MarketsCastingsStampingSourcing SolutionsAbout UsWhy Sigma
Electrical
Electrical

An extensive range of robust fittings and weatherproof products.

Automotive
Automotive

Connectivity solutions such as high brackets, busbars, and connector pins.

Power Transmission & Distribution
Power Transmission & Distribution

Connectors & structural components for cutouts, transformers, & substations.

Aerospace
Aerospace

Complex sensor housings & fracture-critical products.

Appliances
Appliances

Robust castings and assemblies for everyday appliances.

Commercial Hardware
Commercial Hardware

Finished components for commercial & residential hardware applications.

Electronics & Telecom
Electronics & Telecom

Precision metal stamped sensors, connectors and cast housings & covers.

Fluid Power
Fluid Power

Durable, precision products for high-pressure applications.

Food & Beverage
Food & Beverage

Handles, leveling pins, flow valves & button housings.

Lighting
Lighting

Custom housings to fully assembled commercial & industrial light fixtures.

Marine
Marine

Durable corrosion-resistant engineered castings and subassemblies.

Medical & Dental
Medical & Dental

Medical-grade parts for implants, housings, manifolds, and pumps.

Oil & Gas
Oil & Gas

Custom housings and covers for flow control, pressure valves & meters.

Power Tools
Power Tools

Durable yet lightweight custom metal housings.

Solar
Solar

Innovative precision metal stamped parts.

High Pressure Die Casting
High Pressure Die Casting

High-pressure liquid metal is pressed into a precision metal mold cavity, and then cooled & solidified under pressure.

Ideal for a wide range of applications, including automotive, agricultural, electronics, and medical.

Sand Casting
Sand Casting

Castings with complex shapes & inner cavities that are produced in a sand mold

Ideal for parts with complex shapes and inner cavities

Gravity Die Casting
Gravity Die Casting

A mold is filled with liquid metal using gravity and cooled and solidified in the mold to obtain a casting

Ideal for parts with complex shapes made with steel, aluminum or magnesium alloys

Investment Casting
Investment Casting

A process used to obtain a mold without a parting surface; creates parts with high dimensional & geometric accuracy

Ideal for near-net shaped parts with complex shapes and high precision requirements

Partner Services
Partner Services

Custom Tooling, Machining, Surface Finishing, Special Purpose Machine Design & Development

Precision Metal Stamping
Precision Metal Stamping

More than 80 presses convert metal sheets into custom parts

Ideal for parts for electronic connectors and microprocessor chips

Swiss Screw Machining
Swiss Screw Machining

A specialized CNC machine capable of producing extremely small, precise parts

Ideal for complex miniature screws, contact pins & micro-fasteners

Partner Services
Partner Services

Rapid Prototypes, Heat Treating, Automated Assembly

Company History
Company History

Learn more about our company milestones.

Plant Locations
Plant Locations

Learn more about our global manufacturing facilities.

Company News
Company News

See our company announcements and press releases.

Contact Us
Contact Us

Let us know how we can help create a solution for you

Resources
Resources

Download catalogs and key product guides.

Global Code of Conduct
Global Code of Conduct

Download our Code of Conduct and report violations.

Innovation at Sigma
Innovation at Sigma

Purposeful innovation – the continual improvement and innovation of custom-designed and precision-made products and solutions.

Engineered Solutions
Engineered Solutions

Sigma offers solutions for complex product characteristics and technical requirements.

Global Supply Chain Management
Global Supply Chain Management

U.S.-based supply chain management teams support our customers.

Partner Services
Partner Services

Sigma is a vertically integrated single-source solution provider.

Sustainability at Sigma
Sustainability at Sigma

Our commitment to excellence drives us to build a better, more sustainable future in all aspects of our operations.

Safety at Sigma
Safety at Sigma

Safety is more than just a priority at Sigma Engineered Solutions – it’s a core value.

