Product Type: Connector
< Products
Double Snap Lock® Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Double Snap Lock®InsulatedSnap Lock®
Double Snap Lock® squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
- No tools required
- 90° C rated throat insulator
- Patent-pending design
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69417 | Polybag | ||
| 69418 | Polybag | ||
| 69419 | Polybag |
| A | B | C |
|---|---|---|
| 1.37 | 1.73 | 0 |
| A | B | C |
|---|---|---|
| 1.68 | 2.06 | 0 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Double Snap Lock®InsulatedSnap Lock®
Double Snap Lock® squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
- No tools required
- 90° C rated throat insulator
- Patent-pending design
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SSQ037DSI |
| SSQ050DSI |
| SSQ075DSI |
| A | B | C |
|---|---|---|
| 1.37 | 1.73 | 0 |
| A | B | C |
|---|---|---|
| 1.68 | 2.06 | 0 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Cord Grip Non-metallic Connector (without mesh)
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Plastic fittings
- Rubber grommet provides water-tight seal
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49226M | 1 | 10 | Polybag |
| 49227M | 1 | 10 | Polybag |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
Conduit-to-Box Combination Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
- Set screw for EMT and threaded for Rigid conduit or IMC
- Removable aluminum cover and rubber gasket
Trade Size
| Model Number |
|---|
| PE050CBG |
| PE075CBG |
| PE100CBG |
| PE125CBG |
| A | B | C |
|---|---|---|
| 1.31 | 1 | 0.92 |
| A | B | C |
|---|---|---|
| 1.37 | 1.27 | 1.17 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Water Tight Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Water Tight
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Yellow Plastic fittings with stainless steel single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| W5011M |
| W5012M |
| W5013M |
| W5015M |
| W5017M |
| W7512M |
| W7514M |
| W7516M |
| W7518M |
| W7519M |
| W7520M |
| W10018M |
| W10019M |
| W10021M |
| W10022M |
| W10023M |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Water Tight Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Water Tight
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Yellow Plastic fittings with plastic single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| W7514N |
| W7516N |
| W10019N |
| W10021N |
| W10023N |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Service Entrance Cable Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Service Entrance Cable
Service entrance cable connectors are used for sealing and terminating Oval SE cable to a threaded entry of a watertight box or enclosure.
- Wet location approved when used with a sealing locknut (not included)
- Rubber grommet provides water-tight seal around cable
Trade Size
| Model Number |
|---|
| WC1004 |
| WC1006 |
| WC1008 |
| WC1251 |
| WC1252 |
| WC1253 |
| WC15010 |
| WC15020 |
| WC20010 |
| WC20020 |
| WC20030 |
| WC20040 |
| WC20040L |
| A | B | C |
|---|---|---|
| 1.44 | 0.5 | 0.8 |
| A | B | C |
|---|---|---|
| 1.44 | 0.44 | 0.7 |
| A | B | C |
|---|---|---|
| 1.99 | 0.57 | 0.94 |
| A | B | C |
|---|---|---|
| 2.18 | 0.74 | 1.24 |
| A | B | C |
|---|---|---|
| 2.41 | 0.89 | 1.54 |
| A | B | C |
|---|---|---|
| 2.41 | 1 | 1.58 |
UL: E155410
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Underground Feeder (UF) Cable Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Underground Feeder Cable
UF connectors are used to secure Underground Feeder cable to a metal enclosure or waterproof box with a threaded hub.
- Wet location approved when used with a sealing locknut (not included)
Trade Size
| Model Number |
|---|
| UFC050 |
| UFC075 |
| A | B | C |
|---|---|---|
| 1.26 | 0.22 | 0.44 |
| A | B | C |
|---|---|---|
| 1.3 | 0.22 | 0.66 |
UL: E213494
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Two Way Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
- Two way models accommodate cable in horizontal or vertical orientations
- With tin plating
Trade Size
| Model Number |
|---|
| TGT21ATP |
< Products
Two Way Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
- Two way models accommodate cable in horizontal or vertical orientations
Trade Size
| Model Number |
|---|
| TGT12A |
< Products
Two Way Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
- Two way models accommodate cable in horizontal or vertical orientations
- With tin plating
Trade Size
| Model Number |
|---|
| TGT12ATP |
< Products
Two Way Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
- Two way models accommodate cable in horizontal or vertical orientations
Trade Size
| Model Number |
|---|
| TGT21A |
< Products
Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
- With tin plating
Trade Size
| Model Number |
|---|
| TGO11ATP |
< Products
Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
Trade Size
| Model Number |
|---|
| TGO20A |
< Products
Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
- With tin plating
Trade Size
| Model Number |
|---|
| TGO20ATP |
< Products
Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Assembled with die cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SSQ037 |
| SSQ050 |
| SSQ075 |
| SSQ100 |
| SSQ125 |
| SSQ150 |
| SSQ150U |
| SSQ200 |
| SSQ200U |
| SSQ250 |
| SSQ300 |
| SSQ350 |
| SSQ350U |
| SSQ400 |
| A | B | C |
|---|---|---|
| 1 | 0.41 | 0.62 |
| A | B | C |
|---|---|---|
| 1.5 | 0.5 | 0.99 |
| A | B | C |
|---|---|---|
| 1.59 | 0.5 | 1.18 |
| A | B | C |
|---|---|---|
| 1.75 | 0.55 | 1.44 |
| A | B | C |
|---|---|---|
| 1.9 | 0.61 | 1.76 |
| A | B | C |
|---|---|---|
| 2.03 | 0.61 | 2.06 |
| A | B | C |
|---|---|---|
| 2.1 | 0.61 | 2.55 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Feature(s): Insulated
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
- Assembled with die cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SSQ037I |
| SSQ050I |
| SSQ075I |
| SSQ100I |
| SSQ125I |
| SSQ150I |
| SSQ200I |
| SSQ250I |
| SSQ300I |
| SSQ350I |
| SSQ400I |
| A | B | C |
|---|---|---|
| 1.08 | 0.49 | 0.62 |
| A | B | C |
|---|---|---|
| 1.58 | 0.58 | 0.99 |
| A | B | C |
|---|---|---|
| 1.68 | 0.58 | 1.18 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Tank Ground Connectors
Material: Copper Alloy
Category: Fittings
Sub Category: Grounding
Type(s): Connector
Connection Type(s): Tank Ground
Used for grounding connections on distribution transformer tanks
- Cast from high strength, highly conductive copper alloy
Trade Size
| Model Number |
|---|
| TGO11A |
< Products
Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
Trade Size
| Model Number |
|---|
| SICN037 |
| SICN050 |
| SICN075 |
| SICN100 |
| SICN125 |
| SICN150 |
| SICN200 |
| A | B | C |
|---|---|---|
| 1.28 | 0.92 | 0.46 |
| A | B | C |
|---|---|---|
| 1.35 | 0.92 | 0.41 |
| A | B | C |
|---|---|---|
| 1.61 | 1.13 | 0.39 |
| A | B | C |
|---|---|---|
| 1.93 | 1.36 | 0.54 |
| A | B | C |
|---|---|---|
| 2.13 | 1.75 | 0.61 |
| A | B | C |
|---|---|---|
| 2.32 | 2.11 | 0.63 |
| A | B | C |
|---|---|---|
| 2.56 | 2.67 | 0.76 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Insulated
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
- 90° C rated throat insulator
Trade Size
| Model Number |
|---|
| SICN037I |
| SICN050I |
| SICN075I |
| SICN100I |
| SICN125I |
| SICN150I |
| SICN200I |
| A | B | C |
|---|---|---|
| 1.36 | 0.92 | 0.46 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Snap Lock®
Snap Lock® screw-in type connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Screws into conduit
Trade Size
| Model Number |
|---|
| SICN037S |
| SICN050S |
| A | B | C |
|---|---|---|
| 1.19 | 0.83 | 0.4 |
| A | B | C |
|---|---|---|
| 1.27 | 0.83 | 0.4 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight when taped
- 1-1/4″ to 3″ double set screw
Trade Size
| Model Number |
|---|
| SESN050 |
| SESN075 |
| SESN100 |
| SESN125 |
| SESN150 |
| SESN200 |
| A | B | C |
|---|---|---|
| 1.22 | 0.41 | 0.65 |
| A | B | C |
|---|---|---|
| 1.3 | 0.41 | 0.86 |
| A | B | C |
|---|---|---|
| 1.61 | 0.43 | 1.11 |
| A | B | C |
|---|---|---|
| 2.3 | 0.65 | 1.41 |
| A | B | C |
|---|---|---|
| 2.4 | 0.69 | 1.65 |
| A | B | C |
|---|---|---|
| 2.44 | 0.71 | 2.13 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- With 90°C rated insulator
- Concrete-tight when taped
- 1-1/4″ to 2″ double set screw
Trade Size
| Model Number |
|---|
| SESN050I |
| SESN075I |
| SESN100I |
| SESN125I |
| SESN150I |
| SESN200I |
| A | B | C |
|---|---|---|
| 1.22 | 0.41 | 0.65 |
| A | B | C |
|---|---|---|
| 1.3 | 0.41 | 0.86 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Compression Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight
- 2-1/2” and 3” also listed for Rigid conduit or IMC
Trade Size
| Model Number |
|---|
| SECN050 |
| SECN075 |
| SECN100 |
| SECN125 |
| SECN150 |
| SECN200 |
| A | B | C |
|---|---|---|
| 1.31 | 1.05 | 0.5 |
| A | B | C |
|---|---|---|
| 1.48 | 1.28 | 0.52 |
| A | B | C |
|---|---|---|
| 1.53 | 1.56 | 0.64 |
| A | B | C |
|---|---|---|
| 1.7 | 1.94 | 0.68 |
| A | B | C |
|---|---|---|
| 1.96 | 2.17 | 0.72 |
| A | B | C |
|---|---|---|
| 2.07 | 2.68 | 0.72 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Compression Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Insulated
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- With 90° C rated insulator
- Concrete-tight
Trade Size
| Model Number |
|---|
| SECN050I |
| SECN075I |
| SECN100I |
| SECN125I |
| SECN150I |
| SECN200I |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- With 90° C rated insulator
- Concrete-tight when taped
- 1-1/4″ to 4″ double set screw
Trade Size
| Model Number |
|---|
| SCON050I |
| SCON075I |
| SCON100I |
| SCON125I |
| SCON150I |
| SCON200I |
| SCON250I |
| SCON300I |
| SCON350I |
| SCON400I |
| A | B | C |
|---|---|---|
| 1.14 | 0.39 | 0.72 |
| A | B | C |
|---|---|---|
| 1.41 | 0.46 | 0.93 |
| A | B | C |
|---|---|---|
| 1.53 | 0.53 | 1.17 |
| A | B | C |
|---|---|---|
| 2.02 | 0.63 | 1.52 |
| A | B | C |
|---|---|---|
| 2.25 | 0.71 | 1.75 |
| A | B | C |
|---|---|---|
| 2.55 | 0.75 | 2.2 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
SE Clamp Type Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Clamp Type
Clamp type connectors are used to terminate Oval SE cables to a knockout in a dry location box or enclosure.
