Electrical
An extensive range of robust fittings and weatherproof products.
Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number |
---|
PE050CBG |
PE075CBG |
PE100CBG |
PE125CBG |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used to connect threaded rigid conduit or IMC to a steel box or other enclosure where a close radius is desired
Model Number |
---|
SRE050 |
SRE075 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
SLBXL125 |
SLBXL200 |
Volume |
---|
24.3 |
Volume |
---|
63 |
Service entrance ells are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance.
Model Number |
---|
SLB050 |
SLB075 |
SLB100 |
SLB125 |
SLB150 |
SLB200 |
A | B | C | Volume |
---|---|---|---|
3.15 | 1.19 | 1.45 | 1.8 |
A | B | C | Volume |
---|---|---|---|
3.57 | 1.52 | 1.77 | 3.8 |
A | B | C | Volume |
---|---|---|---|
4.18 | 1.75 | 1.97 | 5.7 |
A | B | C | Volume |
---|---|---|---|
5.39 | 2.19 | 2.44 | 13.5 |
A | B | C | Volume |
---|---|---|---|
6.1 | 2.36 | 2.44 | 17 |
A | B | C | Volume |
---|---|---|---|
6.61 | 2.87 | 2.93 | 29.3 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
SLB050CN |
SLB075CN |
SLB100CN |
Volume |
---|
1.8 |
Volume |
---|
3.8 |
Volume |
---|
5.7 |
90° rigid elbows are used to connect Rigid conduit or IMC together to allow for 90° bends.
Model Number |
---|
REN050 |
REN075 |
REN100 |
REN125 |
REN150 |
REN200 |
A | B | C |
---|---|---|
4.02 | 6.38 | 1.5 |
A | B | C |
---|---|---|
4.49 | 7.44 | 1.5 |
A | B | C |
---|---|---|
5.75 | 8.84 | 1.89 |
A | B | C |
---|---|---|
7.24 | 10.12 | 2.01 |
A | B | C |
---|---|---|
8.27 | 11.94 | 2.01 |
A | B | C |
---|---|---|
9.49 | 14.08 | 2.01 |
Used to terminate and seal liquid-tight flexible metal and non-metallic type B conduit to a box or enclosure at a 90° angle
Model Number |
---|
PLTA050B |
PLTA075B |
PLTA100B |
Used to make a 90° connection with two runs of threaded rigid conduit or IMC
Model Number |
---|
PE050RR |
PE075RR |
Rigid-to-rigid pull elbows are used to facilitate pulling conductors through a 90° bend between two runs of threaded Rigid conduit or IMC. The removable cover gives ample access so that wire pulling can be achieved without any obstructions.
Model Number |
---|
PE050RRG |
PE075RRG |
PE100RRG |
PE125RRG |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
A | B | C |
---|---|---|
1.95 | 1.57 | 1.46 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
Model Number |
---|
PLTA037 |
PLTA050 |
PLTA075 |
PLTA100 |
A | B | C |
---|---|---|
1.35 | 1.06 | 0.54 |
A | B | C |
---|---|---|
1.63 | 1.32 | 0.63 |
A | B | C |
---|---|---|
1.87 | 1.6 | 0.69 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used to make a 90° connection of two runs of steel EMT conduit
Model Number |
---|
PE050EEG |
PE075EEG |
PE100EEG |
PE125EEG |
Used to make a 90° connection of Threaded Rigid conduit or IMC to a metal box or enclosure
Model Number |
---|
PE050RB |
PE075RB |
Rigid-to-box pull elbows are used to connect threaded Rigid conduit or IMC to a box where a 90° bend is required. They facilitate pulling conductors through the bend and the removable cover gives ample access so that wire pulling can be achieved without any obstructions.
Model Number |
---|
PE050RBG |
PE075RBG |
PE100RBG |
PE125RBG |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
EMT-to-box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number |
---|
PE050EB |
PE075EB |
PE100EB |
PE125EB |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used to make a 90° connection of Steel EMT conduit to a metal box or enclosure
Model Number |
---|
PE050EBG |
PE075EBG |
PE100EBG |
PE125EBG |
EMT-to-EMT pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number |
---|
PE050EE |
PE075EE |
PE100EE |
PE125EE |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
A | B | C |
---|---|---|
1.95 | 1.57 | 1.46 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Combination pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of IMC, Rigid or steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number |
---|
PE050CCG |
PE075CCG |
PE100CCG |
PE125CCG |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
Model Number |
---|
MNTA037L |
MNTA050L |
MNTA075L |
MNTA100L |
MLTA125L |
MLTA150L |
MLTA200L |
MLTA250L |
MLTA300L |
MLTA350L |
MLTA400L |
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
Model Number |
---|
MNTA037I |
MNTA050I |
MNTA075I |
MNTA100I |
MLTA125I |
MLTA150I |
MLTA200I |
MLTA250I |
MLTA300I |
MLTA350I |
MLTA400I |
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
Model Number |
---|
MNTA037IC |
MNTA050IC |
MNTA075IC |
MNTA100IC |
MLTA125IC |
MLTA150IC |
MLTA200IC |
MLTA250IC |
MLTA300IC |
MLTA350IC |
MLTA400IC |
