Electrical

An extensive range of robust fittings and weatherproof products.

Automotive

Connectivity solutions such as high brackets, busbars, and connector pins.

Power Transmission & Distribution

Connectors & structural components for cutouts, transformers, & substations.

Aerospace

Complex sensor housings & fracture-critical products.

Appliances

Robust castings and assemblies for everyday appliances.

Commercial Hardware

Finished components for commercial & residential hardware applications.

Electronics & Telecom

Precision metal stamped sensors, connectors and cast housings & covers.

Fluid Power

Durable, precision products for high-pressure applications.

Food & Beverage

Handles, leveling pins, flow valves & button housings.

Lighting

Custom housings to fully assembled commercial & industrial light fixtures.

Marine

Durable corrosion-resistant engineered castings and subassemblies.

Medical & Dental

Medical-grade parts for implants, housings, manifolds, and pumps.

Oil & Gas

Custom housings and covers for flow control, pressure valves & meters.

Power Tools

Durable yet lightweight custom metal housings.

Solar

Innovative precision metal stamped parts.

High Pressure Die Casting

High-pressure liquid metal is pressed into a precision metal mold cavity, and then cooled & solidified under pressure.

Ideal for a wide range of applications, including automotive, agricultural, electronics, and medical.

Sand Casting

Castings with complex shapes & inner cavities that are produced in a sand mold

Ideal for parts with complex shapes and inner cavities

Gravity Die Casting

A mold is filled with liquid metal using gravity and cooled and solidified in the mold to obtain a casting

Ideal for parts with complex shapes made with steel, aluminum or magnesium alloys

Investment Casting

A process used to obtain a mold without a parting surface; creates parts with high dimensional & geometric accuracy

Ideal for near-net shaped parts with complex shapes and high precision requirements

Partner Services

Custom Tooling, Machining, Surface Finishing, Special Purpose Machine Design & Development

Precision Metal Stamping

More than 80 presses convert metal sheets into custom parts

Ideal for parts for electronic connectors and microprocessor chips

Swiss Screw Machining

A specialized CNC machine capable of producing extremely small, precise parts

Ideal for complex miniature screws, contact pins & micro-fasteners

Partner Services

Rapid Prototypes, Heat Treating, Automated Assembly

Company History

Learn more about our company milestones.

Plant Locations

Learn more about our global manufacturing facilities.

Company News

See our company announcements and press releases.

Contact Us

Let us know how we can help create a solution for you

Resources

Download catalogs and key product guides.

Global Code of Conduct

Download our Code of Conduct and report violations.

Innovation at Sigma

Purposeful innovation – the continual improvement and innovation of custom-designed and precision-made products and solutions.

Engineered Solutions

Sigma offers solutions for complex product characteristics and technical requirements.

Global Supply Chain Management

U.S.-based supply chain management teams support our customers.

Partner Services

Sigma is a vertically integrated single-source solution provider.

Jobs – India

Sr Executive/ Dy Manager – Business Development

Key Role & Responsibilities :-
• Market research & Generating leads – companies, contact persons
• Cold calling, email introduction
• Business Development – taking to the level of discussions & interactions with leads.
• Networking – for generating leads
• Analytical skills, data driven
• Scheduling/forecasting/budgeting
• Ensuring meeting/exceeding budget
• Ensuring AR (account receivables)
• Generating & processing RFQ’s
• Day to day interactions with stake holders for related subject matters


Qualification & experience requirement of candidate

5-9 years of experience
Eng. /MBA background preferable not mandatory.

Apply Now
Sr Engineer QA Shift Incharge – A5

Key Role & Responsibilities :-
• To plan & Carry out Layout inspection of NPD & Repeat tool samples.
• To plan & conduct SPC & MSA of NPD & regular production parts.
• To ensure the PCRN & ECRN process is followed.
• To ensure systems of ISO 9001:2015 standard are followed.
• To make & submit PPAP of NPD parts.
• To handle customer PPAP audits.
• To Plan & revise FMEA & Control plan of existing parts.
• To ensure concept finalization of new gauges for NPD & Existing part.


Qualification & experience requirement of candidate

• Candidate should be DME / BE. Preferable having 5 to 8 years of experience to handle NPD –QA
• He should be able to handle 10 – 15 members team.
• Candidate should be expertise in HPDC & Machining process knowledge and Paint process knowledge. Defect knowledge is must.
• Candidate should be expert in GD&T. Experience of Handling CMM machine will be added advantage.
• Candidate should have expertise in quality tools like SPC, MSA, FMEA, and Control Plan.
• Candidate should have hands off experience to do Layout inspection of NPD & Repeat tool samples.
• Candidate should be able to work effectively in diverse group of people.
• Good knowledge and practical experience of Problem solving techniques

Apply Now
Manager – Advance Technology Center

Key Role & Responsibilities :-
• Responsible for complete activities of ATC at Unit II.
• Overall responsible for Improving and sustaining QPCDMS Parameters of ATC department.
• Identify & initiate new projects of LCA, Automation, Technology upgradation for improving QPCDSM parameters.
• TPM- Lead PM & Tool management Pillar & support other pillars of plant.
• Lead & allocate activities for ATC section manpower.
• Ensure Safety in section & plant.
• Interact with vendor for new developments.
• Existing SPM/VMC/CNC/ Tool- PM, Routine & Upgradation activities.
• Responsible for SPM/VMC/CNC/ Tool breakdown.