Trade Size
| Model Number |
|---|
| SEC125 |
| SEC150 |
| SEC200 |
| A | B | C |
|---|---|---|
| 1.31 | 2.26 | 0.59 |
| A | B | C |
|---|---|---|
| 1.33 | 2.85 | 0.62 |
| A | B | C |
|---|---|---|
| 1.57 | 3.5 | 0.72 |
UL: E155410
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Strap Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with die-cast zinc locknut and zinc plated steel screw
- Die-cast from high strength zinc alloy
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SC050 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight when taped
- 1-1/4″ to 4″ double set screw
- 2-1/2” to 4” approved for Rigid
Trade Size
| Model Number |
|---|
| SCON050 |
| SCON075 |
| SCON100 |
| SCON125 |
| SCON150 |
| SCON200 |
| SCON250 |
| SCON300 |
| SCON350 |
| SCON400 |
| A | B | C |
|---|---|---|
| 1.07 | 0.39 | 0.72 |
| A | B | C |
|---|---|---|
| 1.33 | 0.46 | 0.93 |
| A | B | C |
|---|---|---|
| 1.46 | 0.53 | 1.17 |
| A | B | C |
|---|---|---|
| 1.94 | 0.63 | 1.52 |
| A | B | C |
|---|---|---|
| 2.18 | 0.71 | 1.75 |
| A | B | C |
|---|---|---|
| 2.49 | 0.75 | 2.2 |
| A | B | C |
|---|---|---|
| 3.09 | 1.04 | 2.91 |
| A | B | C |
|---|---|---|
| 3.39 | 1.06 | 3.53 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SAD037 |
| A | B | C |
|---|---|---|
| 0.9 | 1.61 | 0.9 |
cULus: E155411
< Products
Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Used to terminate non-metallic, armored or metal clad cables to an enclosure or outlet box
- Die-cast from high strength zinc alloy
- Die-cast clamp
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SAD037DC |
| SAD050DC |
| SAD075DC |
| SAD100DC |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Feature(s): Snap Lock®
Snap Lock® saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| SAD037S |
| A | B | C |
|---|---|---|
| 1.65 | 1.04 | 0.93 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Clamp Type Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Clamp Type
Clamp type connectors are used to terminate NM Sheathed cable, Flexible Cord, Oval or Round SE cables to a knockout in a dry location box or enclosure.
- Male hub threads NPS
- Assembled with die cast locknut and zinc plated screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| RX037 |
| RX037U |
| RX075 |
| RX100 |
| RX100U |
| RX125 |
| RX150 |
| RX200 |
| A | B | C |
|---|---|---|
| 0.74 | 1.16 | 0.36 |
| A | B | C |
|---|---|---|
| 0.95 | 1.67 | 0.44 |
| A | B | C |
|---|---|---|
| 1.1 | 1.94 | 0.52 |
| A | B | C |
|---|---|---|
| 1.25 | 2.18 | 0.63 |
| A | B | C |
|---|---|---|
| 1.44 | 2.61 | 0.64 |
| A | B | C |
|---|---|---|
| 1.57 | 2.95 | 0.81 |
UL: E213494,E155410
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Clamp Type Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Clamp Type
Feature(s): Snap Lock®
Snap Lock® clamp type connectors are used to terminate NM Sheathed, Flexible Cord, Oval or Round SE cables to a knockout in a dry location box or enclosure. The Snap Lock® design requires no tools when attaching to the box for faster installation.
- Faster installation – no locknut assembly
- Assembled with die cast locknut and zinc plated screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| RX037S |
| RX075S |
| A | B | C |
|---|---|---|
| 0.86 | 1.17 | 0.39 |
| A | B | C |
|---|---|---|
| 1 | 1.67 | 0.47 |
cULus: E213494
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Rigid Set Screw Connectors
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Connector
Connection Type(s): Set Screw
Used to connect threadless rigid conduit or IMC to a steel box or other enclosure
Trade Size
| Model Number |
|---|
| RSCN050 |
| RSCN075 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
NM Cable Connector
Material: Non-Metallic
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): NM Cable
NM cable connectors are used to terminate NM Sheathed cable to a knockout in a dry location box or enclosure.
- Easy snap-in construction
- Wide variety of cable configurations
Trade Size
| Model Number |
|---|
| PNMR037 |
| PNMR075 |
| A | B | C |
|---|---|---|
| 0.66 | 0.98 | 0 |
| A | B | C |
|---|---|---|
| 1.29 | 0.58 | 0 |
cULus: E213494
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Liquid-Tight Connector
Material: Non-Metallic
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
Used to terminate and seal liquid-tight flexible metal and non-metallic type B conduit to a box or enclosure at a 90° angle
- Connectors can be used with tapered female entry or unthreaded knock out using the provided sealing washer and locknut
- Made from high grade plastic
Trade Size
| Model Number |
|---|
| PLTA050B |
| PLTA075B |
| PLTA100B |
cCSAus: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Straight Liquid-Tight Connector
Material: Non-Metallic
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Straight liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or Non-Metallic Type B Conduits to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Non-Metallic Type B Conduit
Trade Size
| Model Number |
|---|
| PLTS037 |
| PLTS050 |
| PLTS075 |
| PLTS100 |
| PLTS125 |
| A | B | C |
|---|---|---|
| 2 | 1.4 | 0.54 |
| A | B | C |
|---|---|---|
| 2.17 | 1.68 | 0.68 |
| A | B | C |
|---|---|---|
| 2.24 | 2 | 0.69 |
cCSAus: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Straight Liquid-Tight Connector
Material: Non-Metallic
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Used to terminate and seal liquid-tight flexible metal and non-metallic type B conduit to a box or enclosure
- Connectors can be used with tapered female entry or unthreaded knock out using the provided sealing washer and locknut
- Made from high grade plastic
Trade Size
| Model Number |
|---|
| PLTS050B |
| PLTS075B |
| PLTS100B |
| PLTS125B |
cCSAus: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Liquid-Tight Connector
Material: Non-Metallic
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Non-Metallic Type B Conduit
Trade Size
| Model Number |
|---|
| PLTA037 |
| PLTA050 |
| PLTA075 |
| PLTA100 |
| A | B | C |
|---|---|---|
| 1.35 | 1.06 | 0.54 |
| A | B | C |
|---|---|---|
| 1.63 | 1.32 | 0.63 |
| A | B | C |
|---|---|---|
| 1.87 | 1.6 | 0.69 |
cCSAus: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Rigid-to-Box Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded
Used to make a 90° connection of Threaded Rigid conduit or IMC to a metal box or enclosure
- Removable aluminum cover permits access for wire pulling
- Cast from high strength zinc alloy
Trade Size
| Model Number |
|---|
| PE050RB |
| PE075RB |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Rigid-to-Box Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded
Rigid-to-box pull elbows are used to connect threaded Rigid conduit or IMC to a box where a 90° bend is required. They facilitate pulling conductors through the bend and the removable cover gives ample access so that wire pulling can be achieved without any obstructions.
- Assembled with removable cover and gasket
- Stamped aluminum cover
- Rubber gasket
Trade Size
| Model Number |
|---|
| PE050RBG |
| PE075RBG |
| PE100RBG |
| PE125RBG |
| A | B | C |
|---|---|---|
| 1.31 | 1 | 0.92 |
| A | B | C |
|---|---|---|
| 1.37 | 1.27 | 1.17 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Box Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeSet Screw
EMT-to-box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
- Set screw type
- Removable aluminum cover
Trade Size
| Model Number |
|---|
| PE050EB |
| PE075EB |
| PE100EB |
| PE125EB |
| A | B | C |
|---|---|---|
| 1.31 | 1 | 0.92 |
| A | B | C |
|---|---|---|
| 1.37 | 1.27 | 1.17 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Box Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeSet Screw
Used to make a 90° connection of Steel EMT conduit to a metal box or enclosure
- Removable aluminum cover permits access for wire pulling
- Cast from high strength zinc alloy
- Furnished with rubber gasket
Trade Size
| Model Number |
|---|
| PE050EBG |
| PE075EBG |
| PE100EBG |
| PE125EBG |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Box Offset Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): CompressionOffset
Compression type offset connectors are used to make a slight adjustment in terminating the end of a run of steel EMT conduit to a metal box or enclosure. For dry location applications.
- Concrete-tight
Trade Size
| Model Number |
|---|
| OCC050 |
| OCC075 |
| OCC100 |
| A | B | C |
|---|---|---|
| 2.05 | 0.98 | 0.47 |
| A | B | C |
|---|---|---|
| 2.85 | 1.23 | 0.47 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Box Offset Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): OffsetSet Screw
Set screw type offset connectors are used to make a slight adjustment in terminating the end of a run of steel EMT conduit to a metal box or enclosure. For dry location applications.
