MarketsCastingsStampingSourcing SolutionsAbout UsWhy Sigma
Electrical
Electrical

An extensive range of robust fittings and weatherproof products.

Automotive
Automotive

Connectivity solutions such as high brackets, busbars, and connector pins.

Power Transmission & Distribution
Power Transmission & Distribution

Connectors & structural components for cutouts, transformers, & substations.

Aerospace
Aerospace

Complex sensor housings & fracture-critical products.

Appliances
Appliances

Robust castings and assemblies for everyday appliances.

Commercial Hardware
Commercial Hardware

Finished components for commercial & residential hardware applications.

Electronics & Telecom
Electronics & Telecom

Precision metal stamped sensors, connectors and cast housings & covers.

Fluid Power
Fluid Power

Durable, precision products for high-pressure applications.

Food & Beverage
Food & Beverage

Handles, leveling pins, flow valves & button housings.

Lighting
Lighting

Custom housings to fully assembled commercial & industrial light fixtures.

Marine
Marine

Durable corrosion-resistant engineered castings and subassemblies.

Medical & Dental
Medical & Dental

Medical-grade parts for implants, housings, manifolds, and pumps.

Oil & Gas
Oil & Gas

Custom housings and covers for flow control, pressure valves & meters.

Power Tools
Power Tools

Durable yet lightweight custom metal housings.

Solar
Solar

Innovative precision metal stamped parts.

High Pressure Die Casting
High Pressure Die Casting

High-pressure liquid metal is pressed into a precision metal mold cavity, and then cooled & solidified under pressure.

Ideal for a wide range of applications, including automotive, agricultural, electronics, and medical.

Sand Casting
Sand Casting

Castings with complex shapes & inner cavities that are produced in a sand mold

Ideal for parts with complex shapes and inner cavities

Gravity Die Casting
Gravity Die Casting

A mold is filled with liquid metal using gravity and cooled and solidified in the mold to obtain a casting

Ideal for parts with complex shapes made with steel, aluminum or magnesium alloys

Investment Casting
Investment Casting

A process used to obtain a mold without a parting surface; creates parts with high dimensional & geometric accuracy

Ideal for near-net shaped parts with complex shapes and high precision requirements

Partner Services
Partner Services

Custom Tooling, Machining, Surface Finishing, Special Purpose Machine Design & Development

Precision Metal Stamping
Precision Metal Stamping

More than 80 presses convert metal sheets into custom parts

Ideal for parts for electronic connectors and microprocessor chips

Swiss Machining
Swiss Machining

A specialized CNC machine capable of producing extremely small, precise parts

Ideal for complex miniature screws, contact pins & micro-fasteners

Partner Services
Partner Services

Rapid Prototypes, Heat Treating, Automated Assembly

Company History
Company History

Learn more about our company milestones.

Plant Locations
Plant Locations

Learn more about our global manufacturing facilities.

Company News
Company News

See our company announcements and press releases.

Contact Us
Contact Us

Let us know how we can help create a solution for you

Resources
Resources

Download catalogs and key product guides.

Global Code of Conduct
Global Code of Conduct

Download our Code of Conduct and report violations.

Innovation at Sigma
Innovation at Sigma

Purposeful innovation – the continual improvement and innovation of custom-designed and precision-made products and solutions.

Engineered Solutions
Engineered Solutions

Sigma offers solutions for complex product characteristics and technical requirements.

Global Supply Chain Management
Global Supply Chain Management

U.S.-based supply chain management teams support our customers.

Partner Services
Partner Services

Sigma is a vertically integrated single-source solution provider.

Sustainability at Sigma
Sustainability at Sigma

Our commitment to excellence drives us to build a better, more sustainable future in all aspects of our operations.

Safety at Sigma
Safety at Sigma

Safety is more than just a priority at Sigma Engineered Solutions – it’s a core value.