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
Model Number |
---|
MNTA037IL |
MNTA050IL |
MNTA075IL |
MNTA100IL |
MLTA125IL |
MLTA150IL |
MLTA200IL |
MLTA250IL |
MLTA300IL |
MLTA350IL |
MLTA400IL |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
MLX050 |
MLX075 |
MLX100 |
MLX125 |
MLX150 |
MLX200 |
Volume |
---|
5.6 |
Volume |
---|
9.5 |
Volume |
---|
15 |
Volume |
---|
33 |
Volume |
---|
36 |
Volume |
---|
75 |
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.,Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B Conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
Model Number |
---|
MNTA037 |
MNTA050 |
MNTA075 |
MNTA100 |
MLTA125 |
MLTA150 |
MLTA200 |
MLTA250 |
MLTA300 |
MLTA350 |
MLTA400 |
A | B | C |
---|---|---|
1.25 | 1.13 | 0.53 |
A | B | C |
---|---|---|
1.58 | 1.31 | 0.53 |
A | B | C |
---|---|---|
1.84 | 1.64 | 0.66 |
Used to terminate and seal liquid tight flexible metal and liquid tight flexible non-metallic type B conduits to either an oil-tight, liquid-tight, rain-tight box, or enclosure
Model Number |
---|
MNTA037C |
MNTA050C |
MNTA075C |
MNTA100C |
MLTA125C |
MLTA150C |
MLTA200C |
MLTA250C |
MLTA300C |
MLTA350C |
MLTA400C |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
MLL050 |
MLL075 |
MLL100 |
MLL125 |
MLL150 |
MLL200 |
MLL250 |
MLL300 |
MLL350 |
MLL400 |
Volume |
---|
4.5 |
Volume |
---|
7.5 |
Volume |
---|
12.5 |
Volume |
---|
32.3 |
Volume |
---|
35.3 |
Volume |
---|
73 |
Volume |
---|
138 |
Volume |
---|
170 |
Volume |
---|
300 |
Volume |
---|
328 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
MLR050 |
MLR075 |
MLR100 |
MLR125 |
MLR150 |
MLR200 |
MLR250 |
MLR300 |
MLR350 |
MLR400 |
Volume |
---|
4.5 |
Volume |
---|
7.5 |
Volume |
---|
12.5 |
Volume |
---|
32.3 |
Volume |
---|
35.3 |
Volume |
---|
73 |
Volume |
---|
138 |
Volume |
---|
170 |
Volume |
---|
300 |
Volume |
---|
328 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
MLT050 |
MLT075 |
MLT100 |
MLT125 |
MLT150 |
MLT200 |
MLT250 |
MLT300 |
MLT350 |
MLT400 |
Volume |
---|
6 |
Volume |
---|
9.5 |
Volume |
---|
15 |
Volume |
---|
33 |
Volume |
---|
36 |
Volume |
---|
75 |
Volume |
---|
138 |
Volume |
---|
170 |
Volume |
---|
300 |
Volume |
---|
328 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
MLB050 |
MLB075 |
MLB100 |
MLB125 |
MLB150 |
MLB200 |
MLB250 |
MLB300 |
MLB350 |
MLB400 |
Volume |
---|
4.5 |
Volume |
---|
7.5 |
Volume |
---|
12.5 |
Volume |
---|
32.3 |
Volume |
---|
35.3 |
Volume |
---|
73 |
Volume |
---|
138 |
Volume |
---|
170 |
Volume |
---|
300 |
Volume |
---|
328 |
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
Model Number |
---|
MASQ037I |
MASQ050I |
MASQ075I |
MASQ100I |
MASQ125I |
MASQ150I |
MASQ200I |
MASQ250I |
MASQ300I |
MASQ350I |
MASQ400I |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LTSS050AN |
LTSS075AN |
LTSS100AN |
LTSS125AN |
LTSS150AN |
LTSS200AN |
LTSS250AN |
LTSS300AN |
LTSS350AN |
LTSS400AN |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
33.1 |
Volume |
---|
33.1 |
Volume |
---|
67 |
Volume |
---|
149 |
Volume |
---|
175 |
Volume |
---|
298 |
Volume |
---|
300 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LTSS050CG |
LTSS075CG |
LTSS100CG |
LTSS125CG |
LTSS150CG |
LTSS200CG |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
33.1 |
Volume |
---|
33.1 |
Volume |
---|
67 |
Used to terminate flexible metal conduit, armored or metal clad cables to an enclosure or outlet box
Model Number |
---|
MASQ037 |
MASQ050 |
MASQ075 |
MASQ100 |
MASQ125 |
MASQ150 |
MASQ200 |
MASQ250 |
MASQ300 |
MASQ350 |
MASQ400 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LTSS050 |
LTSS075 |
LTSS100 |
LTSS125 |
LTSS150 |
LTSS200 |
LTSS250 |
LTSS300 |
LTSS350 |
LTSS400 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
33.1 |
Volume |
---|
33.1 |
Volume |
---|
67 |
Volume |
---|
149 |
Volume |
---|
175 |
Volume |
---|
298 |
Volume |
---|
300 |
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LTC050 |
LTC075 |
LTC100 |
LTC125 |
LTC150 |
LTC200 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
33.1 |
Volume |
---|
33.1 |
Volume |
---|
67 |
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LTC050AN |
LTC075AN |
LTC100AN |
LTC125AN |
LTC150AN |
LTC200AN |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
33.1 |
Volume |
---|
33.1 |
Volume |
---|
67 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LT050CG |
LT075CG |
LT100CG |
LT125CG |
LT150CG |
LT200CG |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
33.1 |
Volume |
---|
33.1 |
Volume |
---|
67 |
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
Model Number |
---|
LTA037 |
LTA050 |
LTA075 |
LTA075U |
LTA100 |
LTA125 |
LTA150 |
LTA200 |
LTA250 |
LTA300 |
LTA350 |