- Concrete-tight when taped
Trade Size
| Model Number |
|---|
| OCS050 |
| OCS075 |
| OCS100 |
| A | B | C |
|---|---|---|
| 2.09 | 0.93 | 0.41 |
| A | B | C |
|---|---|---|
| 3.02 | 1.12 | 0.47 |
| A | B | C |
|---|---|---|
| 3.15 | 1.42 | 0.55 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Feature(s): Insulated
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- 90° C rated throat insulator
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MSSQ037I |
| MSSQ050I |
| MSSQ075I |
| MSSQ100I |
| MSSQ125I |
| MSSQ150I |
| MSSQ200I |
| MSSQ250I |
| MSSQ300I |
| MSSQ350I |
| MSSQ400I |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
45° Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 45 Degree
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With aluminum grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTY037L |
| MNTY050L |
| MNTY075L |
| MNTY100L |
| MLTY125L |
| MLTY150L |
| MLTY200L |
| MLTY250L |
| MLTY300L |
| MLTY350L |
| MLTY400L |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MSSQ037 |
| MSSQ050 |
| MSSQ075 |
| MSSQ100 |
| MSSQ125 |
| MSSQ150 |
| MSSQ200 |
| MSSQ250 |
| MSSQ300 |
| MSSQ350 |
| MSSQ400 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
45° Insulated Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 45 Degree
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With 105° C rated throat insulator
- Includes steel nut
Trade Size
| Model Number |
|---|
| MNTY037I |
| MNTY050I |
| MNTY075I |
| MNTY100I |
| MLTY125I |
| MLTY150I |
| MLTY200I |
| MLTY250I |
| MLTY300I |
| MLTY350I |
| MLTY400I |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
< Products
45° Insulated Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 45 Degree
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With copper grounding lug
- With steel nutWith 105° C rated throat insulator
- With 105° C rated throat insulator,
Trade Size
| Model Number |
|---|
| MNTY037IC |
| MNTY050IC |
| MNTY075IC |
| MNTY100IC |
| MLTY125IC |
| MLTY150IC |
| MLTY200IC |
| MLTY250IC |
| MLTY300IC |
| MLTY350IC |
| MLTY400IC |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
45° Insulated Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 45 Degree
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With aluminum grounding lug
- With steel nutWith 105° C rated throat insulator
- With 105° C rated throat insulator,
Trade Size
| Model Number |
|---|
| MNTY037IL |
| MNTY050IL |
| MNTY075IL |
| MNTY100IL |
| MLTY125IL |
| MLTY150IL |
| MLTY200IL |
| MLTY250IL |
| MLTY300IL |
| MLTY350IL |
| MLTY400IL |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
Straight Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With aluminum grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTS037L |
| MNTS050L |
| MNTS075L |
| MNTS100L |
| MLTS125L |
| MLTS150L |
| MLTS200L |
| MLTS250L |
| MLTS300L |
| MLTS350L |
| MLTS400L |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
45° Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 45 Degree
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- Includes steel nut
Trade Size
| Model Number |
|---|
| MNTY037 |
| MNTY050 |
| MNTY075 |
| MNTY100 |
| MLTY125 |
| MLTY150 |
| MLTY200 |
| MLTY250 |
| MLTY300 |
| MLTY350 |
| MLTY400 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
< Products
45° Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 45 Degree
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With copper grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTY037C |
| MNTY050C |
| MNTY075C |
| MNTY100C |
| MLTY125C |
| MLTY150C |
| MLTY200C |
| MLTY250C |
| MLTY300C |
| MLTY350C |
| MLTY400C |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
Straight Insulated Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With 105° C rated throat insulator
- Includes steel nut
Trade Size
| Model Number |
|---|
| MNTS037I |
| MNTS050I |
| MNTS075I |
| MNTS100I |
| MLTS125I |
| MLTS150I |
| MLTS200I |
| MLTS250I |
| MLTS300I |
| MLTS350I |
| MLTS400I |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
< Products
Insulated Straight Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With 105° C rated throat insulator
- With copper grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTS037IC |
| MNTS050IC |
| MNTS075IC |
| MNTS100IC |
| MLTS125IC |
| MLTS150IC |
| MLTS200IC |
| MLTS250IC |
| MLTS300IC |
| MLTS350IC |
| MLTS400IC |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
Insulated Straight Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With 105° C rated throat insulator
- With aluminum grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTS037IL |
| MNTS050IL |
| MNTS075IL |
| MNTS100IL |
| MLTS125IL |
| MLTS150IL |
| MLTS200IL |
| MLTS250IL |
| MLTS300IL |
| MLTS350IL |
| MLTS400IL |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
90° Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With aluminum grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTA037L |
| MNTA050L |
| MNTA075L |
| MNTA100L |
| MLTA125L |
| MLTA150L |
| MLTA200L |
| MLTA250L |
| MLTA300L |
| MLTA350L |
| MLTA400L |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
Straight Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Straight liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or Non-Metallic Type B Conduits to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.,Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Furnished with sealing ring,Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits,Cast from high strength ductile iron and zinc plated
- ,Furnished with Sealing Ring
Trade Size
| Model Number |
|---|
| MNTS037 |
| MNTS050 |
| MNTS075 |
| MNTS100 |
| MLTS125 |
| MLTS150 |
| MLTS200 |
| MLTS250 |
| MLTS300 |
| MLTS350 |
| MLTS400 |
| A | B | C |
|---|---|---|
| 1.69 | 1.14 | 0.53 |
| A | B | C |
|---|---|---|
| 1.78 | 1.38 | 0.53 |
| A | B | C |
|---|---|---|
| 1.95 | 1.61 | 0.66 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
< Products
Straight Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With copper grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTS037C |
| MNTS050C |
| MNTS075C |
| MNTS100C |
| MLTS125C |
| MLTS150C |
| MLTS200C |
| MLTS250C |
| MLTS300C |
| MLTS350C |
| MLTS400C |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
90° Insulated Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With 105° C rated throat insulator
- Includes steel nut
Trade Size
| Model Number |
|---|
| MNTA037I |
| MNTA050I |
| MNTA075I |
| MNTA100I |
| MLTA125I |
| MLTA150I |
| MLTA200I |
| MLTA250I |
| MLTA300I |
| MLTA350I |
| MLTA400I |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
< Products
90° Insulated Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With copper grounding lug
- With steel nutWith 105° C rated throat insulator
- With 105° C rated throat insulator
Trade Size
| Model Number |
|---|
| MNTA037IC |
| MNTA050IC |
| MNTA075IC |
| MNTA100IC |
| MLTA125IC |
| MLTA150IC |
| MLTA200IC |
| MLTA250IC |
| MLTA300IC |
| MLTA350IC |
| MLTA400IC |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
90° Insulated Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
Feature(s): Insulated
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With aluminum grounding lug
- With steel nutWith 105° C rated throat insulator
- With 105° C rated throat insulator
Trade Size
| Model Number |
|---|
| MNTA037IL |
| MNTA050IL |
| MNTA075IL |
| MNTA100IL |
| MLTA125IL |
| MLTA150IL |
| MLTA200IL |
| MLTA250IL |
| MLTA300IL |
| MLTA350IL |
| MLTA400IL |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
90° Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.,Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Furnished with sealing ring,Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits,Cast from high strength ductile iron and zinc plated
- ,Furnished with Sealing Ring
Trade Size
| Model Number |
|---|
| MNTA037 |
| MNTA050 |
| MNTA075 |
| MNTA100 |
| MLTA125 |
| MLTA150 |
| MLTA200 |
| MLTA250 |
| MLTA300 |
| MLTA350 |
| MLTA400 |
| A | B | C |
|---|---|---|
| 1.25 | 1.13 | 0.53 |
| A | B | C |
|---|---|---|
| 1.58 | 1.31 | 0.53 |
| A | B | C |
|---|---|---|
| 1.84 | 1.64 | 0.66 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
NEMA: NEMA FB-1
Other: NEC Article 351
< Products
90° Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
- Connectors can be used with tapered thread female entry or unthreaded knock-out using the provided sealing washer and locknut
- Cast from high strength ductile iron and zinc plated
- Furnished with Sealing Ring
- With copper grounding lug
- With steel nut
Trade Size
| Model Number |
|---|
| MNTA037C |
| MNTA050C |
| MNTA075C |
| MNTA100C |
| MLTA125C |
| MLTA150C |
| MLTA200C |
| MLTA250C |
| MLTA300C |
| MLTA350C |
| MLTA400C |
cULus: E88878
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
Standards: UL 514B, CSA C22.2 No. 18
Other: NEC Article 351
< Products
90˚ Duplex Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeDuplexSqueeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MDA037 |
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated 90˚ Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Insulated
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- 90° C rated throat insulator
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MASQ037I |
| MASQ050I |
| MASQ075I |
| MASQ100I |
| MASQ125I |
| MASQ150I |
| MASQ200I |
| MASQ250I |
| MASQ300I |
| MASQ350I |
| MASQ400I |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90˚ Squeeze Connector
Material: Malleable Iron
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
- Assembled with steel locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| MASQ037 |
| MASQ050 |
| MASQ075 |
| MASQ100 |
| MASQ125 |
| MASQ150 |
| MASQ200 |
| MASQ250 |
| MASQ300 |
| MASQ350 |
| MASQ400 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Straight Liquid-Tight Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Straight liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or Non-Metallic Type B Conduits to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits
- Locknut not included
Trade Size
| Model Number |
|---|
| LTS037 |
| LTS050 |
| LTS075 |
| LTS075U |
| LTS100 |
| LTS125 |
| LTS150 |
| LTS200 |
| LTS250 |
| LTS300 |
| LTS350 |
| LTS400 |
| A | B | C |
|---|---|---|
| 1.37 | 1.22 | 0.51 |
| A | B | C |
|---|---|---|
| 1.45 | 1.43 | 0.51 |
| A | B | C |
|---|---|---|
| 1.78 | 1.75 | 0.68 |
| A | B | C |
|---|---|---|
| 1.98 | 2.23 | 0.68 |
| A | B | C |
|---|---|---|
| 1.97 | 2.48 | 0.66 |
| A | B | C |
|---|---|---|
| 1.95 | 2.98 | 0.66 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Straight Insulated Liquid-Tight Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Feature(s): Insulated
Used to terminate and seal liquid-tight flexible metal and non-metallic type B conduit to a box or enclosure
- Connectors can be used with tapered female entry or unthreaded knock out using the provided sealing washer and locknut,Connectors can be used with tapered female entry or unthreaded knock out using the provided sealing washer
- Cast from high strength zinc alloy
- With 90° C rated throat insulators
- Locknut not included
Trade Size
| Model Number |
|---|
| LTS037I |
| LTS050I |
| LTS075I |
| LTS100I |
| LTS100IU |
| LTS125I |
| LTS125IU |
| LTS150I |
| LTS200I |
| LTS250I |
| LTS300I |
| LTS350I |
| LTS400I |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Liquid-Tight Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits
- Locknut not included
Trade Size
| Model Number |
|---|
| LTA037 |
| LTA050 |
| LTA075 |
| LTA075U |
| LTA100 |
| LTA125 |
| LTA150 |
| LTA200 |
| LTA250 |
| LTA300 |
| LTA350 |
| LTA400 |
| A | B | C |
|---|---|---|
| 1.46 | 1.12 | 0.48 |
| A | B | C |
|---|---|---|
| 1.6 | 1.37 | 0.56 |
| A | B | C |
|---|---|---|
| 2.37 | 1.66 | 0.72 |
| A | B | C |
|---|---|---|
| 2.31 | 2.13 | 0.67 |
| A | B | C |
|---|---|---|
| 2.5 | 2.42 | 0.67 |
| A | B | C |
|---|---|---|
| 2.8 | 2.94 | 0.67 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Insulated Liquid-Tight Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
Feature(s): Insulated
Used to terminate and seal liquid-tight flexible metal and non-metallic type B conduit to a box or enclosure at a 90° angle
- Connectors can be used with tapered female entry or unthreaded knock out using the provided sealing washer and locknut
- With 90° C rated throat insulator
- Cast from high strength zinc alloy
Trade Size
| Model Number |
|---|
| LTA037I |
| LTA050I |
| LTA075I |
| LTA100I |
| LTA125I |
| LTA150I |
| LTA200I |
| LTA250I |
| LTA300I |
| LTA350I |
| LTA400I |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Combination Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Combination
Combination connectors are used to terminate AC, MC or FMC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| FBMC037 |
| A | B | C |
|---|---|---|
| 0.74 | 1.16 | 0.36 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| FCA050 |
| FCA075 |
| A | B | C |
|---|---|---|
| 0.96 | 1.48 | 0.4 |
| A | B | C |
|---|---|---|
| 1.15 | 1.55 | 0.49 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| FCA050I |
| FCA075I |
| A | B | C |
|---|---|---|
| 0.96 | 1.55 | 0.4 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-TightRain-TightSnap Lock®
Snap Lock® compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. The patent-pending Snap Lock® design provides a faster installation allowing the EMT conduit to snap into the fitting without the use of tools. For wet or dry location applications.