Sub Category: EMT

< Products

Conduit-to-Box Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number
PE050CBG
PE075CBG
PE100CBG
PE125CBG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Set Screw Connector

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • Concrete-tight when taped
  • 1-1/4″ to 3″ double set screw
Trade Size
Model Number
SESN050
SESN075
SESN100
SESN125
SESN150
SESN200
ABC
1.220.410.65
ABC
1.30.410.86
ABC
1.610.431.11
ABC
2.30.651.41
ABC
2.40.691.65
ABC
2.440.712.13
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Insulated Set Screw Connector

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • With 90°C rated insulator
  • Concrete-tight when taped
  • 1-1/4″ to 2″ double set screw
Trade Size
Model Number
SESN050I
SESN075I
SESN100I
SESN125I
SESN150I
SESN200I
ABC
1.220.410.65
ABC
1.30.410.86
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Set Screw Coupling

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Coupling
Connection Type(s): Set Screw

Set screw type couplings are used to join lengths of steel EMT conduit. For dry location applications.

  • Concrete-tight when taped
  • 1-1/4″ to 3″ double set screw
Trade Size
Model Number
SESP050
SESP075
SESP100
SESP125
SESP150
SESP200
ABC
1.570.840.73
ABC
1.571.060.94
ABC
1.861.311.19
ABC
2.951.711.53
ABC
2.951.941.76
ABC
3.232.392.22
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Compression Connector

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression

Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • Concrete-tight
  • 2-1/2” and 3” also listed for Rigid conduit or IMC
Trade Size
Model Number
SECN050
SECN075
SECN100
SECN125
SECN150
SECN200
ABC
1.311.050.5
ABC
1.481.280.52
ABC
1.531.560.64
ABC
1.71.940.68
ABC
1.962.170.72
ABC
2.072.680.72
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Insulated Compression Connector

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Insulated

Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • With 90° C rated insulator
  • Concrete-tight
Trade Size
Model Number
SECN050I
SECN075I
SECN100I
SECN125I
SECN150I
SECN200I
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Compression Coupling

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Coupling
Connection Type(s): Compression

Compression type couplings are used to join lengths of steel EMT conduit. For dry location applications.

  • Concrete-tight
Trade Size
Model Number
SECP050
SECP075
SECP100
SECP125
SECP150
SECP200
ABC
1.640.721.05
ABC
1.80.941.28
ABC
1.881.181.56
ABC
2.091.541.94
ABC
2.41.752.17
ABC
2.332.222.68
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Insulated Set Screw Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • With 90° C rated insulator
  • Concrete-tight when taped
  • 1-1/4″ to 4″ double set screw
Trade Size
Model Number
SCON050I
SCON075I
SCON100I
SCON125I
SCON150I
SCON200I
SCON250I
SCON300I
SCON350I
SCON400I
ABC
1.140.390.72
ABC
1.410.460.93
ABC
1.530.531.17
ABC
2.020.631.52
ABC
2.250.711.75
ABC
2.550.752.2
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Set Screw Coupling

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Coupling
Connection Type(s): Set Screw

Set screw type couplings are used to join lengths of steel EMT conduit. For dry location applications.

  • Concrete-tight when taped
  • Double set screw
  • 2-1/2” to 4” approved for Rigid
Trade Size
Model Number
SCOP050
SCOP075
SCOP100
SCOP125
SCOP150
SCOP200
SCOP250
SCOP300
SCOP350
SCOP400
ABC
1.340.930.72
ABC
1.711.140.93
ABC
1.851.421.17
ABC
2.51.821.52
ABC
2.872.071.75
ABC
3.442.542.21
ABC
4.023.292.9
ABC
4.493.923.53
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Set Screw Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • Concrete-tight when taped
  • 1-1/4″ to 4″ double set screw
  • 2-1/2” to 4” approved for Rigid
Trade Size
Model Number
SCON050
SCON075
SCON100
SCON125
SCON150
SCON200
SCON250
SCON300
SCON350
SCON400
ABC
1.070.390.72
ABC
1.330.460.93
ABC
1.460.531.17
ABC
1.940.631.52
ABC
2.180.711.75
ABC
2.490.752.2
ABC
3.091.042.91
ABC
3.391.063.53
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