LTA400 |
A | B | C |
---|---|---|
1.46 | 1.12 | 0.48 |
A | B | C |
---|---|---|
1.6 | 1.37 | 0.56 |
A | B | C |
---|---|---|
2.37 | 1.66 | 0.72 |
A | B | C |
---|---|---|
2.31 | 2.13 | 0.67 |
A | B | C |
---|---|---|
2.5 | 2.42 | 0.67 |
A | B | C |
---|---|---|
2.8 | 2.94 | 0.67 |
Used to terminate and seal liquid-tight flexible metal and non-metallic type B conduit to a box or enclosure at a 90° angle
Model Number |
---|
LTA037I |
LTA050I |
LTA075I |
LTA100I |
LTA125I |
LTA150I |
LTA200I |
LTA250I |
LTA300I |
LTA350I |
LTA400I |
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number |
---|
LT050AN |
LT075AN |
LT100AN |
LT125AN |
LT150AN |
LT200AN |
LT250AN |
LT300AN |
LT350AN |
LT400AN |
A | B | C | Volume |
---|---|---|---|
4.4 | 2.1 | 1.6 | 4.35 |
A | B | C | Volume |
---|---|---|---|
5.5 | 2.3 | 1.9 | 7.3 |
A | B | C | Volume |
---|---|---|---|
6.22 | 1.75 | 2.07 | 12.2 |
A | B | C | Volume |
---|---|---|---|
8.27 | 2.48 | 2.84 | 33.1 |
A | B | C | Volume |
---|---|---|---|
8.27 | 2.48 | 2.84 | 33.1 |
A | B | C | Volume |
---|---|---|---|
10.24 | 3.13 | 3.58 | 67 |
Volume |
---|
149 |
Volume |
---|
175 |
Volume |
---|
298 |
Volume |
---|
300 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LRSS050AN |
LRSS075AN |
LRSS100AN |
LRSS125AN |
LRSS150AN |
LRSS200AN |
LRSS250AN |
LRSS300AN |
LRSS350AN |
LRSS400AN |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.8 |
Volume |
---|
35.1 |
Volume |
---|
69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LRSS050CG |
LRSS075CG |
LRSS100CG |
LRSS125CG |
LRSS150CG |
LRSS200CG |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.8 |
Volume |
---|
35.1 |
Volume |
---|
69.7 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LT050 |
LT075 |
LT100 |
LT125 |
LT150 |
LT200 |
LT250 |
LT300 |
LT350 |
LT400 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
33.1 |
Volume |
---|
33.1 |
Volume |
---|
67 |
Volume |
---|
149 |
Volume |
---|
175 |
Volume |
---|
298 |
Volume |
---|
300 |
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LRC050AN |
LRC075AN |
LRC100AN |
LRC125AN |
LRC150AN |
LRC200AN |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.8 |
Volume |
---|
35.1 |
Volume |
---|
69.7 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LR050CG |
LR075CG |
LR100CG |
LR125CG |
LR150CG |
LR200CG |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.8 |
Volume |
---|
35.1 |
Volume |
---|
69.7 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LRSS050 |
LRSS075 |
LRSS100 |
LRSS125 |
LRSS150 |
LRSS200 |
LRSS250 |
LRSS300 |
LRSS350 |
LRSS400 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.8 |
Volume |
---|
35.1 |
Volume |
---|
69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LR050 |
LR075 |
LR100 |
LR125 |
LR150 |
LR200 |
LR250 |
LR300 |
LR350 |
LR400 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.8 |
Volume |
---|
35.1 |
Volume |
---|
69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.,Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LR050AN |
LR075AN |
LR100AN |
LR125AN |
LR150AN |
LR200AN |
LR250AN |
LR300AN |
LR350AN |
LR400AN |
A | B | C | Volume |
---|---|---|---|
4.4 | 2.1 | 1.6 | 4.35 |
A | B | C | Volume |
---|---|---|---|
5.1 | 2.3 | 1.9 | 7.3 |
A | B | C | Volume |
---|---|---|---|
5.8 | 1.75 | 2.07 | 12.2 |
A | B | C | Volume |
---|---|---|---|
7.76 | 2.48 | 2.84 | 35.8 |
A | B | C | Volume |
---|---|---|---|
7.76 | 2.48 | 2.84 | 35.1 |
A | B | C | Volume |
---|---|---|---|
9.84 | 3.13 | 3.59 | 69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LRC050 |
LRC075 |
LRC100 |
LRC125 |
LRC150 |
LRC200 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.8 |
Volume |
---|
35.1 |
Volume |
---|
69.7 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LLSS050AN |
LLSS075AN |
LLSS100AN |
LLSS125AN |
LLSS150AN |
LLSS200AN |
LLSS250AN |
LLSS300AN |
LLSS350AN |
LLSS400AN |
Volume |
---|
4.3 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.4 |
Volume |
---|
35.6 |
Volume |
---|
69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LLSS050CG |
LLSS075CG |
LLSS100CG |
LLSS125CG |
LLSS150CG |
LLSS200CG |
Volume |
---|
4.3 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.4 |
Volume |
---|
35.6 |
Volume |
---|
69.7 |
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LLC050AN |
LLC075AN |
LLC100AN |
LLC125AN |
LLC150AN |
LLC200AN |
Volume |
---|
4.3 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.4 |
Volume |
---|
35.6 |
Volume |
---|
69.7 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LL050CG |
LL075CG |
LL100CG |
LL125CG |
LL150CG |
LL200CG |
Volume |
---|
4.3 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.4 |
Volume |
---|
35.6 |
Volume |
---|