Qualification & experience requirement of candidate

• Bachelor of Engineering -Min 10~12 Years of hands-on experience in SPM/CNC/VMC/IIOT/ Tooling.
OR
• Diploma in Engineering – Min 12~15 Years of hands-on experience in SPM/CNC/VMC/IIOT/Tooling.
• Important – Candidates handled same portfolio in SPM/CNC/VMC/Tooling will have Preference.

Apply Now
Sr. Engineer – Quality Assurance

Key Role & Responsibilities :-
• To conduct process audits and ensure closure of NC’s
• To Plan & revise FMEA, Control plan and check sheets of existing parts.
• To plan & conduct SPC & MSA regular production parts.
• To ensure the PCRN & ECRN process is followed.
• To plan and conduct sustenance audits.
• To make & submit PPAP of NPD parts.
• To plan and follow up for poka-yoke implementation.
• To participate in SGA’s and guide team for problem solving techniques.
• To maintain daily and monthly MIS.
• To ensure systems of ISO 9001:2015 standard are followed.


Qualification & experience requirement of candidate

• Candidate should be DME / BE. Preferable having 5 to 8 years of experience to handle NPD QA
• He should be able to handle 10 15 members team.
• Candidate should be expertise in Die Casting & Machining process knowledge and Paint process. Defect knowledge is must.
• Candidate should be expert in GD&T. Experience of Handling CMM machine will be added advantage.
• Candidate should have expertise in quality tools like SPC, MSA, FMEA, and Control Plan.
• Candidate should have hands off experience to do Layout inspection of NPD & Repeat tool samples.
• Candidate should be able to work effectively in diverse group of people.
• Good knowledge and practical experience of Problem solving techniques

Apply Now
Senior Engineer – .Net Developer

Key Role & Responsibilities
• ASP.Net MVC Coding C#
• Bootstrap
• Angular JS
• JQuery
• Rest API
• .NET Windows Applications
• Stored Procedure writing
• Need to work as full stack .NET developer.
• Development of SSRS Reports will get additional preference.
• Provide technical support to business users.
• Good team Player

Location: At Manufacturing plants and Office Facilities situated in Chakan, Pune.


Qualification & experience requirement of candidate

Any Graduation in Computer stream
4+ years of experience in .NET development

Apply Now
Deputy Manager – Commercial Finance

Key Role & Responsibilities
• Interaction with various groups and disciplines inside and outside the organization.
• Continuously monitoring actual cost inputs from the shop floor
• Collating actual cost inputs with new RFQs so that all process improvements & current costs are captured while doing RFQ.
• Tab on cost trends of all plants
• Benchmarking actual cost inputs like cycle time, material loss etc with industry standards
• Lost quote analysis
• Low GP improvement
• Drive priority quotes & help management to review critical quotes.
• Drive Breakthrough / cost out program
• Preparation of Long-Range Plan (LRP) for Sigma WW
• Preparation of Sales Budget for Sigma WW including coordination with front end sales owners

Location: At Manufacturing plants and Office Facilities situated in Chakan, Pune.


Qualification & experience requirement of candidate

ICWAI Completed and B.com with 7-10 years of experience.

4.Personal Characteristic :-
Communication skills (Verbal & Written)
Inter-personal skills & Repo building.
Ability to grasp things fast and follow-up skills .
Highly trainable, quick learner
Good analytical skills.

Apply Now
Vice President – Finance

Roles and Responsibilities

  • Establish and maintain and use financial reporting systems to produce accurate operating reporting on the results of the business.
  • Develop and manage financial forecasting for World Wide Operations.
  • Develop and manage Worldwide Budgeting process for Company.
  • Develop and Manage Worldwide Cash Flow forecast.
  • To supervise and manage Taxation / Co. law function and ensure full compliance.
  • To provide various financial and accounting related MIS to Management
  • To facilitate Audits done by various agencies eg. Internal / External
  • To facilitate Audits / reviews done by various other agencies as decided by management.
  • Effectively manage the Finance Function of Indian locations and build a stabled workforce and provide training and support.
  • To lead the Finance function at India Locations and work with all other Functions.

Attributes required:

  • Self-Discipline & Integrity
  • Eye for details
  • Cost consciousness
  • Team Player
  • Transparency
  • Result Oriented

Qualification & experience requirement of candidate

Graduate & CA or ICWA with 25+ years working experience of manufacturing company having multi national business.

Apply Now