EMT-to-EMT Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeSet Screw

Used to make a 90° connection of two runs of steel EMT conduit

  • Removable aluminum cover permits access for wire pulling
  • Cast from high strength zinc alloy
  • Furnished with rubber gasket
Trade Size
Model Number
PE050EEG
PE075EEG
PE100EEG
PE125EEG
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

EMT-to-Box Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeSet Screw

EMT-to-box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw type
  • Removable aluminum cover
Trade Size
Model Number
PE050EB
PE075EB
PE100EB
PE125EB
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

EMT-to-Box Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeSet Screw

Used to make a 90° connection of Steel EMT conduit to a metal box or enclosure

  • Removable aluminum cover permits access for wire pulling
  • Cast from high strength zinc alloy
  • Furnished with rubber gasket
Trade Size
Model Number
PE050EBG
PE075EBG
PE100EBG
PE125EBG
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

EMT-to-EMT Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeSet Screw

EMT-to-EMT pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw type
  • Removable aluminum cover
Trade Size
Model Number
PE050EE
PE075EE
PE100EE
PE125EE
ABC
1.3110.92
ABC
1.371.271.17
ABC
1.951.571.46
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Conduit-to-Conduit Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of IMC, Rigid or steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number
PE050CCG
PE075CCG
PE100CCG
PE125CCG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

EMT-to-Box Offset Compression Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): CompressionOffset

Compression type offset connectors are used to make a slight adjustment in terminating the end of a run of steel EMT conduit to a metal box or enclosure. For dry location applications.

  • Concrete-tight
Trade Size
Model Number
OCC050
OCC075
OCC100
ABC
2.050.980.47
ABC
2.851.230.47
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

EMT-to-Box Offset Set Screw Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): OffsetSet Screw

Set screw type offset connectors are used to make a slight adjustment in terminating the end of a run of steel EMT conduit to a metal box or enclosure. For dry location applications.

  • Concrete-tight when taped
Trade Size
Model Number
OCS050
OCS075
OCS100
ABC
2.090.930.41
ABC
3.021.120.47
ABC
3.151.420.55
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

One-Hole Strap

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: EMTRigid
Type(s): Strap
Connection Type(s): One-Hole

Used to support rigid conduit or IMC to mounting surface

  • Can be used with clamp backs
  • Cast from high strength malleable iron
    and zinc plated
  • Cast from high strength malleable iron and zinc plated
  • Approved for use with EMT and Rigid/IMC
Trade Size
Model Number
MS037
MS050
MS075
MS100
MS125
MS150
MS200
MS250
MS300
MS350
MS400
,cULus: ,E229278
,CSA: ,LR57925
Standards: UL 2239, CSA 22.2 No. 18
< Products

J Clamp

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: AccessoriesEMTRigid
Type(s): J Clamp

Used to attach rigid conduit, IMC, or EMT to steel structures

  • Assembled with square head bolt
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MJ050
MJ075
MJ100
< Products

Set Screw Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type T

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes rubber gasket & stamped cover
Trade Size
Model Number
LTSS050AN
LTSS075AN
LTSS100AN
LTSS125AN
LTSS150AN
LTSS200AN
LTSS250AN
LTSS300AN
LTSS350AN
LTSS400AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
Volume
149
Volume
175
Volume
298
Volume
300
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type T

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes fiber gasket & die-cast cover
Trade Size
Model Number
LTSS050CG
LTSS075CG
LTSS100CG
LTSS125CG
LTSS150CG
LTSS200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type T

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LTSS050
LTSS075
LTSS100
LTSS125
LTSS150
LTSS200
LTSS250
LTSS300
LTSS350
LTSS400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
Volume
149
Volume
175
Volume
298
Volume
300
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type T

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LTC050
LTC075
LTC100
LTC125
LTC150
LTC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type T