69.7 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LLSS050 |
LLSS075 |
LLSS100 |
LLSS125 |
LLSS150 |
LLSS200 |
LLSS250 |
LLSS300 |
LLSS350 |
LLSS400 |
Volume |
---|
4.3 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.4 |
Volume |
---|
35.6 |
Volume |
---|
69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LL050 |
LL075 |
LL100 |
LL125 |
LL150 |
LL200 |
LL250 |
LL300 |
LL350 |
LL400 |
Volume |
---|
4.3 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.4 |
Volume |
---|
35.6 |
Volume |
---|
69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number |
---|
LL050AN |
LL075AN |
LL100AN |
LL125AN |
LL150AN |
LL200AN |
LL250AN |
LL300AN |
LL350AN |
LL400AN |
A | B | C | Volume |
---|---|---|---|
4.4 | 2.1 | 1.6 | 4.3 |
A | B | C | Volume |
---|---|---|---|
5.1 | 2.3 | 1.9 | 7.3 |
A | B | C | Volume |
---|---|---|---|
5.8 | 1.75 | 2.07 | 12.2 |
A | B | C | Volume |
---|---|---|---|
7.76 | 2.48 | 2.84 | 35.4 |
A | B | C | Volume |
---|---|---|---|
7.76 | 2.48 | 2.84 | 35.6 |
A | B | C | Volume |
---|---|---|---|
9.84 | 3.13 | 3.59 | 69.7 |
Volume |
---|
158 |
Volume |
---|
186 |
Volume |
---|
306 |
Volume |
---|
308 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LLC050 |
LLC075 |
LLC100 |
LLC125 |
LLC150 |
LLC200 |
Volume |
---|
4.3 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
35.4 |
Volume |
---|
35.6 |
Volume |
---|
69.7 |
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LBSS050CG |
LBSS075CG |
LBSS100CG |
LBSS125CG |
LBSS150CG |
LBSS200CG |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
32.3 |
Volume |
---|
33.8 |
Volume |
---|
71.2 |
Mogul conduit bodies are used to gain greater access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number |
---|
LBMO125CG |
LBMO150CG |
LBMO200CG |
A | B | C | Volume |
---|---|---|---|
9.67 | 2.52 | 4.29 | 40 |
A | B | C | Volume |
---|---|---|---|
14.57 | 3.19 | 6.32 | 128 |
A | B | C | Volume |
---|---|---|---|
14.57 | 3.19 | 6.32 | 128 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LBSS050 |
LBSS075 |
LBSS100 |
LBSS125 |
LBSS150 |
LBSS200 |
LBSS250 |
LBSS300 |
LBSS350 |
LBSS400 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
32.3 |
Volume |
---|
33.8 |
Volume |
---|
71.2 |
Volume |
---|
153 |
Volume |
---|
183.5 |
Volume |
---|
304.9 |
Volume |
---|
308 |
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction. Pre-assembled with a cover and gasket. For dry location applications.
Model Number |
---|
LBSS050AN |
LBSS075AN |
LBSS100AN |
LBSS125AN |
LBSS150AN |
LBSS200AN |
LBSS250AN |
LBSS300AN |
LBSS350AN |
LBSS400AN |
A | B | C | Volume |
---|---|---|---|
4.34 | 1.31 | 2.4 | 4.35 |
A | B | C | Volume |
---|---|---|---|
5.09 | 1.54 | 2.6 | 7.3 |
Volume |
---|
12.2 |
Volume |
---|
32.3 |
Volume |
---|
33.8 |
Volume |
---|
71.2 |
Volume |
---|
153 |
Volume |
---|
183.5 |
Volume |
---|
304.9 |
Volume |
---|
308 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LBC050 |
LBC075 |
LBC0100 |
LBC0125 |
LBC150 |
LBC200 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
32.3 |
Volume |
---|
33.8 |
Volume |
---|
71.2 |
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
LBC050AN |
LBC075AN |
LBC100AN |
LBC125AN |
LBC150AN |
LBC200AN |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
32.3 |
Volume |
---|
33.8 |
Volume |
---|
71.2 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LB050CG |
LB075CG |
LB100CG |
LB125CG |
LB150CG |
LB200CG |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
32.3 |
Volume |
---|
33.8 |
Volume |
---|
71.2 |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
LB050 |
LB075 |
LB100 |
LB125 |
LB150 |
LB200 |
LB250 |
LB300 |
LB350 |
LB400 |
Volume |
---|
4.35 |
Volume |
---|
7.3 |
Volume |
---|
12.2 |
Volume |
---|
32.3 |
Volume |
---|
33.8 |
Volume |
---|
71.2 |
Volume |
---|
153 |
Volume |
---|
183.5 |
Volume |
---|
304.9 |
Volume |
---|
308 |
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number |
---|
LB050AN |
LB075AN |
LB100AN |
LB125AN |
LB150AN |
LB200AN |
LB250AN |
LB300AN |
LB350AN |
LB400AN |
A | B | C | Volume |
---|---|---|---|
4.3 | 1.3 | 2.4 | 4.35 |
A | B | C | Volume |
---|---|---|---|
5 | 1.5 | 2.6 | 7.3 |
A | B | C | Volume |
---|---|---|---|
5.8 | 1.8 | 2.9 | 12.2 |
A | B | C | Volume |
---|---|---|---|
7.8 | 2.5 | 3.7 | 32.3 |
A | B | C | Volume |
---|---|---|---|
7.8 | 2.5 | 3.9 | 33.8 |
A | B | C | Volume |
---|---|---|---|
9.8 | 3.2 | 4.7 | 71.2 |
A | B | C | Volume |
---|---|---|---|
12.83 | 4.44 | 5.35 | 153 |
A | B | C | Volume |
---|---|---|---|
12.83 | 4.44 | 5.96 | 183.5 |
Volume |
---|
304.9 |
Volume |
---|
308 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
90° elbows are used to connect steel EMT conduit together to allow for 90° bends.
