45 | 0.76 | 0.39 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXC037 |
| A | B | C |
|---|---|---|
| 0.79 | 0.63 | 0.37 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Double Snap Lock®InsulatedSnap Lock®
Double Snap Lock® 90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
- No tools required
- 90° C rated throat insulator
- Assembled with die-cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| ASQ037DSI |
| ASQ050DSI |
| A | B | C |
|---|---|---|
| 1.37 | 1.73 | 0 |
| A | B | C |
|---|---|---|
| 1.68 | 2.06 | 0 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Insulated
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- 90° C rated throat insulator
- Assembled with die-cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| ASQ037I |
| ASQ050I |
| ASQ075I |
| ASQ100I |
| ASQ125I |
| ASQ150I |
| ASQ200I |
| ASQ250I |
| ASQ300I |
| ASQ350I |
| ASQ400I |
| A | B | C |
|---|---|---|
| 1.18 | 1.3 | 0.46 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.51 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.51 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Assembled with die-cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| ASQ037 |
| ASQ050 |
| ASQ075 |
| ASQ100 |
| ASQ125 |
| ASQ150 |
| ASQ200 |
| ASQ250 |
| ASQ300 |
| ASQ350 |
| ASQ400 |
| A | B | C |
|---|---|---|
| 1.18 | 1.29 | 0.39 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.44 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.43 |
| A | B | C |
|---|---|---|
| 2.13 | 2.3 | 0.53 |
| A | B | C |
|---|---|---|
| 3.01 | 2.7 | 0.59 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Snap-In
Snap-in connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number |
|---|
| AMC050 |
| AMC075 |
| A | B | C |
|---|---|---|
| 1.33 | 0.98 | 1.72 |
| A | B | C |
|---|---|---|
| 1.65 | 1.34 | 2.02 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Snap-In
Duplex snap-in connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number |
|---|
| AMC052 |
| A | B | C |
|---|---|---|
| 1.66 | 1.76 | 0.89 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Feature(s): Insulated
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
- Assembled with die cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69401 | 1 | 30 | Polybag |
| 69407 | 1 | 25 | Polybag |
| 69408 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 1.08 | 0.49 | 0.62 |
| A | B | C |
|---|---|---|
| 1.58 | 0.58 | 0.99 |
| A | B | C |
|---|---|---|
| 1.68 | 0.58 | 1.18 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Assembled with die cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49401 | 1 | 30 | Polybag |
| 55401M | 50 | 1 | Contractor Pack |
| 49407 | 1 | 25 | Polybag |
| 44407 | 3 | 20 | Polybag |
| SC-50 | 25 | 2 | Contractor Pack |
| 49408 | 1 | 25 | Polybag |
| 44408 | 3 | 20 | Polybag |
| 55408M | 25 | 2 | Contractor Pack |
| 02-55410 | 1 | 10 | Boxed - Individual UPC |
| 02-55412 | 1 | 10 | Boxed - Individual UPC |
| 02-55414 | 1 | 10 | Boxed - Individual UPC |
| 02-55416 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1 | 0.41 | 0.62 |
| A | B | C |
|---|---|---|
| 1.5 | 0.5 | 0.99 |
| A | B | C |
|---|---|---|
| 1.59 | 0.5 | 1.18 |
| A | B | C |
|---|---|---|
| 1.75 | 0.55 | 1.44 |
| A | B | C |
|---|---|---|
| 1.9 | 0.61 | 1.76 |
| A | B | C |
|---|---|---|
| 2.03 | 0.61 | 2.06 |
| A | B | C |
|---|---|---|
| 2.1 | 0.61 | 2.55 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Screw-In Coupling
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Coupling
Connection Type(s): Screw-In
Screw-in type couplings are used to join two lengths of FMC where minimum spacing between conduit is desired. For dry location applications.