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LTC050AN
LTC075AN
LTC100AN
LTC125AN
LTC150AN
LTC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LR

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes rubber gasket & stamped cover
Trade Size
Model Number
LRSS050AN
LRSS075AN
LRSS100AN
LRSS125AN
LRSS150AN
LRSS200AN
LRSS250AN
LRSS300AN
LRSS350AN
LRSS400AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LR

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes fiber gasket & die-cast cover
Trade Size
Model Number
LRSS050CG
LRSS075CG
LRSS100CG
LRSS125CG
LRSS150CG
LRSS200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LR

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LRC050AN
LRC075AN
LRC100AN
LRC125AN
LRC150AN
LRC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LR

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LRSS050
LRSS075
LRSS100
LRSS125
LRSS150
LRSS200
LRSS250
LRSS300
LRSS350
LRSS400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LR

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LRC050
LRC075
LRC100
LRC125
LRC150
LRC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LL

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes rubber gasket & stamped cover
Trade Size
Model Number
LLSS050AN
LLSS075AN
LLSS100AN
LLSS125AN
LLSS150AN
LLSS200AN
LLSS250AN
LLSS300AN
LLSS350AN
LLSS400AN
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LL

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes fiber gasket & die-cast cover
Trade Size
Model Number
LLSS050CG
LLSS075CG
LLSS100CG
LLSS125CG
LLSS150CG
LLSS200CG
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LL

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LLC050AN
LLC075AN
LLC100AN
LLC125AN
LLC150AN
LLC200AN
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LL

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LLSS050
LLSS075
LLSS100
LLSS125
LLSS150
LLSS200
LLSS250
LLSS300
LLSS350
LLSS400
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LL

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LLC050
LLC075
LLC100
LLC125
LLC150
LLC200
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): Set Screw
Feature(s): Type C

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LCSS050
LCSS075
LCSS100
LCSS125
LCSS150
LCSS200
LCSS250
LCSS300
LCSS350
LCSS400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
Volume
159
Volume
188
Volume
307
Volume
309
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): Set Screw
Feature(s): Type C

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes rubber gasket & stamped cover
Trade Size
Model Number
LCSS050AN
LCSS075AN
LCSS100AN
LCSS125AN
LCSS150AN
LCSS200AN
LCSS250AN
LCSS300AN
LCSS350AN
LCSS400AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
Volume
159
Volume
188
Volume
307
Volume
309
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): Set Screw
Feature(s): Type C

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes fiber gasket & die-cast cover
Trade Size
Model Number
LCSS050CG
LCSS075CG
LCSS100CG
LCSS125CG
LCSS150CG
LCSS200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): CombinationSet ScrewThreaded
Feature(s): Type C

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LCC050
LCC075
LCC100
LCC125
LCC150
LCC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): CombinationSet ScrewThreaded
Feature(s): Type C

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LCC050AN
LCC075AN
LCC100AN
LCC125AN
LCC150AN
LCC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LB

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
  • Includes fiber gasket & die-cast cover
Trade Size
Model Number
LBSS050CG
LBSS075CG
LBSS100CG
LBSS125CG
LBSS150CG
LBSS200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LB

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Set screw hubs to accommodate EMT
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LBSS050
LBSS075
LBSS100
LBSS125
LBSS150
LBSS200
LBSS250
LBSS300
LBSS350
LBSS400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
Volume
153
Volume
183.5
Volume
304.9
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Set Screw Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Conduit Body
Connection Type(s): 90 DegreeSet Screw
Feature(s): Type LB

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction. Pre-assembled with a cover and gasket. For dry location applications.

  • Type LB
  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and rubber gasket
Trade Size
Model Number
LBSS050AN
LBSS075AN
LBSS100AN
LBSS125AN
LBSS150AN
LBSS200AN
LBSS250AN
LBSS300AN
LBSS350AN
LBSS400AN
ABCVolume
4.341.312.44.35
ABCVolume
5.091.542.67.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
Volume
153
Volume
183.5
Volume
304.9
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
65!