Model Number |
---|
EEN050 |
EEN075 |
EEN100 |
EEN125 |
EEN150 |
EEN200 |
A | B | C |
---|---|---|
0.71 | 4.02 | 6.25 |
A | B | C |
---|---|---|
0.92 | 4.49 | 7.06 |
A | B | C |
---|---|---|
1.16 | 5.75 | 9.25 |
A | B | C |
---|---|---|
1.51 | 7.24 | 10.5 |
A | B | C |
---|---|---|
1.74 | 8.27 | 12.63 |
A | B | C |
---|---|---|
2.2 | 9.49 | 14.25 |
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
Model Number |
---|
CNA507N |
CNA509N |
CNA5011N |
CNA5012N |
CNA5013N |
CNA7510N |
CNA7512N |
CNA7514N |
CNA7516N |
CNA7518N |
CNA7519N |
CNA10014N |
CNA10016N |
CNA10019N |
CNA10020N |
CNA10021N |
CNA10023N |
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
Model Number |
---|
CNA375 |
CNA377 |
CNA379 |
CNA3711 |
CNA3712 |
CNA503 |
CNA505 |
CNA507 |
CNA509 |
CNA5011 |
CNA5012 |
CNA5013 |
CNA5015 |
CNA5017 |
CNA757 |
CNA7510 |
CNA7512 |
CNA7514 |
CNA7516 |
CNA7518 |
CNA7519 |
CNA7520 |
CNA10014 |
CNA10016 |
CNA10018 |
CNA10019 |
CNA10020 |
CNA10021 |
CNA10022 |
CNA10023 |
CNA10024 |
CNA12521 |
CNA12523 |
CNA12524 |
CNA12525 |
CNA12526 |
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
Model Number |
---|
CNA507M |
CNA509M |
CNA5011M |
CNA5012M |
CNA5013M |
CNA5015M |
CNA5017M |
CNA7510M |
CNA7512M |
CNA7514M |
CNA7516M |
CNA7518M |
CNA7519M |
CNA7520M |
CNA10018M |
CNA10019M |
CNA10020M |
CNA10021M |
CNA10023M |
Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection, and maintenance
Model Number |
---|
CLBC050AN |
CLBC075AN |
CLBC100AN |
CLBC125AN |
CLBC150AN |
CLBC200AN |
Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance
Model Number |
---|
CLB050AN |
CLB075AN |
CLB100AN |
CLB125AN |
CLB150AN |
CLB200AN |
Inside corner pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit where it is essential to make tight turns within limited available space.
Model Number |
---|
CE050 |
CE075 |
A | B | C |
---|---|---|
1.8 | 0.93 | 0.72 |
A | B | C |
---|---|---|
2 | 1.13 | 0.93 |
Used to create floor mounts and ceiling drops in poured concrete
Model Number |
---|
CEB050 |
CEB075 |
CEB100 |
Used to seal, provide strain relief and terminate portable or flexible cords to metal enclosure or box
Model Number |
---|
CGA5025M |
CGA501M |
CGA502M |
CGA504M |
CGA751M |
CGA752M |
CGA754M |
CGA755M |
CGA1002M |
CGA1004M |
CGA1005M |
CGA1006M |
CGA1007M |
CGA1256M |
CGA1257M |
CGA1258M |
CGA1259M |
CGA12510M |
CGA1506M |
CGA1507M |
CGA1508M |
CGA1509M |
CGA15010M |
CGA20010M |
CGA20011M |
CGA20012M |
CGA20013M |
CGA20014M |
CGA20015M |
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number |
---|
ASQ037 |
ASQ050 |
ASQ075 |
ASQ100 |
ASQ125 |
ASQ150 |
ASQ200 |
ASQ250 |
ASQ300 |
ASQ350 |
ASQ400 |
A | B | C |
---|---|---|
1.18 | 1.29 | 0.39 |
A | B | C |
---|---|---|
1.51 | 1.63 | 0.44 |
A | B | C |
---|---|---|
1.65 | 1.89 | 0.43 |
A | B | C |
---|---|---|
2.13 | 2.3 | 0.53 |
A | B | C |
---|---|---|
3.01 | 2.7 | 0.59 |
A | B | C |
---|---|---|
4.8 | 3.59 | 0.71 |
A | B | C |
---|---|---|
4.8 | 3.59 | 0.71 |
Double Snap Lock® 90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
Model Number |
---|
ASQ037DSI |
ASQ050DSI |
A | B | C |
---|---|---|
1.37 | 1.73 | 0 |
A | B | C |
---|---|---|
1.68 | 2.06 | 0 |
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number |
---|
ASQ037I |
ASQ050I |
ASQ075I |
ASQ100I |
ASQ125I |
ASQ150I |
ASQ200I |
ASQ250I |
ASQ300I |
ASQ350I |
ASQ400I |
A | B | C |
---|---|---|
1.18 | 1.3 | 0.46 |
A | B | C |
---|---|---|
1.51 | 1.63 | 0.51 |
A | B | C |
---|---|---|
1.65 | 1.89 | 0.51 |
90° set screw type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number |
---|
ASCN050 |
ASCN075 |
A | B | C |
---|---|---|
1.43 | 1.19 | 0.48 |
A | B | C |
---|---|---|
1.47 | 1.42 | 0.54 |
90° compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number |
---|
ACCN050 |
ACCN075 |
ACCN100 |
A | B | C |
---|---|---|
1.35 | 0.98 | 0.51 |
A | B | C |
---|---|---|
1.47 | 1.23 | 0.52 |
A | B | C |
---|---|---|
2.17 | 1.52 | 0.68 |
Service entrance ells are used for Rigid conduit or IMC to gain access to the interior of a raceway for wire pulling, inspection and maintenance.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-51025 | 1 | 10 | Polybag |