- Screws into conduit
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 18127 | 1 | 10 | Polybag |
| 49013 | 1 | 20 | Polybag |
| 56013 | 50 | 10 | Bulk - No individual UPC |
| 18128 | 1 | 10 | Polybag |
| 49014 | 1 | 25 | Polybag |
| 44014 | 5 | 20 | Polybag |
| 56014 | 25 | 10 | Bulk - No individual UPC |
| 02-56015 | 1 | 10 | Boxed - Individual UPC |
| 02-56016 | 1 | 10 | Boxed - Individual UPC |
| 02-56017 | 1 | 10 | Boxed - Individual UPC |
| 02-56018 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.79 | 0.92 | 0.2 |
| A | B | C |
|---|---|---|
| 2.11 | 1.13 | 0.22 |
| A | B | C |
|---|---|---|
| 2.42 | 1.36 | 0.31 |
| A | B | C |
|---|---|---|
| 2.76 | 1.75 | 0.31 |
| A | B | C |
|---|---|---|
| 3.07 | 2.11 | 0.31 |
| A | B | C |
|---|---|---|
| 3.28 | 2.67 | 0.31 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Insulated
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
- 90° C rated throat insulator
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69335 | 1 | 50 | Polybag |
| A | B | C |
|---|---|---|
| 1.36 | 0.92 | 0.46 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49009 | 1 | 50 | Polybag |
| 42009 | 2 | 25 | Polybag |
| 18129 | 4 | 10 | Polybag |
| 56009 | 50 | 10 | Bulk - No individual UPC |
| GC-38 | 50 | 2 | Contractor Pack |
| 49010 | 1 | 50 | Polybag |
| 18130 | 4 | 10 | Polybag |
| 44010 | 5 | 20 | Polybag |
| 56010 | 50 | 10 | Bulk - No individual UPC |
| GC-50 | 50 | 2 | Contractor Pack |
| 49011 | 1 | 20 | Polybag |
| 18131 | 2 | 5 | Polybag |
| 56011 | 25 | 10 | Bulk - No individual UPC |
| GC-75 | 25 | 2 | Contractor Pack |
| 02-56012 | 1 | 10 | Boxed - Individual UPC |
| 02-57013 | 1 | 10 | Boxed - Individual UPC |
| 02-57014 | 1 | 10 | Boxed - Individual UPC |
| 02-57015 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.28 | 0.92 | 0.46 |
| A | B | C |
|---|---|---|
| 1.35 | 0.92 | 0.41 |
| A | B | C |
|---|---|---|
| 1.61 | 1.13 | 0.39 |
| A | B | C |
|---|---|---|
| 1.93 | 1.36 | 0.54 |
| A | B | C |
|---|---|---|
| 2.13 | 1.75 | 0.61 |
| A | B | C |
|---|---|---|
| 2.32 | 2.11 | 0.63 |
| A | B | C |
|---|---|---|
| 2.56 | 2.67 | 0.76 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Snap Lock®
Snap Lock® screw-in type connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Screws into conduit
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49170 | 1 | 25 | Polybag |
| 42170 | 2 | 20 | Polybag |
| GC-138 | 25 | 2 | Contractor Pack |
| 49171 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 1.19 | 0.83 | 0.4 |
| A | B | C |
|---|---|---|
| 1.18 | 1.3 | 0.39 |
| A | B | C |
|---|---|---|
| 1.27 | 0.83 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Feature(s): Snap Lock®
Snap Lock® saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49504 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 1.65 | 1.04 | 0.93 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49503 | 1 | 20 | Polybag |
| 44503 | 5 | 10 | Polybag |
| 55503 | 50 | 10 | Bulk - No individual UPC |
| A | B | C |
|---|---|---|
| 0.9 | 1.61 | 0.9 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69090 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 0.96 | 1.55 | 0.4 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49090 | 1 | 12 | Polybag |
| 44090 | 3 | 20 | Polybag |
| 44091 | 3 | 5 | Polybag |
| A | B | C |
|---|---|---|
| 0.96 | 1.48 | 0.4 |
| A | B | C |
|---|---|---|
| 1.15 | 1.55 | 0.49 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Combination Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Combination
Feature(s): Snap Lock®
Combination connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 42028 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 0.77 | 0.91 | 0.39 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Combination Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Combination
Combination connectors are used to terminate AC, MC or FMC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49502 | 1 | 100 | Polybag |
| 44002 | 3 | 20 | Polybag |
| 42002 | 5 | 25 | Polybag |
| C-510 | 100 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 0.74 | 1.16 | 0.36 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Snap Lock®
Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49631 | 1 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.64 | 1.45 | 0.41 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Clamp type
- Single screw
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 18630 | 1 | 5 | Polybag |
| 49630 | 1 | 20 | Polybag |
| A | B | C |
|---|---|---|
| 1.6 | 1.49 | 0.42 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49635 | 1 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 2.1 | 1.49 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Flex Coupling
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTFlex
Type(s): Coupling
Connection Type(s): CompressionScrew-In
Feature(s): Combination
Combination couplings are used to provide a transition from steel EMT conduit to Flexible Metal Conduit. For dry location applications.
- Compression type
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49289 | 1 | 15 | Polybag |
| 55289 | 50 | 10 | Bulk - No individual UPC |
| 49290 | 1 | 10 | Polybag |
| 55290 | 25 | 10 | Bulk - No individual UPC |
| 49291 | 1 | 5 | Polybag |
| 55291 | 25 | 10 | Bulk - No individual UPC |
| A | B | C |
|---|---|---|
| 1.4 | 0.98 | 0.15 |
| A | B | C |
|---|---|---|
| 1.52 | 1.23 | 0.21 |
| A | B | C |
|---|---|---|
| 1.99 | 1.52 | 0.31 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Flex Coupling
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTFlex
Type(s): Coupling
Connection Type(s): Set ScrewSqueeze
Feature(s): Combination
Combination couplings are used to provide a transition from steel EMT conduit to Flexible Metal Conduit. For dry location applications.