- Conduit snaps into connector
- Concrete-tight
- Rain-tight
Trade Size
| Model Number |
|---|
| ECON050 |
| ECON075 |
| A | B | C |
|---|---|---|
| 1.15 | 1.26 | 0.39 |
| A | B | C |
|---|---|---|
| 1.18 | 1.5 | 0.39 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP1DSI |
| A | B | C |
|---|---|---|
| 2.1 | 1.49 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Snap Lock®
Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP1S |
| A | B | C |
|---|---|---|
| 1.64 | 1.45 | 0.41 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Duplex Connector – Steel
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUPS1DSI |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Strain Relief Box Connector
Material: Zinc Die-Cast
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Zinc die-cast fittings with galvanized steel single weave mesh
- Rubber grommet provides water-tight seal
- Insulated
Trade Size
| Model Number |
|---|
| DC05022I |
| DC05030I |
| DC05040I |
| DC07552I |
| DC10070I |
| DC12594I |
| DC150120I |
| DC200140I |
| A | B | C |
|---|---|---|
| 7.87 | 1.78 | 1.12 |
| A | B | C |
|---|---|---|
| 9.25 | 1.93 | 1.36 |
UL: E121487
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Clamp type
- Single screw
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP1 |
| A | B | C |
|---|---|---|
| 1.6 | 1.49 | 0.42 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure
- With two zinc plated steel screws
- Die-cast from high strength zinc alloy
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| DUP2 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
UF Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): StraightUnderground Feeder Cable
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with UF cords
- Plastic fittings
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNS501UF |
| CNS502UF |
| CNS751UF |
| CNS752UF |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
Cord Grip Non-metallic Connector (without mesh)
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Plastic fittings
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNS509B |
| CNS5011B |
| CNS5012B |
| CNS5013B |
| CNS5015B |
| CNS757B |
| CNS7510B |
| CNS7512B |
| CNS7514B |
| CNS7516B |
| CNS7518B |
| CNS7519B |
| CNS10019B |
| CNS10020B |
| CNS10021B |
| CNS10022B |
| CNS10023B |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
Cord Grip Non-metallic Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Plastic fittings with stainless steel single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNS507M |
| CNS509M |
| CNS5011M |
| CNS5012M |
| CNS5013M |
| CNS5015M |
| CNS5017M |
| CNS757M |
| CNS7510M |
| CNS7512M |
| CNS7514M |
| CNS7516M |
| CNS7518M |
| CNS7519M |
| CNS7520M |
| CNS10014M |
| CNS10016M |
| CNS10018M |
| CNS10019M |
| CNS10020M |
| CNS10021M |
| CNS10022M |
| CNS10023M |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
Cord Grip Non-metallic Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Plastic fittings with plastic single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNS507N |
| CNS509N |
| CNS5011N |
| CNS5012N |
| CNS5013N |
| CNS757N |
| CNS7510N |
| CNS7512N |
| CNS7514N |
| CNS7516N |
| CNS7518N |
| CNS7519N |
| CNS10014N |
| CNS10016N |
| CNS10018N |
| CNS10019N |
| CNS10020N |
| CNS10021N |
| CNS10022N |
| CNS10023N |
| A | B | C |
|---|---|---|
| 8.27 | 2.3 | 1.3 |
| A | B | C |
|---|---|---|
| 8.5 | 2.59 | 1.55 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
90° Cord Grip Non-metallic Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): 90 DegreeCord Grip
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- 90° Angular
- Plastic fittings with plastic single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNA507N |
| CNA509N |
| CNA5011N |
| CNA5012N |
| CNA5013N |
| CNA7510N |
| CNA7512N |
| CNA7514N |
| CNA7516N |
| CNA7518N |
| CNA7519N |
| CNA10014N |
| CNA10016N |
| CNA10019N |
| CNA10020N |
| CNA10021N |
| CNA10023N |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
Cord Grip Non-metallic Connector (without mesh)
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT,
SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords - Plastic fittings
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNS254 |
| CNS256 |
| CNS258 |
| CNS375 |
| CNS377 |
| CNS379 |
| CNS3711 |
| CNS3712 |
| CNS503 |
| CNS505 |
| CNS507 |
| CNS509 |
| CNS5011 |
| CNS5012 |
| CNS5013 |
| CNS5015 |
| CNS5017 |
| CNS757 |
| CNS7510 |
| CNS7512 |
| CNS7514 |
| CNS7516 |
| CNS7518 |
| CNS7519 |
| CNS7520 |
| CNS10014 |
| CNS10016 |
| CNS10018 |
| CNS10019 |
| CNS10020 |
| CNS10021 |
| CNS10022 |
| CNS10023 |
| CNS10024 |
| CNS12521 |
| CNS12523 |
| CNS12524 |
| CNS12525 |
| CNS12526 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
90° Cord Grip Non-metallic Connector (without mesh)
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): 90 DegreeCord Grip
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT,
SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords - 90° Angular
- Plastic fittings
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNA375 |
| CNA377 |
| CNA379 |
| CNA3711 |
| CNA3712 |
| CNA503 |
| CNA505 |
| CNA507 |
| CNA509 |
| CNA5011 |
| CNA5012 |
| CNA5013 |
| CNA5015 |
| CNA5017 |
| CNA757 |
| CNA7510 |
| CNA7512 |
| CNA7514 |
| CNA7516 |
| CNA7518 |
| CNA7519 |
| CNA7520 |
| CNA10014 |
| CNA10016 |
| CNA10018 |
| CNA10019 |
| CNA10020 |
| CNA10021 |
| CNA10022 |
| CNA10023 |
| CNA10024 |
| CNA12521 |
| CNA12523 |
| CNA12524 |
| CNA12525 |
| CNA12526 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
90° Cord Grip Non-metallic Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): 90 DegreeCord Grip
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- 90° Angular
- Plastic fittings with stainless steel single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CNA507M |
| CNA509M |
| CNA5011M |
| CNA5012M |
| CNA5013M |
| CNA5015M |
| CNA5017M |
| CNA7510M |
| CNA7512M |
| CNA7514M |
| CNA7516M |
| CNA7518M |
| CNA7519M |
| CNA7520M |
| CNA10018M |
| CNA10019M |
| CNA10020M |
| CNA10021M |
| CNA10023M |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
45° Cord Grip Al Connector
Material: Aluminum Die-Cast
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): 45 DegreeCord Grip
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- 45° Angular
- Aluminum fittings with stainless steel single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CGY5025M |
| CGY501M |
| CGY502M |
| CGY503M |
| CGY504M |
| CGY7525M |
| CGY751M |
| CGY752M |
| CGY753M |
| CGY754M |
| CGY755M |
| CGY1002M |
| CGY1004M |
| CGY1005M |
| CGY1006M |
| CGY1007M |
| CGY1256M |
| CGY1257M |
| CGY1258M |
| CGY1259M |
| CGY12510M |
| CGY1506M |
| CGY1507M |
| CGY1508M |
| CGY1509M |
| CGY15010M |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Cord Grip Connector
Material: Zinc Die-Cast
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Strain relief cord grip connectors are used to connect S, SO, ST, SJ, SJO and SJT cord to an outlet box or metal enclosure.
- Water-tight when used in conjunction with a sealing locknut (not included)
Trade Size
| Model Number |
|---|
| CGC0501 |
| CGC0502 |
| CGC0503 |
| CGC0751 |
| CGC0752 |
| CGC0753 |
| A | B | C |
|---|---|---|
| 1.19 | 0.5 | 0.39 |
| A | B | C |
|---|---|---|
| 1.29 | 0.78 | 0.41 |
UL: E121487
CSA: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Cord Grip Straight Connector
Material: Aluminum Die-Cast
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Aluminum fittings with stainless steel single/double weave mesh
- Rubber grommet provides water-tight seal
- Straight female connector
Trade Size
| Model Number |
|---|
| CGS3725FM |
| CGS3726FM |
| CGS3727FM |
| CGS3728FM |
| CGS5025FM |
| CGS501FM |
| CGS502FM |
| CGS504FM |
| CGS751FM |
| CGS752FM |
| CGS754FM |
| CGS755FM |
| CGS1002FM |
| CGS1004FM |
| CGS1256FM |
| CGS1257FM |
| CGS1258FM |
| CGS1506FM |
| CGS1507FM |
| CGS1508FM |
| CGS1509FM |
| CGS15010FM |
| CGS20010FM |
| CGS20012FM |
| CGS20013FM |
| CGS20014FM |
| CGS20015FM |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Cord Grip Straight Connector
Material: Aluminum Die-Cast
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): Cord GripStraight
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- Aluminum fittings with stainless steel single/double weave mesh
- Rubber grommet provides water-tight seal
- Straight male connector
Trade Size
| Model Number |
|---|
| CGS3725M |
| CGS3726M |
| CGS3727M |
| CGS3728M |
| CGS5025M |
| CGS501M |
| CGS502M |
| CGS504M |
| CGS505M |
| CGS506M |
| CGS7525M |
| CGS751M |
| CGS752M |
| CGS754M |
| CGS755M |
| CGS756M |
| CGS1002M |
| CGS1004M |
| CGS1005M |
| CGS1006M |
| CGS1007M |
| CGS1256M |
| CGS1257M |
| CGS1258M |
| CGS1259M |
| CGS12510M |
| CGS1506M |
| CGS1507M |
| CGS1508M |
| CGS1509M |
| CGS15010M |
| CGS15011M |
| CGS20010M |
| CGS20011M |
| CGS20012M |
| CGS20013M |
| CGS20014M |
| CGS20015M |
| CGS20016M |
| CGS20017M |
| CGS20018M |
| CGS20019M |
| CGS20020M |
| CGS25014M |
| CGS25016M |
| CGS25017M |
| CGS25018M |
| CGS25019M |
| CGS25020M |
| CGS30014M |
| CGS30016M |
| CGS30017M |
| CGS30018M |
| CGS30019M |
| CGS30020M |
| CGS30021M |
| CGS30022M |
| CGS30023M |
| CGS30024M |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Cord Grip Al Connector
Material: Aluminum Die-Cast
Category: FittingsStrain Relief
Sub Category: Strain Relief
Type(s): Connector
Connection Type(s): 90 DegreeCord Grip
Feature(s): with Mesh
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
- Suitable for use with S, SO, ST, STO, SJ, SJT, SJTO, SJOOW, SOOW, STOOW, SJTOOW and SVO cords
- 90° Angular
- Aluminum fittings with stainless steel single/double weave mesh
- Rubber grommet provides water-tight seal
Trade Size
| Model Number |
|---|
| CGA5025M |
| CGA501M |
| CGA502M |
| CGA504M |
| CGA751M |
| CGA752M |
| CGA754M |
| CGA755M |
| CGA1002M |
| CGA1004M |
| CGA1005M |
| CGA1006M |
| CGA1007M |
| CGA1256M |
| CGA1257M |
| CGA1258M |
| CGA1259M |
| CGA12510M |
| CGA1506M |
| CGA1507M |
| CGA1508M |
| CGA1509M |
| CGA15010M |
| CGA20010M |
| CGA20011M |
| CGA20012M |
| CGA20013M |
| CGA20014M |
| CGA20015M |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Rain-Tight Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Rain-Tight
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For rain-tight and concrete-tight applications.