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

< Products

Combination Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LB

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LBC050
LBC075
LBC0100
LBC0125
LBC150
LBC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LB

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LBC050AN
LBC075AN
LBC100AN
LBC125AN
LBC150AN
LBC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

90˚ EMT Elbow

Material: Galvanized Steel
Category: Fittings
Sub Category: EMT
Type(s): Elbow
Connection Type(s): 90 Degree

90° elbows are used to connect steel EMT conduit together to allow for 90° bends.

Trade Size
Model Number
EEN050
EEN075
EEN100
EEN125
EEN150
EEN200
ABC
0.714.026.25
ABC
0.924.497.06
ABC
1.165.759.25
ABC
1.517.2410.5
ABC
1.748.2712.63
ABC
2.29.4914.25
cULus: E364687
Standards: UL 797, CSA C22.2 No. 83.1-07
< Products

One-Hole Strap

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Strap
Connection Type(s): One-Hole

One-hole straps are used to provide support for steel EMT conduit as required by the National Electric Code (NEC).

  • Snap-on type
Trade Size
Model Number
ES0501
ES0751
ES1001
ES1251
ES1501
ES2001
ABC
1.660.550.74
ABC
1.90.630.91
ABC
2.130.761.13
ABC
2.830.891.46
ABC
3.1211.82
ABC
3.821.062.22
cULus: E229278
Standards: UL 2239, CSA C22.2 No. 18.4-15
< Products

Two-Hole Strap

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Strap
Connection Type(s): Two-Hole

Two-hole straps are used to provide support for steel EMT conduit where higher load bearing supports are needed as required by the National Electric Code (NEC).

  • Snap-on type
Trade Size
Model Number
ES0502
ES0752
ES1002
ES1252
ES1502
ES2002
ABC
2.130.550.75
ABC
2.620.630.95
ABC
2.80.691.11
ABC
3.250.751.43
ABC
4.090.871.67
ABC
4.7612.21
cULus: E229278
Standards: UL 2239, CSA C22.2 No. 18.4-15
< Products

Snap Lock® Compression Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-TightRain-TightSnap Lock®

Snap Lock® compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. The patent-pending Snap Lock® design provides a faster installation allowing the EMT conduit to snap into the fitting without the use of tools. For wet or dry location applications.

  • Conduit snaps into connector
  • Concrete-tight
  • Rain-tight
Trade Size
Model Number
ECON050
ECON075
ABC
1.151.260.39
ABC
1.181.50.39
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Snap Lock® Compression Coupling

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Coupling
Connection Type(s): Compression
Feature(s): Concrete-TightRain-TightSnap Lock®

Snap Lock® compression type couplings are used to join lengths of steel EMT conduit without the use of tools. The patent pending Snap Lock® design provides a faster installation. For wet location applications.

  • Conduit snaps into coupling
  • Concrete-tight
  • Rain-tight
Trade Size
Model Number
ECOP050
ECOP075
ABC
1.351.260.81
ABC
1.431.51.03
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

EMT-to-Flex Coupling

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTFlex
Type(s): Coupling
Connection Type(s): CompressionScrew-In
Feature(s): Combination

Combination couplings are used to provide a transition from steel EMT conduit to Flexible Metal Conduit. For dry location applications.

  • Compression type
Trade Size
Model Number
CSICP050
CSICP075
CSICP100
ABC
1.40.980.15
ABC
1.521.230.21
ABC
1.991.520.31
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LB

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Assembled with slotted / Robertson combination screws
  • Assembled with rubber gasket and stamped cover
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
CLBC050AN
CLBC075AN
CLBC100AN
CLBC125AN
CLBC150AN
CLBC200AN
CSA: LR57925
< Products

EMT-to-Flex Coupling

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTFlex
Type(s): Coupling
Connection Type(s): Set ScrewSqueeze
Feature(s): Combination

Combination couplings are used to provide a transition from steel EMT conduit to Flexible Metal Conduit. For dry location applications.