Connection Type: Threaded

< Products

Conduit-to-Box Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number
PE050CBG
PE075CBG
PE100CBG
PE125CBG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Service Entrance Heads – Threaded Type

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: NMSE
Type(s): Service Entrance Head
Connection Type(s): Threaded

Threaded type head used with rigid conduit and IMC for pulling service drop conductors

  • Assembled with electrical grade insulator with multiple holes
  • UL listed and CSA certified for wet location use
  • Die-cast from high strength, corrosion and weather resistant aluminum alloy
Trade Size
Model Number
TH050
TH075
TH100
TH125
TH150
TH200
TH250
TH300
TH300L
TH350
TH400
TH500
TH600
UL,: E121487,
CSA,: LR57925,
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Service Entrance Elbow Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Assembled with fiber gasket and aluminum die cast cover
  • UL listed for wet location use
  • Die cast from high strength, corrosion and weather resistant aluminum alloy
  • Extra long design
Trade Size
Model Number
SLBXL125
SLBXL200
Volume
24.3
Volume
63
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Service Entrance Elbow Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Assembled with fiber gasket and aluminum die cast cover
  • UL listed for wet location use
  • Die cast from high strength, corrosion and weather resistant aluminum alloy
Trade Size
Model Number
SLB050CN
SLB075CN
SLB100CN
Volume
1.8
Volume
3.8
Volume
5.7
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Service Entrance Elbow Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Service entrance ells are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance.

  • Mounts flush against structures
  • Listed for use in wet locations
  • Assembled with removable cover and fiber gasket
Trade Size
Model Number
SLB050
SLB075
SLB100
SLB125
SLB150
SLB200
ABCVolume
3.151.191.451.8
ABCVolume
3.571.521.773.8
ABCVolume
4.181.751.975.7
ABCVolume
5.392.192.4413.5
ABCVolume
6.12.362.4417
ABCVolume
6.612.872.9329.3
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Threaded Coupling

Material: Galvanized Steel
Category: Fittings
Sub Category: Rigid
Type(s): Coupling
Connection Type(s): Threaded

Threaded couplings are used to join two lengths of threaded Rigid conduit or IMC.

Trade Size
Model Number
RTC050
RTC075
RTC100
RTC125
RTC150
RTC200
RTC250
ABC
1.011.630
ABC
1.251.640
ABC
1.521.970
ABC
1.872.030
ABC
2.152.060
ABC
2.652.130
ABC
3.253.190
cULus: E468931
Standards: UL 6, CSA C22.2 No. 45.1-07
< Products

Threaded Nipple

Material: Galvanized Steel
Category: Fittings
Sub Category: Rigid
Type(s): Nipple
Connection Type(s): Threaded

Threaded nipples are used to extend a length of threaded Rigid conduit or IMC. May also be used to connect two steel outlet boxes or metal enclosures together.

Trade Size
Model Number
RN050/150
RN050/200
RN050/300
RN050/400
RN050/500
RN050/600
RN050/CL
RN075/150
RN075/200
RN075/300
RN075/400
RN075/500
RN075/600
RN075/CL
RN100/200
RN100/300
RN100/600
RN100/CL
RN125/200
RN125/300
RN125/600
RN125/CL
RN150/600
RN150/CL
RN200/1000
RN200/300
RN200/400
RN200/500
RN200/600
RN200/800
RN200/CL
RN250/400
RN300/400
AB
0.51.5
AB
0.52
AB
0.53
AB
0.54
AB
0.55
AB
0.56
AB
0.51.12
AB
0.751.5
AB
0.752
AB
0.753
AB
0.754
AB
0.755
AB
0.756
AB
0.751.37
AB
12
AB
13
AB
16
AB
11.5
AB
1.252
AB
1.253
AB
1.256
AB
1.251.63
AB
1.56
AB
1.51.75
AB
21
AB
23
AB
24
AB
25
AB
26
AB
28
AB
22
AB
2.54
AB
34
cULus: E468931
Standards: UL 6, CSA C22.2 No. 45.1-07
< Products

Rigid-to-Rigid Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeThreaded

Rigid-to-rigid pull elbows are used to facilitate pulling conductors through a 90° bend between two runs of threaded Rigid conduit or IMC. The removable cover gives ample access so that wire pulling can be achieved without any obstructions.