- Concrete-tight
- Rain-tight
Trade Size
| Model Number |
|---|
| CCON050RT |
| CCON075RT |
| CCON100RT |
| A | B | C |
|---|---|---|
| 1.31 | 1.02 | 0.38 |
| A | B | C |
|---|---|---|
| 1.34 | 1.26 | 0.4 |
| A | B | C |
|---|---|---|
| 1.48 | 1.5 | 0.55 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Connector
Connection Type(s): Compression
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight
- 2-1/2” and 3” also listed for Rigid conduit or IMC
- Approved for use with EMT / Rigid / IMC
Trade Size
| Model Number |
|---|
| CCON050 |
| CCON075 |
| CCON100 |
| CCON125 |
| CCON150 |
| CCON200 |
| CCON250 |
| CCON300 |
| CCON350 |
| CCON400 |
| A | B | C |
|---|---|---|
| 1.19 | 0.98 | 0.38 |
| A | B | C |
|---|---|---|
| 1.29 | 1.22 | 0.41 |
| A | B | C |
|---|---|---|
| 1.48 | 1.52 | 0.55 |
| A | B | C |
|---|---|---|
| 1.7 | 1.85 | 0.61 |
| A | B | C |
|---|---|---|
| 1.86 | 2.15 | 0.62 |
| A | B | C |
|---|---|---|
| 2.13 | 2.59 | 0.76 |
| A | B | C |
|---|---|---|
| 2.62 | 3.15 | 1.02 |
| A | B | C |
|---|---|---|
| 2.7 | 3.97 | 1.04 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Connector
Connection Type(s): Compression
Feature(s): Insulated
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- With 90° C rated insulator
- Concrete-tight
Trade Size
| Model Number |
|---|
| CCON050I |
| CCON075I |
| CCON100I |
| CCON125I |
| CCON150I |
| CCON200I |
| CCON250I |
| CCON300I |
| CCON350I |
| CCON400I |
| A | B | C |
|---|---|---|
| 1.19 | 0.98 | 0.38 |
| A | B | C |
|---|---|---|
| 1.29 | 1.22 | 0.41 |
| A | B | C |
|---|---|---|
| 1.48 | 1.52 | 0.55 |
| A | B | C |
|---|---|---|
| 1.7 | 1.85 | 0.61 |
| A | B | C |
|---|---|---|
| 1.86 | 2.15 | 0.62 |
| A | B | C |
|---|---|---|
| 2.13 | 2.59 | 0.76 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Cut-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Cut-In
Feature(s): Double Snap Lock®Snap Lock®
Used to terminate armored or metal clad cable to an enclosure or outlet box
- Die-cast from high strength zinc alloy
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| CBXC037DSI |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® AC/MC Connector – Steel
Material: Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXCS037DSI |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXC037 |
| A | B | C |
|---|---|---|
| 0.79 | 0.63 | 0.37 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXC037DSI |
| A | B | C |
|---|---|---|
| 1.45 | 0.76 | 0.39 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Snap Lock®
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| BXC037S |
| A | B | C |
|---|---|---|
| 0.87 | 0.94 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Assembled with die-cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| ASQ037 |
| ASQ050 |
| ASQ075 |
| ASQ100 |
| ASQ125 |
| ASQ150 |
| ASQ200 |
| ASQ250 |
| ASQ300 |
| ASQ350 |
| ASQ400 |
| A | B | C |
|---|---|---|
| 1.18 | 1.29 | 0.39 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.44 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.43 |
| A | B | C |
|---|---|---|
| 2.13 | 2.3 | 0.53 |
| A | B | C |
|---|---|---|
| 3.01 | 2.7 | 0.59 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Double Snap Lock®InsulatedSnap Lock®
Double Snap Lock® 90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
- No tools required
- 90° C rated throat insulator
- Patented design
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| ASQ037DSI |
| ASQ050DSI |
| A | B | C |
|---|---|---|
| 1.37 | 1.73 | 0 |
| A | B | C |
|---|---|---|
| 1.68 | 2.06 | 0 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Insulated
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- 90° C rated throat insulator
- Assembled with die-cast locknut and zinc plated steel screws
- Refer to Connector Listing PDF under RESOURCES tab below for specific cable and conduit ranges
Trade Size
| Model Number |
|---|
| ASQ037I |
| ASQ050I |
| ASQ075I |
| ASQ100I |
| ASQ125I |
| ASQ150I |
| ASQ200I |
| ASQ250I |
| ASQ300I |
| ASQ350I |
| ASQ400I |
| A | B | C |
|---|---|---|
| 1.18 | 1.3 | 0.46 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.51 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.51 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): 90 DegreeSet Screw
90° set screw type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Concrete-tight when taped
Trade Size
| Model Number |
|---|
| ASCN050 |
| ASCN075 |
| A | B | C |
|---|---|---|
| 1.43 | 1.19 | 0.48 |
| A | B | C |
|---|---|---|
| 1.47 | 1.42 | 0.54 |
< Products
Duplex Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Snap-In
Duplex snap-in connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number |
|---|
| AMC052 |
| A | B | C |
|---|---|---|
| 1.66 | 1.76 | 0.89 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Snap-In
Snap-in connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number |
|---|
| AMC050 |
| AMC075 |
| A | B | C |
|---|---|---|
| 1.33 | 0.98 | 1.72 |
| A | B | C |
|---|---|---|
| 1.65 | 1.34 | 2.02 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): 90 DegreeCompression
90° compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Concrete-tight
Trade Size
| Model Number |
|---|
| ACCN050 |
| ACCN075 |
| ACCN100 |
| A | B | C |
|---|---|---|
| 1.35 | 0.98 | 0.51 |
| A | B | C |
|---|---|---|
| 1.47 | 1.23 | 0.52 |
| A | B | C |
|---|---|---|
| 2.17 | 1.52 | 0.68 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Underground Feeder (UF) Cable Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Underground Feeder Cable
UF connectors are used to secure Underground Feeder cable to a metal enclosure or waterproof box with a threaded hub.
- Wet location approved when used with a sealing locknut (not included).
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 18820 | 1 | 10 | Polybag |
| 49092 | 1 | 25 | Polybag |
| 18821 | 1 | 5 | Polybag |
| 49093 | 1 | 10 | Polybag |
| A | B | C |
|---|---|---|
| 1.26 | 0.22 | 0.44 |
| A | B | C |
|---|---|---|
| 1.3 | 0.22 | 0.66 |
UL: E213494
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Service Entrance Cable Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Service Entrance Cable
Service entrance cable connectors are used for sealing and terminating Oval SE cable to a threaded entry of a watertight box or enclosure.
- Wet location approved when used with a sealing locknut (not included).
- Rubber grommet provides water-tight seal around cable
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 02-55760 | 1 | 10 | Boxed - Individual UPC |
| 02-55761 | 1 | 10 | Boxed - Individual UPC |
| 02-55770 | 1 | 6 | Boxed - Individual UPC |
| 02-55781 | 1 | 5 | Boxed - Individual UPC |
| 02-55793 | 1 | 5 | Boxed - Individual UPC |
| 02-55794 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.44 | 0.5 | 0.8 |
| A | B | C |
|---|---|---|
| 1.44 | 0.44 | 0.7 |
| A | B | C |
|---|---|---|
| 1.99 | 0.57 | 0.94 |
| A | B | C |
|---|---|---|
| 2.18 | 0.74 | 1.24 |
| A | B | C |
|---|---|---|
| 2.41 | 0.89 | 1.54 |
| A | B | C |
|---|---|---|
| 2.41 | 1 | 1.58 |
UL: E155410
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Wedge Clamp Connector
Material: Aluminum
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Wedge Clamp
Wedge clamp connectors are used to connect a triplex overhead service entrance cable to a mounting device on a building.
- Stainless Steel Ball
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 51061 | 1 | 10 | Boxed - Individual UPC |
| 51062 | 1 | 5 | Boxed - Individual UPC |
| 51063 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 7.4 | 0.6 | 0.85 |
| A | B | C |
|---|---|---|
| 6.2 | 0.78 | 1.3 |
| A | B | C |
|---|---|---|
| 7.4 | 0.78 | 1.2 |
< Products
Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Assembled with die cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49401 | 1 | 30 | Polybag |
| 55401M | 50 | 1 | Contractor Pack |
| 49407 | 1 | 25 | Polybag |
| 44407 | 3 | 20 | Polybag |
| SC-50 | 25 | 2 | Contractor Pack |
| 49408 | 1 | 25 | Polybag |
| 44408 | 3 | 20 | Polybag |
| 55408M | 25 | 2 | Contractor Pack |
| 02-55410 | 1 | 10 | Boxed - Individual UPC |
| 02-55412 | 1 | 10 | Boxed - Individual UPC |
| 02-55414 | 1 | 10 | Boxed - Individual UPC |
| 02-55416 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1 | 0.41 | 0.62 |
| A | B | C |
|---|---|---|
| 1.5 | 0.5 | 0.99 |
| A | B | C |
|---|---|---|
| 1.59 | 0.5 | 1.18 |
| A | B | C |
|---|---|---|
| 1.75 | 0.55 | 1.44 |
| A | B | C |
|---|---|---|
| 1.9 | 0.61 | 1.76 |
| A | B | C |
|---|---|---|
| 2.03 | 0.61 | 2.06 |
| A | B | C |
|---|---|---|
| 2.1 | 0.61 | 2.55 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Squeeze
Feature(s): Insulated
Squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
- Assembled with die cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69401 | 1 | 30 | Polybag |
| 69407 | 1 | 25 | Polybag |
| 69408 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 1.08 | 0.49 | 0.62 |
| A | B | C |
|---|---|---|
| 1.58 | 0.58 | 0.99 |
| A | B | C |
|---|---|---|
| 1.68 | 0.58 | 1.18 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Compression Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Rigid
Type(s): Connector
Connection Type(s): Compression
Compression type connectors are used to secure and terminate threadless Rigid conduit or IMC to a steel outlet box or metal enclosure.
- Concrete-tight
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49050 | 1 | 25 | Polybag |
| 44050 | 2 | 5 | Polybag |
| 49051 | 1 | 10 | Polybag |
| 44051 | 2 | 5 | Polybag |
| 02-55052 | 1 | 5 | Boxed - Individual UPC |
| 02-55053 | 1 | 2 | Boxed - Individual UPC |
| 02-55054 | 1 | 2 | Boxed - Individual UPC |
| 02-55055 | 1 | 2 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.31 | 1.13 | 0.5 |
| A | B | C |
|---|---|---|
| 1.48 | 1.37 | 0.52 |
| A | B | C |
|---|---|---|
| 1.53 | 1.69 | 0.64 |
| A | B | C |
|---|---|---|
| 1.7 | 2.07 | 0.68 |
| A | B | C |
|---|---|---|
| 1.96 | 2.28 | 0.72 |
| A | B | C |
|---|---|---|
| 2.07 | 2.79 | 0.72 |
< Products
Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49009 | 1 | 50 | Polybag |
| 42009 | 2 | 25 | Polybag |
| 18129 | 4 | 10 | Polybag |
| 56009 | 50 | 10 | Bulk - No individual UPC |
| GC-38 | 50 | 2 | Contractor Pack |
| 49010 | 1 | 50 | Polybag |
| 18130 | 4 | 10 | Polybag |
| 44010 | 5 | 20 | Polybag |
| 56010 | 50 | 10 | Bulk - No individual UPC |
| GC-50 | 50 | 2 | Contractor Pack |
| 49011 | 1 | 20 | Polybag |
| 18131 | 2 | 5 | Polybag |
| 56011 | 25 | 10 | Bulk - No individual UPC |
| GC-75 | 25 | 2 | Contractor Pack |
| 02-56012 | 1 | 10 | Boxed - Individual UPC |
| 02-57013 | 1 | 10 | Boxed - Individual UPC |
| 02-57014 | 1 | 10 | Boxed - Individual UPC |
| 02-57015 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.28 | 0.92 | 0.46 |
| A | B | C |
|---|---|---|
| 1.35 | 0.92 | 0.41 |
| A | B | C |
|---|---|---|
| 1.61 | 1.13 | 0.39 |
| A | B | C |
|---|---|---|
| 1.93 | 1.36 | 0.54 |
| A | B | C |
|---|---|---|
| 2.13 | 1.75 | 0.61 |
| A | B | C |
|---|---|---|
| 2.32 | 2.11 | 0.63 |
| A | B | C |
|---|---|---|
| 2.56 | 2.67 | 0.76 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Insulated
Screw-in type connectors are used to terminate FMC to a knockout in a dry location box or enclosure.