02-51026 | 1 | 5 | Polybag |
02-51027 | 1 | 3 | Polybag |
02-51028 | 1 | 2 | Polybag |
02-51029 | 1 | 2 | Polybag |
02-51030 | 1 | 2 | Polybag |
A | B | C |
---|---|---|
3.15 | 1.19 | 1.45 |
A | B | C |
---|---|---|
3.57 | 1.52 | 1.77 |
A | B | C |
---|---|---|
4.18 | 1.75 | 1.97 |
A | B | C |
---|---|---|
5.39 | 2.19 | 2.44 |
A | B | C |
---|---|---|
6.1 | 2.36 | 2.44 |
A | B | C |
---|---|---|
6.61 | 2.87 | 2.93 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
90° rigid elbows are used to connect Rigid conduit or IMC together to allow for 90° bends.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55531PE | 1 | 5 | Boxed - Individual UPC |
02-55532PE | 1 | 5 | Boxed - Individual UPC |
02-55533PE | 1 | 6 | Boxed - Individual UPC |
02-55534PE | 1 | 3 | Boxed - Individual UPC |
02-55535PE | 1 | 3 | Boxed - Individual UPC |
02-55536PE | 1 | 2 | Boxed - Individual UPC |
55537-PE | 1 | 1 | Boxed - Individual UPC |
55538-PE | 1 | 1 | Boxed - Individual UPC |
A | B | C |
---|---|---|
4.02 | 6.38 | 1.5 |
A | B | C |
---|---|---|
4.49 | 7.44 | 1.5 |
A | B | C |
---|---|---|
5.75 | 8.84 | 1.89 |
A | B | C |
---|---|---|
7.24 | 10.12 | 2.01 |
A | B | C |
---|---|---|
8.27 | 11.94 | 2.01 |
A | B | C |
---|---|---|
9.49 | 14.08 | 2.01 |
A | B | C |
---|---|---|
10.5 | 16 | 5.25 |
A | B | C |
---|---|---|
13 | 18.95 | 5.81 |
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49490 | 1 | 20 | Polybag |
49491 | 1 | 20 | Polybag |
02-55492 | 1 | 10 | Boxed - Individual UPC |
A | B | C |
---|---|---|
1.35 | 1.06 | 0.54 |
A | B | C |
---|---|---|
1.63 | 1.32 | 0.63 |
A | B | C |
---|---|---|
1.87 | 1.6 | 0.69 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
EMT-to-EMT pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49561 | 1 | 10 | Polybag |
44561 | 2 | 20 | Polybag |
49562 | 1 | 10 | Polybag |
44562 | 2 | 5 | Polybag |
02-55563 | 1 | 10 | Boxed - Individual UPC |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
A | B | C |
---|---|---|
1.95 | 1.57 | 1.46 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Rigid-to-box pull elbows are used to connect threaded Rigid conduit or IMC to a box where a 90° bend is required. They facilitate pulling conductors through the bend and the removable cover gives ample access so that wire pulling can be achieved without any obstructions.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49671 | 1 | 10 | Polybag |
49672 | 1 | 5 | Polybag |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Rigid-to-rigid pull elbows are used to facilitate pulling conductors through a 90° bend between two runs of threaded Rigid conduit or IMC. The removable cover gives ample access so that wire pulling can be achieved without any obstructions.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49681 | 1 | 10 | Polybag |
49682 | 1 | 10 | Polybag |
02-55683 | 1 | 10 | Boxed - Individual UPC |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
A | B | C |
---|---|---|
1.95 | 1.57 | 1.46 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Combination to box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of IMC, Rigid or steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
46074 | 1 | 10 | Polybag |
46075 | 1 | 5 | Polybag |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Combination pull elbows are used to facilitate pulling conductors through a 90° bend in two runs of IMC, Rigid or steel EMT conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
46077 | 1 | 10 | Polybag |
46078 | 1 | 10 | Polybag |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
EMT-to-box pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit that terminates at a knockout in a metal box or enclosure. The removable cover gives ample access so that wire pulling can be achieved without any obstruction. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49551 | 1 | 10 | Polybag |
55551 | 10 | 10 | Bulk - No individual UPC |
49552 | 1 | 10 | Polybag |
55552 | 5 | 10 | Bulk - No individual UPC |
A | B | C |
---|---|---|
1.31 | 1 | 0.92 |
A | B | C |