- Set screw type EMT connection
- Squeeze type Flex connection
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49280 | 1 | 15 | Polybag |
| 55280 | 25 | 10 | Polybag |
| 49281 | 1 | 10 | Polybag |
| 55281 | 25 | 10 | Polybag |
| A | B | C |
|---|---|---|
| 0.72 | 0.93 | 1.53 |
| A | B | C |
|---|---|---|
| 0.93 | 1.16 | 1.91 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Cut-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Cut-In
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® cut-in connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in an old work (cut-in) dry location box or enclosure. The Double Snap Lock® design provides a faster installation.
- No tools required
- Flush mount inside the box
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 45510 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.54 | 1.11 | 1.1 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
One-Hole Flex Strap
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Strap
Connection Type(s): One-Hole
One-hole flex straps are used to provide support for runs of FMC, AC or MC as required by the National Electric Code (NEC).
- Snap-on type
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 47919 | 3 | 50 | Polybag |
| 44919 | 10 | 20 | Polybag |
| 55919M | 100 | 2 | Contractor Pack |
| 55919 | 100 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 1.12 | 0.5 | 0.53 |
< Products
Double Snap Lock® AC/MC Connector – Steel
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 45065 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.42 | 0.79 | 0.39 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Snap Lock®
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 42502 | 5 | 10 | Polybag |
| 45502 | 2 | 12 | Polybag |
| C-560 | 25 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 0.87 | 0.94 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 42505 | 5 | 10 | Polybag |
| 45505 | 2 | 12 | Polybag |
| C-570 | 25 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 1.45 | 0.76 | 0.39 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49501 | 1 | 100 | Polybag |
| 18058 | 4 | 10 | Polybag |
| 45501 | 10 | 15 | Polybag |
| C-550 | 100 | 5 | Contractor Pack |
| A | B | C |
|---|---|---|
| 0.79 | 0.63 | 0.37 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Insulated
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- 90° C rated throat insulator
- Assembled with die-cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69801 | 1 | 50 | Polybag |
| 69804 | 1 | 20 | Polybag |
| 69806 | 1 | 20 | Polybag |
| A | B | C |
|---|---|---|
| 1.18 | 1.3 | 0.46 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.51 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.51 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Double Snap Lock®InsulatedSnap Lock®
Double Snap Lock® 90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
- No tools required
- 90° C rated throat insulator
- Assembled with die-cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49815 | 2 | 6 | Polybag |
| 49816 | 1 | 12 | Polybag |
| A | B |
|---|---|
| 1.37 | 1.73 |
| A | B |
|---|---|
| 1.68 | 2.06 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Assembled with die-cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49801 | 1 | 50 | Polybag |
| 44801 | 2 | 20 | Polybag |
| 55801M | 50 | 2 | Contractor Pack |
| 49804 | 1 | 20 | Polybag |
| 55804 | 25 | 10 | Bulk - No individual UPC |
| 55804M | 25 | 2 | Contractor Pack |
| 49806 | 1 | 6 | Polybag |
| 55806 | 10 | 10 | Bulk - No individual UPC |
| 02-55807 | 1 | 10 | Boxed - Individual UPC |
| 02-55808 | 1 | 10 | Boxed - Individual UPC |
| 02-55809 | 1 | 4 | Boxed - Individual UPC |
| 02-55810 | 1 | 4 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.18 | 1.29 | 0.39 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.44 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.43 |
| A | B | C |
|---|---|---|
| 2.13 | 2.3 | 0.53 |
| A | B | C |
|---|---|---|
| 3.01 | 2.7 | 0.59 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
< Products
Anti-Short Bushing
Material: Non-Metallic
Category: Fittings
Sub Category: Flex
Type(s): Bushing
Connection Type(s): Anti-Short
Anti-short bushings are inserted into the end of AC or FMC in order to protect the conductors from the sharp edges of the raceway where cut.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 02-55035 | 35 | 20 | Polybag |
| 02-55036 | 35 | 20 | Polybag |
| 02-55037 | 35 | 20 | Polybag |
| 02-55038 | 20 | 10 | Polybag |
| 02-55039 | 16 | 10 | Polybag |
| A | B |
|---|---|
| 0.39 | 0.35 |
| A | B |
|---|---|
| 0.45 | 0.41 |
| A | B |
|---|---|
| 0.59 | 0.54 |
| A | B |
|---|---|
| 0.78 | 0.73 |
| A | B |
|---|---|
| 0.99 | 0.94 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
< Products
Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Snap-In
Snap-in connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 44440 | 3 | 10 | Polybag |
| AMC-50 | 50 | 2 | Contractor Pack |
| 44441 | 2 | 10 | Polybag |
| AMC-75 | 25 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 1.33 | 0.98 | 1.72 |
| A | B | C |
|---|---|---|
| 1.65 | 1.34 | 2.02 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): DuplexSnap-In
Duplex snap-in connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 44450 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.66 | 1.76 | 0.89 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12