- Screws into conduit
- 90° C rated throat insulator
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69335 | 1 | 50 | Polybag |
| A | B | C |
|---|---|---|
| 1.36 | 0.92 | 0.46 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Screw-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Screw-In
Feature(s): Snap Lock®
Snap Lock® screw-in type connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
- Screws into conduit
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49170 | 1 | 25 | Polybag |
| 42170 | 2 | 20 | Polybag |
| GC-138 | 25 | 2 | Contractor Pack |
| 49171 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 1.19 | 0.83 | 0.4 |
| A | B | C |
|---|---|---|
| 1.18 | 1.3 | 0.39 |
| A | B | C |
|---|---|---|
| 1.27 | 0.83 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight when taped
- 1-1/4″ to 3″ double set screw
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49510 | 1 | 25 | Polybag |
| 46510 | 5 | 30 | Polybag |
| 02-53516 | 50 | 2 | Contractor Pack |
| 49511 | 1 | 12 | Polybag |
| 46511 | 5 | 10 | Polybag |
| 02-53517 | 25 | 2 | Contractor Pack |
| 02-54512 | 1 | 20 | Boxed - Individual UPC |
| 02-54513 | 1 | 10 | Boxed - Individual UPC |
| 02-54514 | 1 | 5 | Boxed - Individual UPC |
| 02-54515 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.22 | 0.41 | 0.65 |
| A | B | C |
|---|---|---|
| 1.3 | 0.41 | 0.86 |
| A | B | C |
|---|---|---|
| 1.61 | 0.43 | 1.11 |
| A | B | C |
|---|---|---|
| 2.3 | 0.65 | 1.41 |
| A | B | C |
|---|---|---|
| 2.4 | 0.69 | 1.65 |
| A | B | C |
|---|---|---|
| 2.44 | 0.71 | 2.13 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- With 90°C rated insulator
- Concrete-tight when taped
- 1-1/4″ to 2″ double set screw
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69512 | 1 | 25 | Polybag |
| 69513 | 1 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.22 | 0.41 | 0.65 |
| A | B | C |
|---|---|---|
| 1.3 | 0.41 | 0.86 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Compression Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-Tight
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight
- 2-1/2” and 3” also listed for Rigid conduit or IMC
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49030 | 1 | 10 | Polybag |
| 46030 | 5 | 20 | Polybag |
| 49031 | 1 | 12 | Polybag |
| 46031 | 5 | 10 | Polybag |
| 02-54532 | 1 | 20 | Boxed - Individual UPC |
| 02-54533 | 1 | 10 | Boxed - Individual UPC |
| 02-54534 | 1 | 5 | Boxed - Individual UPC |
| 02-54535 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.31 | 1.05 | 0.5 |
| A | B | C |
|---|---|---|
| 1.48 | 1.28 | 0.52 |
| A | B | C |
|---|---|---|
| 1.53 | 1.56 | 0.64 |
| A | B | C |
|---|---|---|
| 1.7 | 1.94 | 0.68 |
| A | B | C |
|---|---|---|
| 1.96 | 2.17 | 0.72 |
| A | B | C |
|---|---|---|
| 2.07 | 2.68 | 0.72 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Rain-Tight Compression Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-TightRain-Tight
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For rain-tight and concrete-tight applications.
- Concrete-tight
- Rain-tight
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 02-54853 | 1 | 10 | Boxed - Individual UPC |
| 02-54854 | 1 | 5 | Boxed - Individual UPC |
| 02-54855 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 2.1 | 2.04 | 0.65 |
| A | B | C |
|---|---|---|
| 2.25 | 2.27 | 0.66 |
| A | B | C |
|---|---|---|
| 2.4 | 2.74 | 0.7 |
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
SE Clamp Type Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Clamp Type
Clamp type connectors are used to terminate Oval SE cables to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 44664 | 1 | 20 | Polybag |
| 44675 | 1 | 20 | Polybag |
| 44676 | 1 | 10 | Polybag |
| A | B | C |
|---|---|---|
| 1.31 | 2.26 | 0.59 |
| A | B | C |
|---|---|---|
| 1.33 | 2.85 | 0.62 |
| A | B | C |
|---|---|---|
| 1.57 | 3.5 | 0.72 |
UL: E155410
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight when taped
- 1-1/4″ to 3″ double set screw
- 2-1/2” to 3” also approved for Rigid
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49230 | 1 | 50 | Polybag |
| 18121 | 3 | 10 | Polybag |
| 47230 | 3 | 20 | Polybag |
| 44230 | 5 | 20 | Polybag |
| 45230 | 10 | 12 | Polybag |
| 55230 | 50 | 10 | Bulk - No Individual UPC |
| TC-501 | 50 | 5 | Contractor Pack |
| 49231 | 1 | 25 | Polybag |
| 18123 | 2 | 5 | Polybag |
| 44231 | 5 | 10 | Polybag |
| 55231 | 25 | 10 | Bulk - No Individual UPC |
| TC-502 | 25 | 2 | Contractor Pack |
| 55232M | 1 | 20 | Polybag |
| 02-55232 | 1 | 20 | Polybag |
| 55233M | 1 | 5 | Polybag |
| 02-55233 | 1 | 9 | Polybag |
| 02-55234 | 1 | 4 | Polybag |
| 55234M | 1 | 5 | Polybag |
| 55235M | 1 | 5 | Polybag |
| 02-55235 | 1 | 6 | Polybag |
| 02-55236 | 1 | 5 | Polybag |
| 02-55237 | 1 | 2 | Polybag |
| A | B | C |
|---|---|---|
| 1.07 | 0.39 | 0.72 |
| A | B | C |
|---|---|---|
| 1.33 | 0.46 | 0.93 |
| A | B | C |
|---|---|---|
| 1.46 | 0.53 | 1.17 |
| A | B | C |
|---|---|---|
| 1.94 | 0.63 | 1.52 |
| A | B | C |
|---|---|---|
| 2.18 | 0.71 | 1.75 |
| A | B | C |
|---|---|---|
| 2.49 | 0.75 | 2.2 |
| A | B | C |
|---|---|---|
| 3.09 | 1.04 | 2.91 |
| A | B | C |
|---|---|---|
| 3.39 | 1.06 | 3.53 |
UL: E210498,E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- With 90° C rated insulator
- Concrete-tight when taped
- 1-1/4″ to 2″ double set screw
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 67230 | 3 | 20 | Polybag |
| 65230 | 10 | 20 | Polybag |
| 55330M | 50 | 1 | Contractor Pack |
| 64231 | 5 | 20 | Polybag |
| 55331M | 25 | 1 | Contractor Pack |
| 65232 | 1 | 20 | Boxed - Individual UPC |
| 65233 | 1 | 25 | Boxed - Individual UPC |
| 65234 | 1 | 10 | Boxed - Individual UPC |
| 65235 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.14 | 0.39 | 0.72 |
| A | B | C |
|---|---|---|
| 1.41 | 0.46 | 0.93 |
| A | B | C |
|---|---|---|
| 1.53 | 0.53 | 1.17 |
| A | B | C |
|---|---|---|
| 2.02 | 0.63 | 1.52 |
| A | B | C |
|---|---|---|
| 2.25 | 0.71 | 1.75 |
| A | B | C |
|---|---|---|
| 2.55 | 0.75 | 2.2 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Feature(s): Snap Lock®
Snap Lock® saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49504 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 1.65 | 1.04 | 0.93 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Clamp Type Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Clamp Type
Clamp type connectors are used to terminate NM Sheathed cable, Flexible Cord, Oval or Round SE cables to a knockout in a dry location box or enclosure.
- Male hub threads NPS
- Assembled with die cast locknut and zinc plated screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49650 | 1 | 100 | Polybag |
| 18051 | 4 | 10 | Polybag |
| 45650 | 10 | 20 | Polybag |
| 55650 | 100 | 10 | Bulk - No Individual UPC |
| C-500 | 100 | 2 | Contractor Pack |
| 49660 | 1 | 50 | Polybag |
| 18104 | 2 | 10 | Polybag |
| 44660 | 3 | 20 | Polybag |
| 55660 | 50 | 10 | Bulk - No Individual UPC |
| C-750 | 50 | 2 | Contractor Pack |
| 49663 | 1 | 20 | Polybag |
| 44663 | 2 | 20 | Polybag |
| 55663 | 25 | 10 | Bulk - No Individual UPC |
| 44694 | 1 | 20 | Polybag |
| 44695 | 1 | 20 | Polybag |
| 44696 | 1 | 20 | Polybag |
| A | B | C |
|---|---|---|
| 0.74 | 1.16 | 0.36 |
| A | B | C |
|---|---|---|
| 0.95 | 1.67 | 0.44 |
| A | B | C |
|---|---|---|
| 1.1 | 1.94 | 0.52 |
| A | B | C |
|---|---|---|
| 1.25 | 2.18 | 0.63 |
| A | B | C |
|---|---|---|
| 1.44 | 2.61 | 0.64 |
| A | B | C |
|---|---|---|
| 1.57 | 2.95 | 0.81 |
UL: E213494,E155410
CSA: LR57925
CSA: LR57925
< Products
Snap Lock® Clamp Type Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Clamp Type
Feature(s): Snap Lock®
Snap Lock® clamp type connectors are used to terminate NM Sheathed, Flexible Cord, Oval or Round SE cables to a knockout in a dry location box or enclosure. The Snap Lock® design requires no tools when attaching to the box for faster installation.
- Faster installation – no locknut assembly
- Assembled with die cast locknut and zinc plated screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 44655 | 2 | 25 | Polybag |
| 47655 | 10 | 10 | Polybag |
| C-505 | 25 | 2 | Contractor Pack |
| 44665 | 2 | 15 | Polybag |
| A | B | C |
|---|---|---|
| 0.86 | 1.17 | 0.39 |
| A | B | C |
|---|---|---|
| 1 | 1.67 | 0.47 |
cULus: E213494
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Saddle Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Saddle
Saddle connectors are used to terminate NM, AC or MC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49503 | 1 | 20 | Polybag |
| 44503 | 5 | 10 | Polybag |
| 55503 | 50 | 10 | Polybag |
| A | B | C |
|---|---|---|
| 0.9 | 1.61 | 0.9 |
cULus: E155411
< Products
NM Cable Connector
Material: Non-Metallic
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): NM Cable
NM cable connectors are used to terminate NM Sheathed cable to a knockout in a dry location box or enclosure.