---|---|---|
1.34 | 0.93 | 0.72 |
A | B | C |
---|---|---|
1.37 | 1.27 | 1.17 |
A | B | C |
---|---|---|
1.71 | 1.14 | 0.93 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
45763 | 1 | 15 | Polybag |
45764 | 1 | 10 | Polybag |
45765 | 1 | 5 | Boxed - Individual UPC |
A | B | C |
---|---|---|
1.25 | 1.13 | 0.53 |
A | B | C |
---|---|---|
1.58 | 1.31 | 0.53 |
A | B | C |
---|---|---|
1.84 | 1.64 | 0.66 |
90° liquid-tight connectors are used to terminate and seal Liquid-Tight Flexible Metal and/or
Non-Metallic Type B Conduits at 90° angles to an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49470 | 1 | 10 | Polybag |
49471 | 1 | 10 | Polybag |
02-55472LT | 1 | 10 | Boxed - Individual UPC |
02-55473LT | 1 | 10 | Boxed - Individual UPC |
02-55474LT | 1 | 4 | Boxed - Individual UPC |
02-55475LT | 1 | 4 | Boxed - Individual UPC |
A | B | C |
---|---|---|
1.46 | 1.12 | 0.48 |
A | B | C |
---|---|---|
1.6 | 1.37 | 0.56 |
A | B | C |
---|---|---|
2.37 | 1.66 | 0.72 |
A | B | C |
---|---|---|
2.31 | 2.13 | 0.67 |
A | B | C |
---|---|---|
2.5 | 2.42 | 0.67 |
A | B | C |
---|---|---|
2.8 | 2.94 | 0.67 |
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55641T | 1 | 5 | Boxed - Individual UPC |
02-55642T | 1 | 5 | Boxed - Individual UPC |
02-55643T | 1 | 2 | Boxed - Individual UPC |
02-55644T | 1 | 2 | Boxed - Individual UPC |
02-55645T | 1 | 2 | Boxed - Individual UPC |
02-55646T | 1 | 2 | Boxed - Individual UPC |
A | B | C |
---|---|---|
4.4 | 2.1 | 1.6 |
A | B | C |
---|---|---|
5.5 | 2.3 | 1.9 |
A | B | C |
---|---|---|
6.22 | 1.75 | 2.07 |
A | B | C |
---|---|---|
8.27 | 2.48 | 2.84 |
A | B | C |
---|---|---|
8.27 | 2.48 | 2.84 |
A | B | C |
---|---|---|
10.24 | 3.13 | 3.58 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55641LL | 1 | 5 | Boxed - Individual UPC |
02-55642LL | 1 | 3 | Boxed - Individual UPC |
02-55643LL | 1 | 2 | Boxed - Individual UPC |
02-55644LL | 1 | 2 | Boxed - Individual UPC |
02-55645LL | 1 | 2 | Boxed - Individual UPC |
02-55646LL | 1 | 2 | Boxed - Individual UPC |
A | B | C |
---|---|---|
4.4 | 2.1 | 1.6 |
A | B | C |
---|---|---|
5.1 | 2.3 | 1.9 |
A | B | C |
---|---|---|
5.8 | 1.75 | 2.07 |
A | B | C |
---|---|---|
7.76 | 2.48 | 2.84 |
A | B | C |
---|---|---|
7.76 | 2.48 | 2.84 |
A | B | C |
---|---|---|
9.84 | 3.13 | 3.59 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Combination conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction. Pre-assembled with two covers and gaskets for configuration as LL or LR conduit body.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55941LLR | 1 | 5 | Polybag |
02-55942LLR | 1 | 5 | Polybag |
A | B | C |
---|---|---|
4.4 | 1.94 | 2.07 |
A | B | C |
---|---|---|
5.07 | 2.18 | 2.29 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55641LR | 1 | 5 | Boxed - Individual UPC |
02-55642LR | 1 | 3 | Boxed - Individual UPC |
02-55643LR | 1 | 2 | Boxed - Individual UPC |
02-55644LR | 1 | 2 | Boxed - Individual UPC |
02-55645LR | 1 | 2 | Boxed - Individual UPC |
02-55646LR | 1 | 2 | Boxed - Individual UPC |
A | B | C |
---|---|---|
4.4 | 2.1 | 1.6 |
A | B | C |
---|---|---|
5.1 | 2.3 | 1.9 |
A | B | C |
---|---|---|
5.8 | 1.75 | 2.07 |
A | B | C |
---|---|---|
7.76 | 2.48 | 2.84 |
A | B | C |
---|---|---|
7.76 | 2.48 | 2.84 |
A | B | C |
---|---|---|
9.84 | 3.13 | 3.59 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction. Pre-assembled with a cover and gasket. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55841LB | 1 | 5 | Boxed - Individual UPC |
02-55842LB | 1 | 5 | Boxed - Individual UPC |
A | B | C |
---|---|---|
4.34 | 1.31 | 2.4 |
A | B | C |
---|---|---|
5.09 | 1.54 | 2.6 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55641LB | 1 | 10 | Boxed - Individual UPC |
02-55642LB | 1 | 10 | Boxed - Individual UPC |
02-55643LB | 1 | 5 | Boxed - Individual UPC |
02-55644LB | 1 | 2 | Boxed - Individual UPC |
02-55645LB | 1 | 2 | Boxed - Individual UPC |
02-55646LB | 1 | 2 | Boxed - Individual UPC |
02-55647LB | 1 | 1 | Boxed - Individual UPC |
02-55648LB | 1 | 1 | Boxed - Individual UPC |
A | B | C |
---|---|---|
4.3 | 1.3 | 2.4 |