  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
PE050RRG
PE075RRG
PE100RRG
PE125RRG
ABC
1.3110.92
ABC
1.371.271.17
ABC
1.951.571.46
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid-to-Rigid Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeThreaded

Used to make a 90° connection with two runs of threaded rigid conduit or IMC

  • Removable aluminum cover permits access for wire pulling
  • Cast from high strength zinc alloy
Trade Size
Model Number
PE050RR
PE075RR
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid-to-Box Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded

Rigid-to-box pull elbows are used to connect threaded Rigid conduit or IMC to a box where a 90° bend is required. They facilitate pulling conductors through the bend and the removable cover gives ample access so that wire pulling can be achieved without any obstructions.

  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
PE050RBG
PE075RBG
PE100RBG
PE125RBG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid-to-Box Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded

Used to make a 90° connection of Threaded Rigid conduit or IMC to a metal box or enclosure

  • Removable aluminum cover permits access for wire pulling
  • Cast from high strength zinc alloy
Trade Size
Model Number
PE050RB
PE075RB
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Conduit-to-Conduit Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of IMC, Rigid or steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number
PE050CCG
PE075CCG
PE100CCG
PE125CCG
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type X

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type X

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLX050
MLX075
MLX100
MLX125
MLX150
MLX200
Volume
5.6
Volume
9.5
Volume
15
Volume
33
Volume
36
Volume
75
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type LR

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LR

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLR050
MLR075
MLR100
MLR125
MLR150
MLR200
MLR250
MLR300
MLR350
MLR400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type LL

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LL

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLL050
MLL075
MLL100
MLL125
MLL150
MLL200
MLL250
MLL300
MLL350
MLL400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type T

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type T

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLT050
MLT075
MLT100
MLT125
MLT150
MLT200
MLT250
MLT300
MLT350
MLT400
Volume
6
Volume
9.5
Volume
15
Volume
33
Volume
36
Volume
75
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type C

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Threaded
Feature(s): Type C

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLC050
MLC075
MLC100
MLC125
MLC150
MLC200
MLC250
MLC300
MLC350
MLC400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type LB

Material: Zinc-Plated Iron
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • NPT threaded hubs
  • Cast from high strength malleable iron/ductile iron and zinc plated
Trade Size
Model Number
MLB050
MLB075
MLB100
MLB125
MLB150
MLB200
MLB250
MLB300
MLB350
MLB400
Volume
4.5
Volume
7.5
Volume
12.5
Volume
32.3
Volume
35.3
Volume
73
Volume
138
Volume
170
Volume
300
Volume
328
UL: E121488
CSA: LR57925
Standards: UL 514B, CSA 22.2 No. 18
< Products

Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type T

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LT050CG
LT075CG
LT100CG
LT125CG
LT150CG
LT200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type T

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LTC050AN
LTC075AN
LTC100AN
LTC125AN
LTC150AN
LTC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type T

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LTC050
LTC075
LTC100
LTC125
LTC150
LTC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type T

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
LT050AN
LT075AN
LT100AN
LT125AN
LT150AN
LT200AN
LT250AN
LT300AN
LT350AN
LT400AN
ABCVolume
4.42.11.64.35
ABCVolume
5.52.31.97.3
ABCVolume
6.221.752.0712.2
ABCVolume
8.272.482.8433.1
ABCVolume
8.272.482.8433.1
ABCVolume
10.243.133.5867
Volume
149
Volume
175
Volume
298
Volume
300
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type T

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LT050
LT075
LT100
LT125
LT150
LT200
LT250
LT300
LT350
LT400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.1
Volume
33.1
Volume
67
Volume
149
Volume
175
Volume
298
Volume
300
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LR