- Easy snap-in construction
- Wide variety of cable configurations
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 18740 | 6 | 10 | Polybag |
| 44740 | 10 | 20 | Polybag |
| 49740 | 1 | 100 | Polybag |
| 55740 | 100 | 5 | Contractor Pack |
| 49741 | 1 | 50 | Polybag |
| 44741 | 5 | 20 | Polybag |
| 55741 | 50 | 2 | Contractor Pack |
| A | B |
|---|---|
| 0.70 | 1.00 |
| A | B |
|---|---|
| 0.80 | 1.30 |
cULus: E213494
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Liquid-Tight Connector
Material: Non-Metallic
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Non-Metallic Type B Conduit
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49490 | 1 | 20 | Polybag |
| 49491 | 1 | 20 | Polybag |
| 02-55492 | 1 | 10 | Polybag |
| A | B | C |
|---|---|---|
| 1.35 | 1.06 | 0.54 |
| A | B | C |
|---|---|---|
| 1.63 | 1.32 | 0.63 |
| A | B | C |
|---|---|---|
| 1.87 | 1.6 | 0.69 |
cCSAus: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Straight Liquid-Tight Connector
Material: Non-Metallic
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Straight liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or Non-Metallic Type B Conduits to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Non-Metallic Type B Conduit
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49460 | 1 | 20 | Polybag |
| 49461 | 1 | 20 | Polybag |
| 02-55462 | 1 | 10 | Polybag |
| A | B | C |
|---|---|---|
| 2 | 1.4 | 0.54 |
| A | B | C |
|---|---|---|
| 2.17 | 1.68 | 0.68 |
| A | B | C |
|---|---|---|
| 2.24 | 2 | 0.69 |
cCSAus: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
NM Cable Connector
Material: Non-Metallic
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): NM Cable
NM cable connectors are used to terminate NM Sheathed cable or Flexible cord to a knockout in a dry location box or enclosure.
- Easy snap-in construction
- Wide variety of cable configurations
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 43840 | 5 | 10 | Polybag |
| 44840 | 10 | 20 | Polybag |
| 44841 | 6 | 20 | Polybag |
| A | B | C |
|---|---|---|
| 0.93 | 1.33 | 0.76 |
| A | B | C |
|---|---|---|
| 0.93 | 1.33 | 0.76 |
cULus: E213494
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Rigid-to-Box Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded
Rigid-to-box pull elbows are used to connect threaded Rigid conduit or IMC to a box where a 90° bend is required. They facilitate pulling conductors through the bend and the removable cover gives ample access so that wire pulling can be achieved without any obstructions.
- Assembled with removable cover and gasket
- Stamped aluminum cover
- Rubber gasket
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49671 | 1 | 10 | Polybag |
| 49672 | 1 | 5 | Polybag |
| A | B | C |
|---|---|---|
| 1.31 | 1 | 0.92 |
| A | B | C |
|---|---|---|
| 1.37 | 1.27 | 1.17 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Conduit-to-Box Combination Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
- Set screw for EMT and threaded for Rigid conduit or IMC
- Removable aluminum cover and rubber gasket
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 46074 | 1 | 10 | Polybag |
| 46075 | 1 | 5 | Polybag |
| A | B | C |
|---|---|---|
| 1.31 | 1 | 0.92 |
| A | B | C |
|---|---|---|
| 1.37 | 1.27 | 1.17 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Box Pull Elbow
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeSet Screw
EMT-to-box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
- Set screw type
- Removable aluminum cover
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49551 | 1 | 10 | Polybag |
| 55551 | 10 | 10 | Bulk - No individual UPC |
| 49552 | 1 | 10 | Polybag |
| 55552 | 5 | 10 | Bulk - No individual UPC |
| A | B | C |
|---|---|---|
| 1.31 | 1 | 0.92 |
| A | B | C |
|---|---|---|
| 1.34 | 0.93 | 0.72 |
| A | B | C |
|---|---|---|
| 1.37 | 1.27 | 1.17 |
| A | B | C |
|---|---|---|
| 1.71 | 1.14 | 0.93 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Box Offset Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): CompressionOffset
Feature(s): Concrete-Tight
Compression type offset connectors are used to make a slight adjustment in terminating the end of a run of steel EMT conduit to a metal box or enclosure. For dry location applications.
- Concrete-tight
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49706 | 1 | 20 | Polybag |
| 49707 | 1 | 20 | Polybag |
| A | B | C |
|---|---|---|
| 2.05 | 0.98 | 0.47 |
| A | B | C |
|---|---|---|
| 2.85 | 1.23 | 0.47 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
EMT-to-Box Offset Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): OffsetSet Screw
Set screw type offset connectors are used to make a slight adjustment in terminating the end of a run of steel EMT conduit to a metal box or enclosure. For dry location applications.
- Concrete-tight when taped
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49006 | 1 | 20 | Polybag |
| 44006 | 2 | 20 | Polybag |
| 49007 | 1 | 12 | Polybag |
| 44007 | 2 | 5 | Polybag |
| 56008M | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 2.09 | 0.93 | 0.41 |
| A | B | C |
|---|---|---|
| 3.02 | 1.12 | 0.47 |
| A | B | C |
|---|---|---|
| 3.15 | 1.42 | 0.55 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 45763 | 1 | 15 | Polybag |
| 45764 | 1 | 10 | Polybag |
| 45765 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.25 | 1.13 | 0.53 |
| A | B | C |
|---|---|---|
| 1.58 | 1.31 | 0.53 |
| A | B | C |
|---|---|---|
| 1.84 | 1.64 | 0.66 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
Standards: UL 514B, CSA C22.2 No. 18
< Products
Straight Liquid-Tight Connector
Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Straight liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or Non-Metallic Type B Conduits to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 45760 | 1 | 15 | Polybag |
| 45761 | 1 | 10 | Polybag |
| 45762 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.69 | 1.14 | 0.53 |
| A | B | C |
|---|---|---|
| 1.78 | 1.38 | 0.53 |
| A | B | C |
|---|---|---|
| 1.95 | 1.61 | 0.66 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18
Standards: UL 514B, CSA C22.2 No. 18
< Products
90° Liquid-Tight Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): 90 Degree
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49470 | 1 | 10 | Polybag |
| 49471 | 1 | 10 | Polybag |
| 02-55472LT | 1 | 10 | Boxed - Individual UPC |
| 02-55473LT | 1 | 10 | Boxed - Individual UPC |
| 02-55474LT | 1 | 4 | Boxed - Individual UPC |
| 02-55475LT | 1 | 4 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.46 | 1.12 | 0.48 |
| A | B | C |
|---|---|---|
| 1.6 | 1.37 | 0.56 |
| A | B | C |
|---|---|---|
| 2.37 | 1.66 | 0.72 |
| A | B | C |
|---|---|---|
| 2.31 | 2.13 | 0.67 |
| A | B | C |
|---|---|---|
| 2.5 | 2.42 | 0.67 |
| A | B | C |
|---|---|---|
| 2.8 | 2.94 | 0.67 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Straight Liquid-Tight Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Liquid-Tight
Type(s): Connector
Connection Type(s): Straight
Straight liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or Non-Metallic Type B Conduits to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
- Furnished with sealing ring
- For Liquid-Tight Flexible Metal and Non-Metallic Type B Conduits
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49430 | 1 | 20 | Polybag |
| 49431 | 1 | 20 | Polybag |
| 02-55432LT | 1 | 10 | Boxed - Individual UPC |
| 02-55433LT | 1 | 10 | Boxed - Individual UPC |
| 02-55434LT | 1 | 4 | Boxed - Individual UPC |
| 02-55435LT | 1 | 4 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.37 | 1.22 | 0.51 |
| A | B | C |
|---|---|---|
| 1.45 | 1.43 | 0.51 |
| A | B | C |
|---|---|---|
| 1.78 | 1.75 | 0.68 |
| A | B | C |
|---|---|---|
| 1.98 | 2.23 | 0.68 |
| A | B | C |
|---|---|---|
| 1.97 | 2.48 | 0.66 |
| A | B | C |
|---|---|---|
| 1.95 | 2.98 | 0.66 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Feature(s): Insulated
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
- 90° C rated throat insulator
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69090 | 1 | 25 | Polybag |
| A | B | C |
|---|---|---|
| 0.96 | 1.55 | 0.4 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Combination Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Combination
Combination connectors are used to terminate AC, MC or FMC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49502 | 1 | 100 | Polybag |
| 44002 | 3 | 20 | Polybag |
| 42002 | 5 | 25 | Polybag |
| C-510 | 100 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 0.74 | 1.16 | 0.36 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Combination Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Combination
Feature(s): Snap Lock®
Combination connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 42028 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 0.77 | 0.91 | 0.39 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Set Screw Flex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Set Screw
Set screw flex connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49090 | 1 | 12 | Polybag |
| 44090 | 3 | 20 | Polybag |
| 44091 | 3 | 5 | Polybag |
| A | B | C |
|---|---|---|
| 0.96 | 1.48 | 0.4 |
| A | B | C |
|---|---|---|
| 1.15 | 1.55 | 0.49 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-TightRain-TightSnap Lock®
Snap Lock® compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. The patent-pending Snap Lock® design provides a faster installation allowing the EMT conduit to snap into the fitting without the use of tools. For wet or dry location applications.
- Conduit snaps into connector
- Concrete-tight
- Rain-tight
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49032 | 1 | 25 | Polybag |
| 49033 | 1 | 15 | Polybag |
| A | B | C |
|---|---|---|
| 1.15 | 1.26 | 0.39 |
| A | B | C |
|---|---|---|
| 1.18 | 1.5 | 0.39 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Clamp type
- Single screw
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 18630 | 1 | 5 | Polybag |
| 49630 | 1 | 20 | Polybag |
| A | B | C |
|---|---|---|
| 1.6 | 1.49 | 0.42 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49635 | 1 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 2.1 | 1.49 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® Duplex Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Duplex
Feature(s): Snap Lock®
Snap Lock® duplex connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49631 | 1 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.64 | 1.45 | 0.41 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Strain Relief Cord Grip Connector
Material: Zinc Die-Cast
Category: FittingsStrain Relief
Sub Category: Accessories
Type(s): Connector
Connection Type(s): Cord GripStraight
Feature(s): with Mesh
Strain relief cord grip connectors are used to connect cord to an outlet box or metal enclosure. They reduce strain on the cables when subject to vibration and motion.
- Indoor commercial and industrial applications
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49222 | 1 | 6 | Polybag |
| 49223 | 1 | 6 | Polybag |
| A | B | C |
|---|---|---|
| 7.87 | 1.78 | 1.12 |
| A | B | C |
|---|---|---|
| 9.25 | 1.93 | 1.36 |
UL: E121487
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Strain Relief Cord Grip Connector
Material: Non-Metallic
Category: FittingsStrain Relief
Sub Category: Accessories
Type(s): Connector
Connection Type(s): Cord GripStraight
Feature(s): with Mesh
Strain relief cord grip connectors are used to connect cord to an outlet box or metal enclosure. They reduce strain on the cables when subject to vibration and motion.
