Conduit-to-Box Combination Pull Elbow

Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

• Set screw for EMT and threaded for Rigid conduit or IMC
• Removable aluminum cover and rubber gasket

• Product Info
• Dimensions
• Listing

Model Number
PE050CBG
PE075CBG
PE100CBG
PE125CBG

A	B	C
1.31	1	0.92

A	B	C
1.37	1.27	1.17

UL: E155411
CSA: LR57925

---

Standards: UL 514B, CSA C22.2 No. 18.3-12

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

Service Entrance Heads – Set Screw Type

Set screw type head used with rigid and IMC for pulling service drop conductors

• Assembled with electrical grade insulator with multiple holes
• UL listed and CSA certified for wet location use
• Die-cast from high strength, corrosion and weather resistant aluminum alloy

Set Screw Coupling

Set screw type couplings are used to join lengths of steel EMT conduit. For dry location applications.

• Concrete-tight when taped
• 1-1/4″ to 3″ double set screw

Insulated Set Screw Connector

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

• With 90°C rated insulator
• Concrete-tight when taped
• 1-1/4″ to 2″ double set screw

Set Screw Connector

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

• Concrete-tight when taped
• 1-1/4″ to 3″ double set screw

Set Screw Coupling

Set screw type couplings are used to join lengths of steel EMT conduit. For dry location applications.

• Concrete-tight when taped
• Double set screw
• 2-1/2” to 4” approved for Rigid

Insulated Set Screw Connector

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

• With 90° C rated insulator
• Concrete-tight when taped
• 1-1/4″ to 4″ double set screw

Set Screw Connector

Set screw type connectors are used to secure and terminate EMT conduit to a knockout in a metal box or enclosure. For dry location applications.

• Concrete-tight when taped
• 1-1/4″ to 4″ double set screw
• 2-1/2” to 4” approved for Rigid

Rigid Set Screw Connectors

Used to connect threadless rigid conduit or IMC to a steel box or other enclosure

EMT-to-EMT Pull Elbow

Used to make a 90° connection of two runs of steel EMT conduit

• Removable aluminum cover permits access for wire pulling
• Cast from high strength zinc alloy
• Furnished with rubber gasket

EMT-to-EMT Pull Elbow

EMT-to-EMT pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

• Set screw type
• Removable aluminum cover

• Product Info
• Dimensions
• Listing

Model Number
PE050EE
PE075EE
PE100EE
PE125EE

A	B	C
1.31	1	0.92

A	B	C
1.37	1.27	1.17

A	B	C
1.95	1.57	1.46

UL: E155411
CSA: LR57925

---

Standards: UL 514B, CSA C22.2 No. 18.3-12

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

EMT-to-Box Pull Elbow

Used to make a 90° connection of Steel EMT conduit to a metal box or enclosure

• Removable aluminum cover permits access for wire pulling
• Cast from high strength zinc alloy
• Furnished with rubber gasket

EMT-to-Box Pull Elbow

EMT-to-box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

• Set screw type
• Removable aluminum cover

• Product Info
• Dimensions
• Listing

Model Number
PE050EB
PE075EB
PE100EB
PE125EB

A	B	C
1.31	1	0.92

A	B	C
1.37	1.27	1.17

UL: E155411
CSA: LR57925

---

Standards: UL 514B, CSA C22.2 No. 18.3-12

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

Conduit-to-Conduit Combination Pull Elbow

Combination pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of IMC, Rigid or steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.

• Set screw for EMT and threaded for Rigid conduit or IMC
• Removable aluminum cover and rubber gasket

• Product Info
• Dimensions
• Listing

Model Number
PE050CCG
PE075CCG
PE100CCG
PE125CCG

A	B	C
1.31	1	0.92

A	B	C
1.37	1.27	1.17

UL: E155411
CSA: LR57925

---

Standards: UL 514B, CSA C22.2 No. 18.3-12

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

EMT-to-Box Offset Set Screw Connector

Set screw type offset connectors are used to make a slight adjustment in terminating the end of a run of steel EMT conduit to a metal box or enclosure. For dry location applications.

• Concrete-tight when taped

Set Screw Conduit Bushing

Used to terminate threaded rigid conduit or IMC to an enclosure

• With 3 tapped holes

Insulated Set Screw Conduit Bushing

Used to terminate rigid conduit or IMC to an enclosure

• Bushing throat provides a smooth surface to prevent damage to wire during pulling
• With 150°C rated insulator

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Used to terminate rigid conduit or IMC to an enclosure

• Provided with lay-in style copper lug for easy attachment of grounding wire
• With 150°C rated insulator

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Used to terminate rigid conduit or IMC to an enclosure

• Provided with lay-in style copper lug for easy attachment of grounding wire
• With 150°C rated insulator

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Used to terminate rigid conduit or IMC to an enclosure

• Provided with lay-in style copper lug for easy attachment of grounding wire
• With 150°C rated insulator

Insulated Set Screw Conduit Bushing

Used to terminate rigid conduit or IMC to an enclosure

• Bushing throat provides a smooth surface to prevent damage to wire during pulling
• With 105°C rated insulator

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Used to terminate rigid conduit or IMC to an enclosure

• Provided with lay-in style copper lug for easy attachment of grounding wire
• With 105°C rated insulator

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Used to terminate rigid conduit or IMC to an enclosure

• Provided with lay-in style copper lug for easy attachment of grounding wire
• With 105°C rated insulator

Insulated Set Screw Grounding Bushing with Copper Lay-in-Lug

Used to terminate rigid conduit or IMC to an enclosure

• Provided with lay-in style copper lug for easy attachment of grounding wire
• With 105°C rated insulator

Set Screw Conduit Body – Type T

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

• Flat back design for easy mounting close to walls
• Set screw hubs to accommodate EMT
• Cast from high strength corrosion and weather resistant aluminum alloy
• Includes fiber gasket & die-cast cover

Set Screw Conduit Body – Type T

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

• Flat back design for easy mounting close to walls
• Set screw hubs to accommodate EMT
• Cast from high strength corrosion and weather resistant aluminum alloy
• Includes rubber gasket & stamped cover

Set Screw Conduit Body – Type T

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

• Flat back design for easy mounting close to walls
• Set screw hubs to accommodate EMT
• Cast from high strength corrosion and weather resistant aluminum alloy

Combination Conduit Body – Type T

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

• Flat back design for easy mounting close to walls
• Cast from high strength corrosion and weather resistant aluminum alloy

Combination Conduit Body – Type T

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

• Flat back design for easy mounting close to walls
• Cast from high strength corrosion and weather resistant aluminum alloy

Set Screw Conduit Body – Type LR

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance

• Flat back design for easy mounting close to walls
• Set screw hubs to accommodate EMT
• Cast from high strength corrosion and weather resistant aluminum alloy
• Includes fiber gasket & die-cast cover