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LR050CG
LR075CG
LR100CG
LR125CG
LR150CG
LR200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LR

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LRC050AN
LRC075AN
LRC100AN
LRC125AN
LRC150AN
LRC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LR

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LRC050
LRC075
LRC100
LRC125
LRC150
LRC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LR

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.,Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket,Cast from high strength corrosion and weather resistant aluminum alloy
  • Stamped aluminum cover,
  • Rubber gasket,
Trade Size
Model Number
LR050AN
LR075AN
LR100AN
LR125AN
LR150AN
LR200AN
LR250AN
LR300AN
LR350AN
LR400AN
ABCVolume
4.42.11.64.35
ABCVolume
5.12.31.97.3
ABCVolume
5.81.752.0712.2
ABCVolume
7.762.482.8435.8
ABCVolume
7.762.482.8435.1
ABCVolume
9.843.133.5969.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LR

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LR050
LR075
LR100
LR125
LR150
LR200
LR250
LR300
LR350
LR400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
35.8
Volume
35.1
Volume
69.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LL

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LLC050AN
LLC075AN
LLC100AN
LLC125AN
LLC150AN
LLC200AN
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LL

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LL050CG
LL075CG
LL100CG
LL125CG
LL150CG
LL200CG
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LL

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LLC050
LLC075
LLC100
LLC125
LLC150
LLC200
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LL

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
LL050AN
LL075AN
LL100AN
LL125AN
LL150AN
LL200AN
LL250AN
LL300AN
LL350AN
LL400AN
ABCVolume
4.42.11.64.3
ABCVolume
5.12.31.97.3
ABCVolume
5.81.752.0712.2
ABCVolume
7.762.482.8435.4
ABCVolume
7.762.482.8435.6
ABCVolume
9.843.133.5969.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LL

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LL050
LL075
LL100
LL125
LL150
LL200
LL250
LL300
LL350
LL400
Volume
4.3
Volume
7.3
Volume
12.2
Volume
35.4
Volume
35.6
Volume
69.7
Volume
158
Volume
186
Volume
306
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Threaded
Feature(s): Type C

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LC050CG
LC075CG
LC100CG
LC125CG
LC150CG
LC200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): CombinationSet ScrewThreaded
Feature(s): Type C

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LCC050AN
LCC075AN
LCC100AN
LCC125AN
LCC150AN
LCC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): CombinationSet ScrewThreaded
Feature(s): Type C

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LCC050
LCC075
LCC100
LCC125
LCC150
LCC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Threaded
Feature(s): Type C

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
LC050AN
LC075AN
LC100AN
LC125AN
LC150AN
LC200AN
LC250AN
LC300AN
LC350AN
LC400AN
ABCVolume
4.81.31.64.35
ABCVolume
5.51.51.97.3
ABCVolume
6.221.752.0712.2
ABCVolume
8.272.482.8433.4
ABCVolume
8.272.482.8433.5
ABCVolume
10.243.133.5969.5
Volume
159
Volume
188
Volume
307
Volume
309
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Threaded
Feature(s): Type C

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LC050
LC075
LC100
LC125
LC150
LC200
LC250
LC300
LC350
LC400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
33.4
Volume
33.5
Volume
69.5
Volume
159
Volume
188
Volume
307
Volume
309
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Mogul Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): MogulType LB

Mogul conduit bodies are used to gain greater access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Meets NEC 6x requirement
  • Listed for use in wet locations
  • Assembled with removable cover and fiber gasket
Trade Size
Model Number
LBMO125CG
LBMO150CG
LBMO200CG
ABCVolume
9.672.524.2940
ABCVolume
14.573.196.32128
ABCVolume
14.573.196.32128
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LB050CG
LB075CG
LB100CG
LB125CG
LB150CG
LB200CG
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LB