A | B | C |
---|---|---|
5 | 1.5 | 2.6 |
A | B | C |
---|---|---|
5.8 | 1.8 | 2.9 |
A | B | C |
---|---|---|
7.8 | 2.5 | 3.7 |
A | B | C |
---|---|---|
7.8 | 2.5 | 3.9 |
A | B | C |
---|---|---|
9.8 | 3.2 | 4.7 |
A | B | C |
---|---|---|
12.83 | 4.44 | 5.35 |
A | B | C |
---|---|---|
12.83 | 4.44 | 5.96 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Mogul conduit bodies are used to gain greater access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-51128 | 1 | 2 | Boxed - Individual UPC |
02-51129 | 1 | 1 | Boxed - Individual UPC |
02-51130 | 1 | 1 | Boxed - Individual UPC |
A | B | C |
---|---|---|
9.67 | 2.52 | 4.29 |
A | B | C |
---|---|---|
14.57 | 3.19 | 6.32 |
A | B | C |
---|---|---|
14.57 | 3.19 | 6.32 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
90° elbows are used to connect steel EMT conduit together to allow for 90° bends.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
02-55541PE | 1 | 15 | Polybag |
02-55542PE | 1 | 10 | Polybag |
02-55543PE | 1 | 10 | Polybag |
02-55544PE | 1 | 5 | Polybag |
02-55545PE | 1 | 4 | Polybag |
02-55546PE | 1 | 2 | Polybag |
A | B | C |
---|---|---|
0.71 | 4.02 | 6.25 |
A | B | C |
---|---|---|
0.92 | 4.49 | 7.06 |
A | B | C |
---|---|---|
1.16 | 5.75 | 9.25 |
A | B | C |
---|---|---|
1.51 | 7.24 | 10.5 |
A | B | C |
---|---|---|
1.74 | 8.27 | 12.63 |
A | B | C |
---|---|---|
2.2 | 9.49 | 14.25 |
Inside corner pull elbows are used to facilitate pulling conductors through a 90° bend in a run of steel EMT conduit where it is essential to make tight turns within limited available space.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49591 | 1 | 10 | Polybag |
44591 | 2 | 20 | Polybag |
49592 | 1 | 10 | Polybag |
44592 | 2 | 5 | Polybag |
A | B | C |
---|---|---|
1.8 | 0.93 | 0.72 |
A | B | C |
---|---|---|
2 | 1.13 | 0.93 |
Double Snap Lock® 90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. The patented Double Snap Lock® design provides a faster installation. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49815 | 2 | 6 | Polybag |
49816 | 1 | 12 | Polybag |
A | B |
---|---|
1.37 | 1.73 |
A | B |
---|---|
1.68 | 2.06 |
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
69801 | 1 | 50 | Polybag |
69804 | 1 | 20 | Polybag |
69806 | 1 | 20 | Polybag |
A | B | C |
---|---|---|
1.18 | 1.3 | 0.46 |
A | B | C |
---|---|---|
1.51 | 1.63 | 0.51 |
A | B | C |
---|---|---|
1.65 | 1.89 | 0.51 |
90° set screw type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49047 | 1 | 25 | Polybag |
44047 | 2 | 20 | Polybag |
44048 | 2 | 5 | Polybag |
A | B | C |
---|---|---|
1.43 | 1.19 | 0.48 |
A | B | C |
---|---|---|
1.47 | 1.42 | 0.54 |
90° squeeze connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49801 | 1 | 50 | Polybag |
44801 | 2 | 20 | Polybag |
55801M | 50 | 2 | Contractor Pack |
49804 | 1 | 20 | Polybag |
55804 | 25 | 10 | Bulk - No individual UPC |
55804M | 25 | 2 | Contractor Pack |
49806 | 1 | 6 | Polybag |
55806 | 10 | 10 | Bulk - No individual UPC |
02-55807 | 1 | 10 | Boxed - Individual UPC |
02-55808 | 1 | 10 | Boxed - Individual UPC |
02-55809 | 1 | 4 | Boxed - Individual UPC |
02-55810 | 1 | 4 | Boxed - Individual UPC |
A | B | C |
---|---|---|
1.18 | 1.29 | 0.39 |
A | B | C |
---|---|---|
1.51 | 1.63 | 0.44 |
A | B | C |
---|---|---|
1.65 | 1.89 | 0.43 |
A | B | C |
---|---|---|
2.13 | 2.3 | 0.53 |
A | B | C |
---|---|---|
3.01 | 2.7 | 0.59 |
A | B | C |
---|---|---|
4.8 | 3.59 | 0.71 |
A | B | C |
---|---|---|
4.8 | 3.59 | 0.71 |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
90° compression type connectors are used to secure and terminate steel EMT conduit to a knockout in a metal box or enclosure where a 90° bend is required. For dry location applications.
Model Number | Retail Pack | Master Pack | Package Type |
---|---|---|---|
49057 | 1 | 10 | Polybag |
44057 | 2 | 20 | Polybag |
49058 | 1 | 10 | Polybag |
44058 | 2 | 5 | Polybag |
02-56059 | 1 | 10 | Boxed - Individual UPC |
A | B | C |
---|---|---|
1.35 | 0.98 | 0.51 |
A | B | C |
---|---|---|
1.47 | 1.23 | 0.52 |
A | B | C |
---|---|---|
2.17 | 1.52 | 0.68 |