- Indoor commercial and industrial applications
- NEMA 6P rated
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49224 | 1 | 6 | Polybag |
| 49225 | 1 | 6 | Polybag |
| A | B | C |
|---|---|---|
| 8.27 | 2.3 | 1.3 |
| A | B | C |
|---|---|---|
| 8.5 | 2.59 | 1.55 |
cCSAus: 174008
Standards: UL 514B, CSA C22.2 No. 18.3-12
NEMA: NEMA 6P rated
Standards: UL 514B, CSA C22.2 No. 18.3-12
NEMA: NEMA 6P rated
WARNING:
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate.
See www.P65Warnings.ca.gov
< Products
Cord Grip Connector
Material: Zinc Die-Cast
Category: FittingsStrain Relief
Sub Category: Accessories
Type(s): Connector
Connection Type(s): Cord GripStraight
Strain relief cord grip connectors are used to connect S, SO, ST, SJ, SJO and SJT cord to an outlet box or metal enclosure.,Cord grip connectors are used to connect S, SO, ST, SJ, SJO and SJT cord to an outlet box or metal enclosure.
- Water-tight when used in conjunction with a sealing locknut (not included)
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49210 | 1 | 10 | Polybag |
| 49211 | 1 | 10 | Polybag |
| 44211 | 2 | 20 | Polybag |
| 49212 | 1 | 10 | Polybag |
| 49214 | 1 | 10 | Polybag |
| 49215 | 1 | 10 | Polybag |
| A | B | C |
|---|---|---|
| 1.19 | 0.5 | 0.39 |
| A | B | C |
|---|---|---|
| 1.29 | 0.78 | 0.41 |
UL: E121487
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-Tight
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- Concrete-tight
- 2-1/2″ to 3″ also approved for Rigid
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49250 | 1 | 50 | Polybag |
| 18021 | 3 | 10 | Polybag |
| 44250 | 5 | 15 | Polybag |
| 55250 | 50 | 10 | Bulk - No Individual UPC |
| TC-601 | 50 | 2 | Contractor Pack |
| 49251 | 1 | 25 | Polybag |
| 18023 | 2 | 5 | Polybag |
| 44251 | 5 | 5 | Polybag |
| 55251 | 25 | 10 | Bulk - No Individual UPC |
| TC-602 | 25 | 2 | Contractor Pack |
| 55252M | 1 | 10 | Polybag |
| 02-55252 | 1 | 10 | Polybag |
| 55253M | 1 | 5 | Polybag |
| 02-55253 | 1 | 8 | Polybag |
| 55254M | 1 | 5 | Polybag |
| 02-55254 | 1 | 5 | Polybag |
| 55255M | 1 | 5 | Polybag |
| 02-55255 | 1 | 5 | Polybag |
| 02-55256 | 1 | 5 | Polybag |
| 02-55257 | 1 | 2 | Polybag |
| A | B | C |
|---|---|---|
| 1.19 | 0.98 | 0.38 |
| A | B | C |
|---|---|---|
| 1.29 | 1.22 | 0.41 |
| A | B | C |
|---|---|---|
| 1.48 | 1.52 | 0.55 |
| A | B | C |
|---|---|---|
| 1.7 | 1.85 | 0.61 |
| A | B | C |
|---|---|---|
| 1.86 | 2.15 | 0.62 |
| A | B | C |
|---|---|---|
| 2.13 | 2.59 | 0.76 |
| A | B | C |
|---|---|---|
| 2.62 | 3.15 | 1.02 |
| A | B | C |
|---|---|---|
| 2.7 | 3.97 | 1.04 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-TightInsulated
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For dry location applications.
- With 90° C rated insulator
- Concrete-tight
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69250 | 1 | 50 | Polybag |
| 64250 | 5 | 20 | Polybag |
| 55350 | 50 | 2 | Contractor Pack |
| 69251 | 1 | 25 | Polybag |
| 64251 | 5 | 5 | Polybag |
| 55351 | 25 | 2 | Contractor Pack |
| 65525 | 1 | 10 | Boxed - Individual UPC |
| 65253 | 1 | 8 | Boxed - Individual UPC |
| 65254 | 1 | 5 | Boxed - Individual UPC |
| 65255 | 1 | 5 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.19 | 0.98 | 0.38 |
| A | B | C |
|---|---|---|
| 1.29 | 1.22 | 0.41 |
| A | B | C |
|---|---|---|
| 1.48 | 1.52 | 0.55 |
| A | B | C |
|---|---|---|
| 1.7 | 1.85 | 0.61 |
| A | B | C |
|---|---|---|
| 1.86 | 2.15 | 0.62 |
| A | B | C |
|---|---|---|
| 2.13 | 2.59 | 0.76 |
UL: E210498
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Rain-Tight Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): Compression
Feature(s): Concrete-TightRain-Tight
Compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure. For rain-tight and concrete-tight applications.
- Concrete-tight
- Rain-tight
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49850 | 1 | 50 | Polybag |
| 49851 | 1 | 25 | Polybag |
| 02-55852 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.31 | 1.02 | 0.38 |
| A | B | C |
|---|---|---|
| 1.34 | 1.26 | 0.4 |
| A | B | C |
|---|---|---|
| 1.48 | 1.5 | 0.55 |
cULus: E210498
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® Cut-In Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Cut-In
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® cut-in connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in an old work (cut-in) dry location box or enclosure. The Double Snap Lock® design provides a faster installation.
- No tools required
- Flush mount inside the box
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 45510 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.54 | 1.11 | 1.1 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 42505 | 5 | 10 | Polybag |
| 45505 | 2 | 12 | Polybag |
| C-570 | 25 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 1.45 | 0.76 | 0.39 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap Lock® AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Snap Lock®
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
- Faster installation with no locknut required
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 42502 | 5 | 10 | Polybag |
| 45502 | 2 | 12 | Polybag |
| C-560 | 25 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 0.87 | 0.94 | 0.4 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® AC/MC Connector – Steel
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
Feature(s): Double Snap Lock®Snap Lock®
Double Snap Lock® AC/MC connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. The patented Double Snap Lock® design provides a faster installation.
- No tools required
- Robust insulator will not fall out
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 45065 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.42 | 0.79 | 0.39 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
AC/MC Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): AC/MC
AC/MC connectors are used to terminate AC or MC to a knockout in a dry location box or enclosure.
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49501 | 1 | 100 | Polybag |
| 18058 | 4 | 10 | Polybag |
| 45501 | 10 | 15 | Polybag |
| C-550 | 100 | 5 | Contractor Pack |
| A | B | C |
|---|---|---|
| 0.79 | 0.63 | 0.37 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Double Snap Lock® 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Double Snap Lock®InsulatedSnap Lock®
Double Snap Lock® 90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
- No tools required for installation
- 90° C rated throat insulator
- Patented design
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49815 | 2 | 6 | Polybag |
| 49816 | 1 | 12 | Polybag |
| A | B |
|---|---|
| 1.37 | 1.73 |
| A | B |
|---|---|
| 1.68 | 2.06 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Insulated 90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
Feature(s): Insulated
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- 90° C rated throat insulator
- Assembled with die-cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 69801 | 1 | 50 | Polybag |
| 69804 | 1 | 20 | Polybag |
| 69806 | 1 | 20 | Polybag |
| A | B | C |
|---|---|---|
| 1.18 | 1.3 | 0.46 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.51 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.51 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Two Piece Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: NMSE
Type(s): Connector
Connection Type(s): Two Piece
Two piece clamp type connectors are used to terminate one or more NM Sheathed or SE cables to a knockout in a dry location box or enclosure. Also used in old work locations.
- No locknut required
- Butterfly Style
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49652 | 1 | 50 | Polybag |
| 44652 | 5 | 5 | Polybag |
| 49654 | 1 | 50 | Polybag |
| 44654 | 5 | 5 | Polybag |
| A | B | C |
|---|---|---|
| 1.32 | 0.94 | 0.47 |
| A | B | C |
|---|---|---|
| 1.73 | 1.22 | 0.63 |
< Products
90° Set Screw Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): 90 DegreeSet Screw
90° set screw type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Concrete-tight when taped
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49047 | 1 | 25 | Polybag |
| 44047 | 2 | 20 | Polybag |
| 44048 | 2 | 5 | Polybag |
| A | B | C |
|---|---|---|
| 1.43 | 1.19 | 0.48 |
| A | B | C |
|---|---|---|
| 1.47 | 1.42 | 0.54 |
< Products
90˚ Squeeze Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): 90 DegreeSqueeze
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Assembled with die-cast locknut and zinc plated steel screws
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49801 | 1 | 50 | Polybag |
| 44801 | 2 | 20 | Polybag |
| 55801M | 50 | 2 | Contractor Pack |
| 49804 | 1 | 20 | Polybag |
| 55804 | 25 | 10 | Polybag |
| 55804M | 25 | 2 | Contractor Pack |
| 49806 | 1 | 6 | Polybag |
| 55806 | 10 | 10 | Polybag |
| 02-55807 | 1 | 10 | Polybag |
| 02-55808 | 1 | 10 | Polybag |
| 02-55809 | 1 | 4 | Polybag |
| 02-55810 | 1 | 4 | Polybag |
| A | B | C |
|---|---|---|
| 1.18 | 1.29 | 0.39 |
| A | B | C |
|---|---|---|
| 1.51 | 1.63 | 0.44 |
| A | B | C |
|---|---|---|
| 1.65 | 1.89 | 0.43 |
| A | B | C |
|---|---|---|
| 2.13 | 2.3 | 0.53 |
| A | B | C |
|---|---|---|
| 3.01 | 2.7 | 0.59 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
| A | B | C |
|---|---|---|
| 4.8 | 3.59 | 0.71 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
90° Compression Connector
Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMT
Type(s): Connector
Connection Type(s): 90 DegreeCompression
Feature(s): Concrete-Tight
90° compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
- Concrete-tight
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 49057 | 1 | 10 | Polybag |
| 44057 | 2 | 20 | Polybag |
| 49058 | 1 | 10 | Polybag |
| 44058 | 2 | 5 | Polybag |
| 02-56059 | 1 | 10 | Boxed - Individual UPC |
| A | B | C |
|---|---|---|
| 1.35 | 0.98 | 0.51 |
| A | B | C |
|---|---|---|
| 1.47 | 1.23 | 0.52 |
| A | B | C |
|---|---|---|
| 2.17 | 1.52 | 0.68 |
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): Snap-In
Snap-in connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 44440 | 3 | 10 | Polybag |
| AMC-50 | 50 | 2 | Contractor Pack |
| 44441 | 2 | 10 | Polybag |
| AMC-75 | 25 | 2 | Contractor Pack |
| A | B | C |
|---|---|---|
| 1.33 | 0.98 | 1.72 |
| A | B | C |
|---|---|---|
| 1.65 | 1.34 | 2.02 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products
Duplex Snap-In Flex Connector
Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Flex
Type(s): Connector
Connection Type(s): DuplexSnap-In
Duplex snap-in connectors are used to terminate two runs of AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure.
- No tools required when connecting to box
- Insulated
Trade Size
| Model Number | Retail Pack | Master Pack | Package Type |
|---|---|---|---|
| 44450 | 2 | 12 | Polybag |
| A | B | C |
|---|---|---|
| 1.66 | 1.76 | 0.89 |
cULus: E155411
Standards: UL 514B, CSA C22.2 No. 18.3-12
Standards: UL 514B, CSA C22.2 No. 18.3-12