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LBC050AN
LBC075AN
LBC100AN
LBC125AN
LBC150AN
LBC200AN
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LB

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LBC050
LBC075
LBC0100
LBC0125
LBC150
LBC200
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
UL: E121488
CSA: LR57925
Standards: UL 514A & 514B, CSA C22.2 No. 18.1-13 & C22.2 No. 18.3-12
< Products

Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number
LB050AN
LB075AN
LB100AN
LB125AN
LB150AN
LB200AN
LB250AN
LB300AN
LB350AN
LB400AN
ABCVolume
4.31.32.44.35
ABCVolume
51.52.67.3
ABCVolume
5.81.82.912.2
ABCVolume
7.82.53.732.3
ABCVolume
7.82.53.933.8
ABCVolume
9.83.24.771.2
ABCVolume
12.834.445.35153
ABCVolume
12.834.445.96183.5
Volume
304.9
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Flat back design for easy mounting close to walls
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
LB050
LB075
LB100
LB125
LB150
LB200
LB250
LB300
LB350
LB400
Volume
4.35
Volume
7.3
Volume
12.2
Volume
32.3
Volume
33.8
Volume
71.2
Volume
153
Volume
183.5
Volume
304.9
Volume
308
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LB

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

  • Assembled with slotted / Robertson combination screws
  • Assembled with rubber gasket and stamped cover
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
CLBC050AN
CLBC075AN
CLBC100AN
CLBC125AN
CLBC150AN
CLBC200AN
CSA: LR57925
< Products

Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

  • Combination conduit bodies also accommodate EMT applications
  • Assembled with slotted / Robertson combination screws
  • Assembled with rubber gasket and stamped cover
  • Cast from high strength corrosion and weather resistant aluminum alloy
Trade Size
Model Number
CLB050AN
CLB075AN
CLB100AN
CLB125AN
CLB150AN
CLB200AN
CSA: LR57925
< Products

Service Entrance Elbow Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Service entrance ells are used for Rigid conduit or IMC to gain access to the interior of a raceway for wire pulling, inspection and maintenance.

  • Mounts flush against structures
  • Listed for use in wet locations
  • Assembled with removable cover and fiber gasket
Trade Size
Model Number Retail Pack Master Pack Package Type
02-51025 1 10 Polybag
02-51026 1 5 Polybag
02-51027 1 3 Polybag
02-51028 1 2 Polybag
02-51029 1 2 Polybag
02-51030 1 2 Polybag
ABC
3.151.191.45
ABC
3.571.521.77
ABC
4.181.751.97
ABC
5.392.192.44
ABC
6.12.362.44
ABC
6.612.872.93
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Threaded Coupling

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Rigid
Type(s): Coupling
Connection Type(s): Threaded

Threaded couplings are used to join two lengths of threaded Rigid conduit or IMC.

Trade Size
Model Number Retail Pack Master Pack Package Type
02-55080 1 12 Boxed - Individual UPC
02-55081 1 12 Boxed - Individual UPC
02-55082 1 10 Boxed - Individual UPC
02-55083 1 5 Boxed - Individual UPC
02-55084 1 5 Boxed - Individual UPC
02-55085 1 4 Boxed - Individual UPC
02-55086 1 4 Boxed - Individual UPC
AB
1.011.63
AB
1.251.64
AB
1.521.97
AB
1.872.03
AB
2.152.06
AB
2.652.13
AB
3.253.19
cULus: E468931
Standards: UL 6, CSA C22.2 No. 45.1-07
< Products

Threaded Nipple

Material: Zinc-Plated Steel
Category: Fittings
Sub Category: Rigid
Type(s): Nipple
Connection Type(s): Threaded

Threaded nipples are used to extend a length of threaded Rigid conduit or IMC. May also be used to connect two steel outlet boxes or metal enclosures together.