  • Set screw type EMT connection
  • Squeeze type Flex connection
Trade Size
Model Number
CMB050SS
CMB075SS
ABC
0.720.931.53
ABC
0.931.161.91
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

EMT-to-NM Coupling

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTNMSE
Type(s): Coupling
Connection Type(s): ClampSet Screw
Feature(s): Combination

Combination couplings are used to provide a transition from steel EMT conduit to NM cable. For dry location applications.

  • Set screw type EMT connection
  • Clamp type NM connection
Trade Size
Model Number
CMB037SS
ABC
0.720.931.34
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Ground Clamp for Rigid or EMT Conduit with 360° Swivel Hub

Material: Copper Alloy
Category: Fittings
Sub Category: EMTGroundingRigid
Type(s): Clamp
Connection Type(s): For EMT ConduitFor Rigid Conduitwith Hub
Feature(s): Swivel Hub

Used to connect copper grounding conductor in rigid conduit, IMC, or EMT to steel or copper water pipe, or copper ground rod

  • Integral hub accommodates rigid, IMC or EMT conduit and swivels 360° for easy alignment
  • Cast from high strength, highly conductive copper alloy
  • Swivel hub
  • Zinc plated steel hardware
Trade Size
Model Number
C22JPT
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
Other: NEC Article 250
< Products

Ground Clamp for Rigid or EMT Conduit with 360° Swivel Hub

Material: Copper Alloy
Category: Fittings
Sub Category: EMTGroundingRigid
Type(s): Clamp
Connection Type(s): For EMT ConduitFor Rigid Conduitwith Hub
Feature(s): Swivel Hub

Used to connect copper grounding conductor in rigid conduit, IMC, or EMT to steel or copper water pipe, or copper ground rod

  • Integral hub accommodates rigid, IMC or EMT conduit and swivels 360° for easy alignment
  • Cast from high strength, highly conductive copper alloy
  • Swivel hub
  • Zinc plated steel hardware
Trade Size
Model Number
C4JPT
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
Other: NEC Article 250
< Products

Ground Clamp for Rigid or EMT Conduit with 360° Swivel Hub

Material: Copper Alloy
Category: Fittings
Sub Category: EMTGroundingRigid
Type(s): Clamp
Connection Type(s): For EMT ConduitFor Rigid Conduitwith Hub
Feature(s): Swivel Hub

Used to connect copper grounding conductor in rigid conduit, IMC, or EMT to steel or copper water pipe, or copper ground rod

  • Integral hub accommodates rigid, IMC or EMT conduit and swivels 360° for easy alignment
  • Cast from high strength, highly conductive copper alloy
  • Swivel hub
  • Zinc plated steel hardware
Trade Size
Model Number
C11JPT
UL: E88878
CSA: LR57925
Standards: UL 467, CSA C22.2 No. 41
Other: NEC Article 250
< Products

Conduit Hanger

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: AccessoriesEMTRigid
Type(s): Conduit Hanger

Conduit hangers are used to secure and suspend EMT and Rigid conduits from overhead supports.

  • Carriage bolt and nut attached
Trade Size
Model Number
CH050
CH075
CH100
CH125
CH125A
CH150
CH200
CH250
CH300
ABC
1.950.760.69
ABC
2.210.760.81
ABC
2.530.870.92
ABC
2.730.870.98
ABC
3.320.961.1
ABC
3.320.961.1
ABC
4.060.961.12
ABC
4.831.181.26
ABC
5.311.181.26
cULus: E229278
Standards: UL 2239, CSA C22.2 No. 18.4-15
< Products

Inside Corner Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeInside CornerSet Screw

Inside corner pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit where it is essential to make tight turns within limited available space.

  • Set screw type
  • Concrete-tight when taped
Trade Size
Model Number
CE050
CE075
ABC
1.80.930.72
ABC
21.130.93
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rain-Tight Compression Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Rain-Tight

Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For rain-tight and concrete-tight applications.