Trade Size
Model Number Retail Pack Master Pack Package Type
44360 2 10 Polybag
54251 1 25 Polybag
44370 2 8 Polybag
54254 1 25 Polybag
54258 1 25 Polybag
44361 2 8 Polybag
54261 1 25 Polybag
44371 2 5 Polybag
54264 1 25 Polybag
54268 1 25 Polybag
54270 1 10 Polybag
54274 1 10 Polybag
54280 1 10 Polybag
54281 1 25 Polybag
54284 1 10 Polybag
54364 1 6 Polybag
54290 1 10 Polybag
54365 1 4 Polybag
54300 1 10 Polybag
54304 1 6 Polybag
54306 1 5 Polybag
54366 1 5 Polybag
54309 1 2 Polybag
54355 1 2 Polybag
54326 1 2 Polybag
AB
0.51.12
AB
0.51.5
AB
0.52
AB
0.53
AB
0.56
AB
0.751.37
AB
0.751.5
AB
0.752
AB
0.753
AB
0.756
AB
11.5
AB
13
AB
1.251.63
AB
1.252
AB
1.253
AB
1.256
AB
1.51.75
AB
1.56
AB
22
AB
23
AB
24
AB
26
AB
28
AB
210
AB
34
cULus: E468931
Standards: UL 6, CSA C22.2 No. 45.1-07
< Products

Rigid-to-Rigid Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeThreaded

Rigid-to-rigid pull elbows are used to facilitate pulling conductors through a 90° bend between two runs of threaded Rigid conduit or IMC. The removable cover gives ample access so that wire pulling can be achieved without any obstructions.

  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number Retail Pack Master Pack Package Type
49681 1 10 Polybag
49682 1 10 Polybag
02-55683 1 10 Boxed - Individual UPC
ABC
1.3110.92
ABC
1.371.271.17
ABC
1.951.571.46
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Rigid-to-Box Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeThreaded

Rigid-to-box pull elbows are used to connect threaded Rigid conduit or IMC to a box where a 90° bend is required. They facilitate pulling conductors through the bend and the removable cover gives ample access so that wire pulling can be achieved without any obstructions.

  • Assembled with removable cover and gasket
  • Stamped aluminum cover
  • Rubber gasket
Trade Size
Model Number Retail Pack Master Pack Package Type
49671 1 10 Polybag
49672 1 5 Polybag
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Conduit-to-Conduit Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): CouplingPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of IMC, Rigid or steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number Retail Pack Master Pack Package Type
46077 1 10 Polybag
46078 1 10 Polybag
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Conduit-to-Box Combination Pull Elbow

Material: Zinc Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): ConnectorPull Elbow
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded

Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Removable aluminum cover and rubber gasket
Trade Size
Model Number Retail Pack Master Pack Package Type
46074 1 10 Polybag
46075 1 5 Polybag
ABC
1.3110.92
ABC
1.371.271.17
UL: E155411
CSA: LR57925
Standards: UL 514B, CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type T

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type T

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
Trade Size
Model Number Retail Pack Master Pack Package Type
02-55641T 1 5 Boxed - Individual UPC
02-55642T 1 5 Boxed - Individual UPC
02-55643T 1 2 Boxed - Individual UPC
02-55644T 1 2 Boxed - Individual UPC
02-55645T 1 2 Boxed - Individual UPC
02-55646T 1 2 Boxed - Individual UPC
ABC
4.42.11.6
ABC
5.52.31.9
ABC
6.221.752.07
ABC
8.272.482.84
ABC
8.272.482.84
ABC
10.243.133.58
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LR

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
Trade Size
Model Number Retail Pack Master Pack Package Type
02-55641LR 1 5 Boxed - Individual UPC
02-55642LR 1 3 Boxed - Individual UPC
02-55643LR 1 2 Boxed - Individual UPC
02-55644LR 1 2 Boxed - Individual UPC
02-55645LR 1 2 Boxed - Individual UPC
02-55646LR 1 2 Boxed - Individual UPC
ABC
4.42.11.6
ABC
5.12.31.9
ABC
5.81.752.07
ABC
7.762.482.84
ABC
7.762.482.84
ABC
9.843.133.59
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Combination Conduit Body – Type LL/LR

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: EMTRigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeCombinationSet ScrewThreaded
Feature(s): Type LLType LR

Combination conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction. Pre-assembled with two covers and gaskets for configuration as LL or LR conduit body.

  • Combination type LL/LR
  • Set screw for EMT and threaded for Rigid conduit or IMC
  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
Trade Size
Model Number Retail Pack Master Pack Package Type
02-55941LLR 1 5 Polybag
02-55942LLR 1 5 Polybag
ABC
4.41.942.07
ABC
5.072.182.29
cULus: E121488
Standards: UL 514A, CSA C22.2 No. 18.1-13
< Products

Conduit Body – Type LL

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LL

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
Trade Size
Model Number Retail Pack Master Pack Package Type
02-55641LL 1 5 Boxed - Individual UPC
02-55642LL 1 3 Boxed - Individual UPC
02-55643LL 1 2 Boxed - Individual UPC
02-55644LL 1 2 Boxed - Individual UPC
02-55645LL 1 2 Boxed - Individual UPC
02-55646LL 1 2 Boxed - Individual UPC
ABC
4.42.11.6
ABC
5.12.31.9
ABC
5.81.752.07
ABC
7.762.482.84
ABC
7.762.482.84
ABC
9.843.133.59
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type C

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): Threaded
Feature(s): Type C

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
Trade Size
Model Number Retail Pack Master Pack Package Type
02-55641C 1 5 Boxed - Individual UPC
02-55642C 1 5 Boxed - Individual UPC
02-55643C 1 2 Boxed - Individual UPC
02-55644C 1 2 Boxed - Individual UPC
02-55645C 1 2 Boxed - Individual UPC
02-55646C 1 2 Boxed - Individual UPC
ABC
4.81.31.6
ABC
5.51.51.9
ABC
6.221.752.07
ABC
8.272.482.84
ABC
8.272.482.84
ABC
10.243.133.59
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): Type LB

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Flat back design for easy mounting close to walls
  • Assembled with removable cover and gasket
  • Stamped aluminum cover
Trade Size
Model Number Retail Pack Master Pack Package Type
02-55641LB 1 10 Boxed - Individual UPC
02-55642LB 1 10 Boxed - Individual UPC
02-55643LB 1 5 Boxed - Individual UPC
02-55644LB 1 2 Boxed - Individual UPC
02-55645LB 1 2 Boxed - Individual UPC
02-55646LB 1 2 Boxed - Individual UPC
02-55647LB 1 1 Boxed - Individual UPC
02-55648LB 1 1 Boxed - Individual UPC
ABC
4.31.32.4
ABC
51.52.6
ABC
5.81.82.9
ABC
7.82.53.7
ABC
7.82.53.9
ABC
9.83.24.7
ABC
12.834.445.35
ABC
12.834.445.96
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
< Products

Mogul Conduit Body – Type LB

Material: Aluminum Die-Cast
Category: Fittings
Sub Category: Rigid
Type(s): Conduit Body
Connection Type(s): 90 DegreeThreaded
Feature(s): MogulType LB

Mogul conduit bodies are used to gain greater access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Meets NEC 6x requirement
  • Listed for use in wet locations
  • Assembled with removable cover and fiber gasket
Trade Size
Model Number Retail Pack Master Pack Package Type
02-51128 1 2 Boxed - Individual UPC
02-51129 1 1 Boxed - Individual UPC
02-51130 1 1 Boxed - Individual UPC
ABC
9.672.524.29
ABC
14.573.196.32
ABC
14.573.196.32
UL: E121488
CSA: LR57925
Standards: UL 514A & UL 514B, CSA C22.2 No. 18.1-13 & CSA C22.2 No. 18.3-12
Other: NEC Article 345 & 346