  • Concrete-tight
  • Rain-tight
Trade Size
Model Number
CCON050RT
CCON075RT
CCON100RT
ABC
1.311.020.38
ABC
1.341.260.4
ABC
1.481.50.55
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Compression Coupling

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Coupling
Connection Type(s): Compression

Compression type couplings are used to join lengths of steel EMT conduit. For dry location applications.

  • Concrete-tight
  • Approved for use with EMT / Rigid / IMC
Trade Size
Model Number
CCOP050
CCOP075
CCOP100
CCOP125
CCOP150
CCOP200
CCOP250
CCOP300
CCOP350
CCOP400
ABC
1.70.980.72
ABC
1.781.230.94
ABC
1.811.521.19
ABC
2.121.851.53
ABC
2.422.151.76
ABC
2.472.592.22
ABC
3.413.292.9
ABC
3.63.973.55
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rain-Tight Compression Coupling

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Coupling
Connection Type(s): Compression
Feature(s): Rain-Tight

Compression type couplings are used to join lengths of steel EMT conduit. For rain-tight and concrete-tight applications.

  • Concrete-tight
  • Rain-tight
Trade Size
Model Number
CCOP050RT
CCOP075RT
CCOP100RT
ABC
1.751.020.7
ABC
1.811.280.93
ABC
2.071.521.18
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Compression Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Connector
Connection Type(s): Compression

Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • Concrete-tight
  • 2-1/2” and 3” also listed for Rigid conduit or IMC
  • Approved for use with EMT / Rigid / IMC
Trade Size
Model Number
CCON050
CCON075
CCON100
CCON125
CCON150
CCON200
CCON250
CCON300
CCON350
CCON400
ABC
1.190.980.38
ABC
1.291.220.41
ABC
1.481.520.55
ABC
1.71.850.61
ABC
1.862.150.62
ABC
2.132.590.76
ABC
2.623.151.02
ABC
2.73.971.04
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Insulated Compression Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Connector
Connection Type(s): Compression
Feature(s): Insulated

Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • With 90° C rated insulator
  • Concrete-tight
Trade Size
Model Number
CCON050I
CCON075I
CCON100I
CCON125I
CCON150I
CCON200I
CCON250I
CCON300I
CCON350I
CCON400I
ABC
1.190.980.38
ABC
1.291.220.41
ABC
1.481.520.55
ABC
1.71.850.61
ABC
1.862.150.62
ABC
2.132.590.76
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

90° Set Screw Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): 90 DegreeSet Screw

90° set screw type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.

  • Concrete-tight when taped
Trade Size
Model Number
ASCN050
ASCN075
ABC
1.431.190.48
ABC
1.471.420.54
< Products

90° Compression Connector

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): 90 DegreeCompression

90° compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.

  • Concrete-tight
Trade Size
Model Number
ACCN050
ACCN075
ACCN100
ABC
1.350.980.51
ABC
1.471.230.52
ABC
2.171.520.68
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Set Screw Connector

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • Concrete-tight when taped
  • 1-1/4″ to 3″ double set screw
Trade Size
Model Number Retail Pack Master Pack Package Type
49510 1 25 Polybag
46510 5 30 Polybag
02-53516 50 2 Contractor Pack
49511 1 12 Polybag
46511 5 10 Polybag
02-53517 25 2 Contractor Pack
02-54512 1 20 Boxed - Individual UPC
02-54513 1 10 Boxed - Individual UPC
02-54514 1 5 Boxed - Individual UPC
02-54515 1 5 Boxed - Individual UPC
ABC
1.220.410.65
ABC
1.30.410.86
ABC
1.610.431.11
ABC
2.30.651.41
ABC
2.40.691.65
ABC
2.440.712.13
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Insulated Set Screw Connector

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

  • With 90°C rated insulator
  • Concrete-tight when taped
  • 1-1/4″ to 2″ double set screw
Trade Size